#include 
#include 
#include 
#include 
// ESP-NOW and WiFi includes disabled for minimal build
// #include 
// #include 
// #include 
// #include 
#include 
#include 
#include "faces.h"
// #include "boop.h"      // Disabled - no sensors in minimal build
// #include "speech.h"    // Disabled - no sensors in minimal build
// #include "espnowcom.h"  // Disabled - no wireless control yet
#include "scaling.h"
#include "oled_menu.h"

//#define ENABLE_BOOP 
//#define ENABLE_MIC 
#define double_buffer true

// Define display pins
#define R1_PIN 42
#define G1_PIN 41
#define B1_PIN 40
#define R2_PIN 14
#define G2_PIN 12
#define B2_PIN 13
#define A_PIN 19
#define B_PIN 16
#define C_PIN 5
#define D_PIN 17
#define E_PIN -1 // required for 1/32 scan panels, like 64x64. Any available pin would do, i.e. IO32
#define LAT_PIN 4
#define OE_PIN 15
#define CLK_PIN 18

// Button pin for face switching
#define BUTTON_PIN 21  // GPIO21 for face switching button

// Define global variables here (main.cpp is the main file)
volatile bool faceUpdateRequested = false;
volatile char requestedCommand = 0;
volatile bool displayUpdateNeeded = true;
const uint16_t* currentFaceBitmap = nullptr;
const char* currentFaceName = "Unknown";


unsigned long currentMillis = millis();

// Initialize MatrixPanel_I2S_DMA for LED panels
MatrixPanel_I2S_DMA *display = nullptr;
HUB75_I2S_CFG mxconfig(
  64, // Module width
  32, // Module height
  2  // Chain length

);

// QuickEspNow espnow;  // Disabled for minimal build

SemaphoreHandle_t displayMutex = xSemaphoreCreateMutex();

void Task2code(void * pvParameters);
// ESP-NOW functions temporarily disabled
// extern void processFaceUpdate();

hw_timer_t * timer = NULL;
portMUX_TYPE timerMux = portMUX_INITIALIZER_UNLOCKED;

/// Predefining up task variables for dual core operation
TaskHandle_t Task1; 
TaskHandle_t Task2;

// Function to draw a bitmap to the display with mirroring on the second panel
void drawBitmap(const uint16_t* bitmap, int16_t x, int16_t y, int16_t width, int16_t height) {
    if (bitmap == nullptr) {
        ESP_LOGE("DRAW", "Bitmap is null");
        return;
    }
    // Draw on the first panel (left side, 0-63)
    for (int16_t j = 0; j < height; j++) {
        for (int16_t i = 0; i < width && i < 64; i++) {
            uint16_t color = pgm_read_word(&bitmap[j * width + i]);
            
            // Enhance brightness by boosting RGB components
            uint8_t r = ((color >> 11) & 0x1F) > 5) & 0x3F)  3) > 2) > 3);
            
            display->drawPixel(x + i, y + j, enhancedColor);
        }
    }
    // Draw mirrored on the second panel (right side, 64-127)
    for (int16_t j = 0; j < height; j++) {
        for (int16_t i = 0; i < width && i < 64; i++) {
            uint16_t color = pgm_read_word(&bitmap[j * width + i]);
            
            // Enhance brightness by boosting RGB components
            uint8_t r = ((color >> 11) & 0x1F) > 5) & 0x3F)  3) > 2) > 3);
            
            // Mirror horizontally by drawing at (127-i) instead of (64+i)
            display->drawPixel(127 - i, y + j, enhancedColor);
        }
    }
}

void setup() {
    Serial.begin(115200);
    while (!Serial && millis() < 3000); // Wait for serial to be ready
    
    ESP_LOGI("SETUP", "Starting setup with free heap: %d", ESP.getFreeHeap());
    ESP_LOGI("SETUP", "Initializing display...");

    // Configure pins explicitly
    mxconfig.gpio.r1 = R1_PIN;
    mxconfig.gpio.g1 = G1_PIN;
    mxconfig.gpio.b1 = B1_PIN;
    mxconfig.gpio.r2 = R2_PIN;
    mxconfig.gpio.g2 = G2_PIN;
    mxconfig.gpio.b2 = B2_PIN;
    mxconfig.gpio.a = A_PIN;
    mxconfig.gpio.b = B_PIN;
    mxconfig.gpio.c = C_PIN;
    mxconfig.gpio.d = D_PIN;
    mxconfig.gpio.e = E_PIN;
    mxconfig.gpio.lat = LAT_PIN;
    mxconfig.gpio.oe = OE_PIN;
    mxconfig.gpio.clk = CLK_PIN;
    
    // Set double buffering
    mxconfig.double_buff = double_buffer;

    mxconfig.i2sspeed = HUB75_I2S_CFG::HZ_20M;  // Fastest clock
    mxconfig.min_refresh_rate = 200;              // Minimum refresh rate for maximum brightness
    //mxconfig.latch_blanking = 1;                // Minimal blanking
    mxconfig.clkphase = true;                  // Try false for ICN2037BP
    
    // Initialize the display
    display = new MatrixPanel_I2S_DMA(mxconfig);
    if (display == nullptr) {
        ESP_LOGE("SETUP", "Error: Failed to allocate display memory");
        while(1) { delay(100); } // Halt execution
    }
    
    ESP_LOGI("SETUP", "Display allocated, beginning initialization...");
    
    if (not display->begin()) {
        ESP_LOGE("SETUP", "Error: Panel failed to initialize");
        delete display;
        display = nullptr;
        while(1) { delay(100); } // Halt execution
    }
    
    ESP_LOGI("SETUP", "Display initialized successfully with free heap: %d", ESP.getFreeHeap());
    
    display->setBrightness8(255);
    display->fillScreen(display->color565(0, 0, 0));
    
    // Initialize button for face switching
    pinMode(BUTTON_PIN, INPUT_PULLUP); // Use internal pullup resistor
    
    // Initialize the first face
    initFaces();
    setFace(0); // Start with the first face
    currentFaceBitmap = getCurrentFace();
    currentFaceName = getcurrentFaceName();
    
    Serial.printf("Protogen ready! Press button on GPIO%d to cycle faces.\n", BUTTON_PIN);
    Serial.printf("Starting with: %s\n", currentFaceName);

    //This sets up dual core processing
    xTaskCreatePinnedToCore(
        Task2code,    // Task function.
        "Task2",      // name of task.
        10000,        // Stack size of task
        NULL,         // parameter of the task
        10,           // priority of the task
        &Task2,       // Task handle to keep track of created task
        0             // pin task to core 0
    );

    // Initialize custom modules - minimal build
    // initBoop();     // Disabled - no sensors needed for now
    // initSpeech();   // Disabled - no sensors needed for now  
    initOLED();       // Keep OLED for status display
    // initESPNow();  // Disabled - ProtoPaw controller not needed yet
}

void loop() {
    // Minimal build - display management and button control
    
    // Handle button press for face switching
    static bool lastButtonState = HIGH;
    static unsigned long lastDebounceTime = 0;
    static int currentFaceIndex = 1; // Start with Calm_face (index 1)
    const unsigned long debounceDelay = 50; // 50ms debounce
    
    bool buttonReading = digitalRead(BUTTON_PIN);
    
    // Check if button state changed (with debounce)
    if (buttonReading != lastButtonState) {
        lastDebounceTime = millis();
    }
    
    if ((millis() - lastDebounceTime) > debounceDelay) {
        // Button state has been stable for debounce period
        if (buttonReading == LOW && lastButtonState == HIGH) {
            // Button was just pressed (HIGH to LOW transition)
            currentFaceIndex = (currentFaceIndex + 1) % 7; // Cycle through 7 faces
            setFace(currentFaceIndex);
            currentFaceBitmap = getCurrentFace();
            currentFaceName = getcurrentFaceName();
            displayUpdateNeeded = true; // Trigger display refresh
            
            Serial.printf("Button pressed! Face changed to: %s (index %d)\n", currentFaceName, currentFaceIndex);
        }
    }
    
    lastButtonState = buttonReading;
    
    // Update OLED info panel with current face status
    updateOLED(currentFaceBitmap, currentFaceName);

    // ESP-NOW face updates temporarily disabled for testing
    // Check and process face update
    // if (faceUpdateRequested) {
    //     faceUpdateRequested = false;  // Reset the flag
    //     processFaceUpdate();
    //     displayUpdateNeeded = true;  // Trigger display refresh
    // }
    
    // Face changes are now controlled by ESP-NOW commands only
    // Removed auto-cycling to prevent conflicts with ProtoPaw controller
    
    delay(10); // Small delay to prevent watchdog issues
}

// Note: displayUpdateNeeded is already declared as global variable above
static const uint16_t* lastDrawnFace = nullptr;

void Task2code(void * pvParameters) {
    ESP_LOGI("TASK2", "Display rendering task started");
    
    // Wait a bit for the display to be fully initialized
    vTaskDelay(1000 / portTICK_PERIOD_MS);
    
    for (;;) {
        // Only redraw if face changed or update requested
        if (displayUpdateNeeded || currentFaceBitmap != lastDrawnFace) {
            
            // Check if display is valid
            if (display == nullptr) {
                ESP_LOGE("TASK2", "Error: display is null");
                vTaskDelay(1000 / portTICK_PERIOD_MS);
                continue;
            }

            // Synchronize access to display
            if (xSemaphoreTake(displayMutex, pdMS_TO_TICKS(100))) {
                // Clear the display
                display->fillScreen(display->color565(0, 0, 0));
                
                // Draw the current face bitmap if available
                if (currentFaceBitmap != nullptr) {
                    drawBitmap(currentFaceBitmap, 0, 0, 64, 32);
                    lastDrawnFace = currentFaceBitmap;
                    ESP_LOGI("TASK2", "Face updated: %s", currentFaceName);
                }
                
                // Only flip if double buffering is enabled
                #if defined(double_buffer) && double_buffer == true
                display->flipDMABuffer();
                #endif
                
                displayUpdateNeeded = false;
                xSemaphoreGive(displayMutex);
            } else {
                ESP_LOGW("TASK2", "Failed to acquire display mutex");
            }
        }
        
        // Reduced frequency - only check every 50ms instead of 25ms
        vTaskDelay(50 / portTICK_PERIOD_MS);
    }
}