/*
** 2001 September 15
**
** The author disclaims copyright to this source code. In place of
** a legal notice, here is a blessing:
**
** May you do good and not evil.
** May you find forgiveness for yourself and forgive others.
** May you share freely, never taking more than you give.
**
*************************************************************************
** Internal interface definitions for SQLite.
**
*/
#ifndef _SQLITEINT_H_
#define _SQLITEINT_H_
/*
** These #defines should enable >2GB file support on POSIX if the
** underlying operating system supports it. If the OS lacks
** large file support, or if the OS is windows, these should be no-ops.
**
** Ticket #2739: The _LARGEFILE_SOURCE macro must appear before any
** system #includes. Hence, this block of code must be the very first
** code in all source files.
**
** Large file support can be disabled using the -DSQLITE_DISABLE_LFS switch
** on the compiler command line. This is necessary if you are compiling
** on a recent machine (ex: Red Hat 7.2) but you want your code to work
** on an older machine (ex: Red Hat 6.0). If you compile on Red Hat 7.2
** without this option, LFS is enable. But LFS does not exist in the kernel
** in Red Hat 6.0, so the code won't work. Hence, for maximum binary
** portability you should omit LFS.
**
** The previous paragraph was written in 2005. (This paragraph is written
** on 2008-11-28.) These days, all Linux kernels support large files, so
** you should probably leave LFS enabled. But some embedded platforms might
** lack LFS in which case the SQLITE_DISABLE_LFS macro might still be useful.
**
** Similar is true for Mac OS X. LFS is only supported on Mac OS X 9 and later.
*/
#ifndef SQLITE_DISABLE_LFS
# define _LARGE_FILE 1
# ifndef _FILE_OFFSET_BITS
# define _FILE_OFFSET_BITS 64
# endif
# define _LARGEFILE_SOURCE 1
#endif
/*
** For MinGW, check to see if we can include the header file containing its
** version information, among other things. Normally, this internal MinGW
** header file would [only] be included automatically by other MinGW header
** files; however, the contained version information is now required by this
** header file to work around binary compatibility issues (see below) and
** this is the only known way to reliably obtain it. This entire #if block
** would be completely unnecessary if there was any other way of detecting
** MinGW via their preprocessor (e.g. if they customized their GCC to define
** some MinGW-specific macros). When compiling for MinGW, either the
** _HAVE_MINGW_H or _HAVE__MINGW_H (note the extra underscore) macro must be
** defined; otherwise, detection of conditions specific to MinGW will be
** disabled.
*/
#if defined(_HAVE_MINGW_H)
# include "mingw.h"
#elif defined(_HAVE__MINGW_H)
# include "_mingw.h"
#endif
/*
** For MinGW version 4.x (and higher), check to see if the _USE_32BIT_TIME_T
** define is required to maintain binary compatibility with the MSVC runtime
** library in use (e.g. for Windows XP).
*/
#if !defined(_USE_32BIT_TIME_T) && !defined(_USE_64BIT_TIME_T) && \
defined(_WIN32) && !defined(_WIN64) && \
defined(__MINGW_MAJOR_VERSION) && __MINGW_MAJOR_VERSION >= 4 && \
defined(__MSVCRT__)
# define _USE_32BIT_TIME_T
#endif
/* The public SQLite interface. The _FILE_OFFSET_BITS macro must appear
** first in QNX. Also, the _USE_32BIT_TIME_T macro must appear first for
** MinGW.
*/
#include "sqlite3.h"
/*
** Include the configuration header output by 'configure' if we're using the
** autoconf-based build
*/
#ifdef _HAVE_SQLITE_CONFIG_H
#include "config.h"
#endif
#include "sqliteLimit.h"
/* Disable nuisance warnings on Borland compilers */
#if defined(__BORLANDC__)
#pragma warn -rch /* unreachable code */
#pragma warn -ccc /* Condition is always true or false */
#pragma warn -aus /* Assigned value is never used */
#pragma warn -csu /* Comparing signed and unsigned */
#pragma warn -spa /* Suspicious pointer arithmetic */
#endif
/* Needed for various definitions... */
#ifndef _GNU_SOURCE
# define _GNU_SOURCE
#endif
#if defined(__OpenBSD__) && !defined(_BSD_SOURCE)
# define _BSD_SOURCE
#endif
/*
** Include standard header files as necessary
*/
#ifdef HAVE_STDINT_H
#include
#endif
#ifdef HAVE_INTTYPES_H
#include
#endif
/*
** The following macros are used to cast pointers to integers and
** integers to pointers. The way you do this varies from one compiler
** to the next, so we have developed the following set of #if statements
** to generate appropriate macros for a wide range of compilers.
**
** The correct "ANSI" way to do this is to use the intptr_t type.
** Unfortunately, that typedef is not available on all compilers, or
** if it is available, it requires an #include of specific headers
** that vary from one machine to the next.
**
** Ticket #3860: The llvm-gcc-4.2 compiler from Apple chokes on
** the ((void*)&((char*)0)[X]) construct. But MSVC chokes on ((void*)(X)).
** So we have to define the macros in different ways depending on the
** compiler.
*/
#if defined(__PTRDIFF_TYPE__) /* This case should work for GCC */
# define SQLITE_INT_TO_PTR(X) ((void*)(__PTRDIFF_TYPE__)(X))
# define SQLITE_PTR_TO_INT(X) ((int)(__PTRDIFF_TYPE__)(X))
#elif !defined(__GNUC__) /* Works for compilers other than LLVM */
# define SQLITE_INT_TO_PTR(X) ((void*)&((char*)0)[X])
# define SQLITE_PTR_TO_INT(X) ((int)(((char*)X)-(char*)0))
#elif defined(HAVE_STDINT_H) /* Use this case if we have ANSI headers */
# define SQLITE_INT_TO_PTR(X) ((void*)(intptr_t)(X))
# define SQLITE_PTR_TO_INT(X) ((int)(intptr_t)(X))
#else /* Generates a warning - but it always works */
# define SQLITE_INT_TO_PTR(X) ((void*)(X))
# define SQLITE_PTR_TO_INT(X) ((int)(X))
#endif
/*
** The SQLITE_THREADSAFE macro must be defined as 0, 1, or 2.
** 0 means mutexes are permanently disable and the library is never
** threadsafe. 1 means the library is serialized which is the highest
** level of threadsafety. 2 means the library is multithreaded - multiple
** threads can use SQLite as long as no two threads try to use the same
** database connection at the same time.
**
** Older versions of SQLite used an optional THREADSAFE macro.
** We support that for legacy.
*/
#if !defined(SQLITE_THREADSAFE)
# if defined(THREADSAFE)
# define SQLITE_THREADSAFE THREADSAFE
# else
# define SQLITE_THREADSAFE 1 /* IMP: R-07272-22309 */
# endif
#endif
/*
** Powersafe overwrite is on by default. But can be turned off using
** the -DSQLITE_POWERSAFE_OVERWRITE=0 command-line option.
*/
#ifndef SQLITE_POWERSAFE_OVERWRITE
# define SQLITE_POWERSAFE_OVERWRITE 1
#endif
/*
** The SQLITE_DEFAULT_MEMSTATUS macro must be defined as either 0 or 1.
** It determines whether or not the features related to
** SQLITE_CONFIG_MEMSTATUS are available by default or not. This value can
** be overridden at runtime using the sqlite3_config() API.
*/
#if !defined(SQLITE_DEFAULT_MEMSTATUS)
# define SQLITE_DEFAULT_MEMSTATUS 1
#endif
/*
** Exactly one of the following macros must be defined in order to
** specify which memory allocation subsystem to use.
**
** SQLITE_SYSTEM_MALLOC // Use normal system malloc()
** SQLITE_WIN32_MALLOC // Use Win32 native heap API
** SQLITE_ZERO_MALLOC // Use a stub allocator that always fails
** SQLITE_MEMDEBUG // Debugging version of system malloc()
**
** On Windows, if the SQLITE_WIN32_MALLOC_VALIDATE macro is defined and the
** assert() macro is enabled, each call into the Win32 native heap subsystem
** will cause HeapValidate to be called. If heap validation should fail, an
** assertion will be triggered.
**
** If none of the above are defined, then set SQLITE_SYSTEM_MALLOC as
** the default.
*/
#if defined(SQLITE_SYSTEM_MALLOC) \
+ defined(SQLITE_WIN32_MALLOC) \
+ defined(SQLITE_ZERO_MALLOC) \
+ defined(SQLITE_MEMDEBUG)>1
# error "Two or more of the following compile-time configuration options\
are defined but at most one is allowed:\
SQLITE_SYSTEM_MALLOC, SQLITE_WIN32_MALLOC, SQLITE_MEMDEBUG,\
SQLITE_ZERO_MALLOC"
#endif
#if defined(SQLITE_SYSTEM_MALLOC) \
+ defined(SQLITE_WIN32_MALLOC) \
+ defined(SQLITE_ZERO_MALLOC) \
+ defined(SQLITE_MEMDEBUG)==0
# define SQLITE_SYSTEM_MALLOC 1
#endif
/*
** If SQLITE_MALLOC_SOFT_LIMIT is not zero, then try to keep the
** sizes of memory allocations below this value where possible.
*/
#if !defined(SQLITE_MALLOC_SOFT_LIMIT)
# define SQLITE_MALLOC_SOFT_LIMIT 1024
#endif
/*
** We need to define _XOPEN_SOURCE as follows in order to enable
** recursive mutexes on most Unix systems and fchmod() on OpenBSD.
** But _XOPEN_SOURCE define causes problems for Mac OS X, so omit
** it.
*/
#if !defined(_XOPEN_SOURCE) && !defined(__DARWIN__) && !defined(__APPLE__)
# define _XOPEN_SOURCE 600
#endif
/*
** NDEBUG and SQLITE_DEBUG are opposites. It should always be true that
** defined(NDEBUG)==!defined(SQLITE_DEBUG). If this is not currently true,
** make it true by defining or undefining NDEBUG.
**
** Setting NDEBUG makes the code smaller and faster by disabling the
** assert() statements in the code. So we want the default action
** to be for NDEBUG to be set and NDEBUG to be undefined only if SQLITE_DEBUG
** is set. Thus NDEBUG becomes an opt-in rather than an opt-out
** feature.
*/
#if !defined(NDEBUG) && !defined(SQLITE_DEBUG)
# define NDEBUG 1
#endif
#if defined(NDEBUG) && defined(SQLITE_DEBUG)
# undef NDEBUG
#endif
/*
** Enable SQLITE_ENABLE_EXPLAIN_COMMENTS if SQLITE_DEBUG is turned on.
*/
#if !defined(SQLITE_ENABLE_EXPLAIN_COMMENTS) && defined(SQLITE_DEBUG)
# define SQLITE_ENABLE_EXPLAIN_COMMENTS 1
#endif
/*
** The testcase() macro is used to aid in coverage testing. When
** doing coverage testing, the condition inside the argument to
** testcase() must be evaluated both true and false in order to
** get full branch coverage. The testcase() macro is inserted
** to help ensure adequate test coverage in places where simple
** condition/decision coverage is inadequate. For example, testcase()
** can be used to make sure boundary values are tested. For
** bitmask tests, testcase() can be used to make sure each bit
** is significant and used at least once. On switch statements
** where multiple cases go to the same block of code, testcase()
** can insure that all cases are evaluated.
**
*/
#ifdef SQLITE_COVERAGE_TEST
void sqlite3Coverage(int);
# define testcase(X) if( X ){ sqlite3Coverage(__LINE__); }
#else
# define testcase(X)
#endif
/*
** The TESTONLY macro is used to enclose variable declarations or
** other bits of code that are needed to support the arguments
** within testcase() and assert() macros.
*/
#if !defined(NDEBUG) || defined(SQLITE_COVERAGE_TEST)
# define TESTONLY(X) X
#else
# define TESTONLY(X)
#endif
/*
** Sometimes we need a small amount of code such as a variable initialization
** to setup for a later assert() statement. We do not want this code to
** appear when assert() is disabled. The following macro is therefore
** used to contain that setup code. The "VVA" acronym stands for
** "Verification, Validation, and Accreditation". In other words, the
** code within VVA_ONLY() will only run during verification processes.
*/
#ifndef NDEBUG
# define VVA_ONLY(X) X
#else
# define VVA_ONLY(X)
#endif
/*
** The ALWAYS and NEVER macros surround boolean expressions which
** are intended to always be true or false, respectively. Such
** expressions could be omitted from the code completely. But they
** are included in a few cases in order to enhance the resilience
** of SQLite to unexpected behavior - to make the code "self-healing"
** or "ductile" rather than being "brittle" and crashing at the first
** hint of unplanned behavior.
**
** In other words, ALWAYS and NEVER are added for defensive code.
**
** When doing coverage testing ALWAYS and NEVER are hard-coded to
** be true and false so that the unreachable code they specify will
** not be counted as untested code.
*/
#if defined(SQLITE_COVERAGE_TEST)
# define ALWAYS(X) (1)
# define NEVER(X) (0)
#elif !defined(NDEBUG)
# define ALWAYS(X) ((X)?1:(assert(0),0))
# define NEVER(X) ((X)?(assert(0),1):0)
#else
# define ALWAYS(X) (X)
# define NEVER(X) (X)
#endif
/*
** Return true (non-zero) if the input is a integer that is too large
** to fit in 32-bits. This macro is used inside of various testcase()
** macros to verify that we have tested SQLite for large-file support.
*/
#define IS_BIG_INT(X) (((X)&~(i64)0xffffffff)!=0)
/*
** The macro unlikely() is a hint that surrounds a boolean
** expression that is usually false. Macro likely() surrounds
** a boolean expression that is usually true. These hints could,
** in theory, be used by the compiler to generate better code, but
** currently they are just comments for human readers.
*/
#define likely(X) (X)
#define unlikely(X) (X)
#include "hash.h"
#include "parse.h"
#include
#include
#include
#include
#include
/*
** If compiling for a processor that lacks floating point support,
** substitute integer for floating-point
*/
#ifdef SQLITE_OMIT_FLOATING_POINT
# define double sqlite_int64
# define float sqlite_int64
# define LONGDOUBLE_TYPE sqlite_int64
# ifndef SQLITE_BIG_DBL
# define SQLITE_BIG_DBL (((sqlite3_int64)1)iSDParm.
**
** SRT_Except Remove results from the temporary index pDest->iSDParm.
**
** SRT_Exists Store a 1 in memory cell pDest->iSDParm if the result
** set is not empty.
**
** SRT_Discard Throw the results away. This is used by SELECT
** statements within triggers whose only purpose is
** the side-effects of functions.
**
** All of the above are free to ignore their ORDER BY clause. Those that
** follow must honor the ORDER BY clause.
**
** SRT_Output Generate a row of output (using the OP_ResultRow
** opcode) for each row in the result set.
**
** SRT_Mem Only valid if the result is a single column.
** Store the first column of the first result row
** in register pDest->iSDParm then abandon the rest
** of the query. This destination implies "LIMIT 1".
**
** SRT_Set The result must be a single column. Store each
** row of result as the key in table pDest->iSDParm.
** Apply the affinity pDest->affSdst before storing
** results. Used to implement "IN (SELECT ...)".
**
** SRT_EphemTab Create an temporary table pDest->iSDParm and store
** the result there. The cursor is left open after
** returning. This is like SRT_Table except that
** this destination uses OP_OpenEphemeral to create
** the table first.
**
** SRT_Coroutine Generate a co-routine that returns a new row of
** results each time it is invoked. The entry point
** of the co-routine is stored in register pDest->iSDParm
** and the result row is stored in pDest->nDest registers
** starting with pDest->iSdst.
**
** SRT_Table Store results in temporary table pDest->iSDParm.
** SRT_Fifo This is like SRT_EphemTab except that the table
** is assumed to already be open. SRT_Fifo has
** the additional property of being able to ignore
** the ORDER BY clause.
**
** SRT_DistFifo Store results in a temporary table pDest->iSDParm.
** But also use temporary table pDest->iSDParm+1 as
** a record of all prior results and ignore any duplicate
** rows. Name means: "Distinct Fifo".
**
** SRT_Queue Store results in priority queue pDest->iSDParm (really
** an index). Append a sequence number so that all entries
** are distinct.
**
** SRT_DistQueue Store results in priority queue pDest->iSDParm only if
** the same record has never been stored before. The
** index at pDest->iSDParm+1 hold all prior stores.
*/
#define SRT_Union 1 /* Store result as keys in an index */
#define SRT_Except 2 /* Remove result from a UNION index */
#define SRT_Exists 3 /* Store 1 if the result is not empty */
#define SRT_Discard 4 /* Do not save the results anywhere */
#define SRT_Fifo 5 /* Store result as data with an automatic rowid */
#define SRT_DistFifo 6 /* Like SRT_Fifo, but unique results only */
#define SRT_Queue 7 /* Store result in an queue */
#define SRT_DistQueue 8 /* Like SRT_Queue, but unique results only */
/* The ORDER BY clause is ignored for all of the above */
#define IgnorableOrderby(X) ((X->eDest)30
typedef unsigned char yDbMask[(SQLITE_MAX_ATTACHED+9)/8];
# define DbMaskTest(M,I) (((M)[(I)/8]&(1 If this is an INSERT INTO ... VALUES ... statement, then
* this stores values to be inserted. Otherwise NULL.
* pIdList -> If this is an INSERT INTO ... () VALUES ...
* statement, then this stores the column-names to be
* inserted into.
*
* (op == TK_DELETE)
* target -> A token holding the quoted name of the table to delete from.
* pWhere -> The WHERE clause of the DELETE statement if one is specified.
* Otherwise NULL.
*
* (op == TK_UPDATE)
* target -> A token holding the quoted name of the table to update rows of.
* pWhere -> The WHERE clause of the UPDATE statement if one is specified.
* Otherwise NULL.
* pExprList -> A list of the columns to update and the expressions to update
* them to. See sqlite3Update() documentation of "pChanges"
* argument.
*
*/
struct TriggerStep {
u8 op; /* One of TK_DELETE, TK_UPDATE, TK_INSERT, TK_SELECT */
u8 orconf; /* OE_Rollback etc. */
Trigger *pTrig; /* The trigger that this step is a part of */
Select *pSelect; /* SELECT statment or RHS of INSERT INTO .. SELECT ... */
Token target; /* Target table for DELETE, UPDATE, INSERT */
Expr *pWhere; /* The WHERE clause for DELETE or UPDATE steps */
ExprList *pExprList; /* SET clause for UPDATE. */
IdList *pIdList; /* Column names for INSERT */
TriggerStep *pNext; /* Next in the link-list */
TriggerStep *pLast; /* Last element in link-list. Valid for 1st elem only */
};
/*
** The following structure contains information used by the sqliteFix...
** routines as they walk the parse tree to make database references
** explicit.
*/
typedef struct DbFixer DbFixer;
struct DbFixer {
Parse *pParse; /* The parsing context. Error messages written here */
Schema *pSchema; /* Fix items to this schema */
int bVarOnly; /* Check for variable references only */
const char *zDb; /* Make sure all objects are contained in this database */
const char *zType; /* Type of the container - used for error messages */
const Token *pName; /* Name of the container - used for error messages */
};
/*
** An objected used to accumulate the text of a string where we
** do not necessarily know how big the string will be in the end.
*/
struct StrAccum {
sqlite3 *db; /* Optional database for lookaside. Can be NULL */
char *zBase; /* A base allocation. Not from malloc. */
char *zText; /* The string collected so far */
int nChar; /* Length of the string so far */
int nAlloc; /* Amount of space allocated in zText */
int mxAlloc; /* Maximum allowed string length */
u8 useMalloc; /* 0: none, 1: sqlite3DbMalloc, 2: sqlite3_malloc */
u8 accError; /* STRACCUM_NOMEM or STRACCUM_TOOBIG */
};
#define STRACCUM_NOMEM 1
#define STRACCUM_TOOBIG 2
/*
** A pointer to this structure is used to communicate information
** from sqlite3Init and OP_ParseSchema into the sqlite3InitCallback.
*/
typedef struct {
sqlite3 *db; /* The database being initialized */
char **pzErrMsg; /* Error message stored here */
int iDb; /* 0 for main database. 1 for TEMP, 2.. for ATTACHed */
int rc; /* Result code stored here */
} InitData;
/*
** Structure containing global configuration data for the SQLite library.
**
** This structure also contains some state information.
*/
struct Sqlite3Config {
int bMemstat; /* True to enable memory status */
int bCoreMutex; /* True to enable core mutexing */
int bFullMutex; /* True to enable full mutexing */
int bOpenUri; /* True to interpret filenames as URIs */
int bUseCis; /* Use covering indices for full-scans */
int mxStrlen; /* Maximum string length */
int neverCorrupt; /* Database is always well-formed */
int szLookaside; /* Default lookaside buffer size */
int nLookaside; /* Default lookaside buffer count */
sqlite3_mem_methods m; /* Low-level memory allocation interface */
sqlite3_mutex_methods mutex; /* Low-level mutex interface */
sqlite3_pcache_methods2 pcache2; /* Low-level page-cache interface */
void *pHeap; /* Heap storage space */
int nHeap; /* Size of pHeap[] */
int mnReq, mxReq; /* Min and max heap requests sizes */
sqlite3_int64 szMmap; /* mmap() space per open file */
sqlite3_int64 mxMmap; /* Maximum value for szMmap */
void *pScratch; /* Scratch memory */
int szScratch; /* Size of each scratch buffer */
int nScratch; /* Number of scratch buffers */
void *pPage; /* Page cache memory */
int szPage; /* Size of each page in pPage[] */
int nPage; /* Number of pages in pPage[] */
int mxParserStack; /* maximum depth of the parser stack */
int sharedCacheEnabled; /* true if shared-cache mode enabled */
/* The above might be initialized to non-zero. The following need to always
** initially be zero, however. */
int isInit; /* True after initialization has finished */
int inProgress; /* True while initialization in progress */
int isMutexInit; /* True after mutexes are initialized */
int isMallocInit; /* True after malloc is initialized */
int isPCacheInit; /* True after malloc is initialized */
int nRefInitMutex; /* Number of users of pInitMutex */
sqlite3_mutex *pInitMutex; /* Mutex used by sqlite3_initialize() */
void (*xLog)(void*,int,const char*); /* Function for logging */
void *pLogArg; /* First argument to xLog() */
#ifdef SQLITE_ENABLE_SQLLOG
void(*xSqllog)(void*,sqlite3*,const char*, int);
void *pSqllogArg;
#endif
#ifdef SQLITE_VDBE_COVERAGE
/* The following callback (if not NULL) is invoked on every VDBE branch
** operation. Set the callback using SQLITE_TESTCTRL_VDBE_COVERAGE.
*/
void (*xVdbeBranch)(void*,int iSrcLine,u8 eThis,u8 eMx); /* Callback */
void *pVdbeBranchArg; /* 1st argument */
#endif
#ifndef SQLITE_OMIT_BUILTIN_TEST
int (*xTestCallback)(int); /* Invoked by sqlite3FaultSim() */
#endif
int bLocaltimeFault; /* True to fail localtime() calls */
};
/*
** This macro is used inside of assert() statements to indicate that
** the assert is only valid on a well-formed database. Instead of:
**
** assert( X );
**
** One writes:
**
** assert( X || CORRUPT_DB );
**
** CORRUPT_DB is true during normal operation. CORRUPT_DB does not indicate
** that the database is definitely corrupt, only that it might be corrupt.
** For most test cases, CORRUPT_DB is set to false using a special
** sqlite3_test_control(). This enables assert() statements to prove
** things that are always true for well-formed databases.
*/
#define CORRUPT_DB (sqlite3Config.neverCorrupt==0)
/*
** Context pointer passed down through the tree-walk.
*/
struct Walker {
int (*xExprCallback)(Walker*, Expr*); /* Callback for expressions */
int (*xSelectCallback)(Walker*,Select*); /* Callback for SELECTs */
void (*xSelectCallback2)(Walker*,Select*);/* Second callback for SELECTs */
Parse *pParse; /* Parser context. */
int walkerDepth; /* Number of subqueries */
union { /* Extra data for callback */
NameContext *pNC; /* Naming context */
int i; /* Integer value */
SrcList *pSrcList; /* FROM clause */
struct SrcCount *pSrcCount; /* Counting column references */
} u;
};
/* Forward declarations */
int sqlite3WalkExpr(Walker*, Expr*);
int sqlite3WalkExprList(Walker*, ExprList*);
int sqlite3WalkSelect(Walker*, Select*);
int sqlite3WalkSelectExpr(Walker*, Select*);
int sqlite3WalkSelectFrom(Walker*, Select*);
/*
** Return code from the parse-tree walking primitives and their
** callbacks.
*/
#define WRC_Continue 0 /* Continue down into children */
#define WRC_Prune 1 /* Omit children but continue walking siblings */
#define WRC_Abort 2 /* Abandon the tree walk */
/*
** An instance of this structure represents a set of one or more CTEs
** (common table expressions) created by a single WITH clause.
*/
struct With {
int nCte; /* Number of CTEs in the WITH clause */
With *pOuter; /* Containing WITH clause, or NULL */
struct Cte { /* For each CTE in the WITH clause.... */
char *zName; /* Name of this CTE */
ExprList *pCols; /* List of explicit column names, or NULL */
Select *pSelect; /* The definition of this CTE */
const char *zErr; /* Error message for circular references */
} a[1];
};
/*
** Assuming zIn points to the first byte of a UTF-8 character,
** advance zIn to point to the first byte of the next UTF-8 character.
*/
#define SQLITE_SKIP_UTF8(zIn) { \
if( (*(zIn++))>=0xc0 ){ \
while( (*zIn & 0xc0)==0x80 ){ zIn++; } \
} \
}
/*
** The SQLITE_*_BKPT macros are substitutes for the error codes with
** the same name but without the _BKPT suffix. These macros invoke
** routines that report the line-number on which the error originated
** using sqlite3_log(). The routines also provide a convenient place
** to set a debugger breakpoint.
*/
int sqlite3CorruptError(int);
int sqlite3MisuseError(int);
int sqlite3CantopenError(int);
#define SQLITE_CORRUPT_BKPT sqlite3CorruptError(__LINE__)
#define SQLITE_MISUSE_BKPT sqlite3MisuseError(__LINE__)
#define SQLITE_CANTOPEN_BKPT sqlite3CantopenError(__LINE__)
/*
** FTS4 is really an extension for FTS3. It is enabled using the
** SQLITE_ENABLE_FTS3 macro. But to avoid confusion we also all
** the SQLITE_ENABLE_FTS4 macro to serve as an alisse for SQLITE_ENABLE_FTS3.
*/
#if defined(SQLITE_ENABLE_FTS4) && !defined(SQLITE_ENABLE_FTS3)
# define SQLITE_ENABLE_FTS3
#endif
/*
** The ctype.h header is needed for non-ASCII systems. It is also
** needed by FTS3 when FTS3 is included in the amalgamation.
*/
#if !defined(SQLITE_ASCII) || \
(defined(SQLITE_ENABLE_FTS3) && defined(SQLITE_AMALGAMATION))
# include
#endif
/*
** The following macros mimic the standard library functions toupper(),
** isspace(), isalnum(), isdigit() and isxdigit(), respectively. The
** sqlite versions only work for ASCII characters, regardless of locale.
*/
#ifdef SQLITE_ASCII
# define sqlite3Toupper(x) ((x)&~(sqlite3CtypeMap[(unsigned char)(x)]&0x20))
# define sqlite3Isspace(x) (sqlite3CtypeMap[(unsigned char)(x)]&0x01)
# define sqlite3Isalnum(x) (sqlite3CtypeMap[(unsigned char)(x)]&0x06)
# define sqlite3Isalpha(x) (sqlite3CtypeMap[(unsigned char)(x)]&0x02)
# define sqlite3Isdigit(x) (sqlite3CtypeMap[(unsigned char)(x)]&0x04)
# define sqlite3Isxdigit(x) (sqlite3CtypeMap[(unsigned char)(x)]&0x08)
# define sqlite3Tolower(x) (sqlite3UpperToLower[(unsigned char)(x)])
#else
# define sqlite3Toupper(x) toupper((unsigned char)(x))
# define sqlite3Isspace(x) isspace((unsigned char)(x))
# define sqlite3Isalnum(x) isalnum((unsigned char)(x))
# define sqlite3Isalpha(x) isalpha((unsigned char)(x))
# define sqlite3Isdigit(x) isdigit((unsigned char)(x))
# define sqlite3Isxdigit(x) isxdigit((unsigned char)(x))
# define sqlite3Tolower(x) tolower((unsigned char)(x))
#endif
/*
** Internal function prototypes
*/
#define sqlite3StrICmp sqlite3_stricmp
int sqlite3Strlen30(const char*);
#define sqlite3StrNICmp sqlite3_strnicmp
int sqlite3MallocInit(void);
void sqlite3MallocEnd(void);
void *sqlite3Malloc(int);
void *sqlite3MallocZero(int);
void *sqlite3DbMallocZero(sqlite3*, int);
void *sqlite3DbMallocRaw(sqlite3*, int);
char *sqlite3DbStrDup(sqlite3*,const char*);
char *sqlite3DbStrNDup(sqlite3*,const char*, int);
void *sqlite3Realloc(void*, int);
void *sqlite3DbReallocOrFree(sqlite3 *, void *, int);
void *sqlite3DbRealloc(sqlite3 *, void *, int);
void sqlite3DbFree(sqlite3*, void*);
int sqlite3MallocSize(void*);
int sqlite3DbMallocSize(sqlite3*, void*);
void *sqlite3ScratchMalloc(int);
void sqlite3ScratchFree(void*);
void *sqlite3PageMalloc(int);
void sqlite3PageFree(void*);
void sqlite3MemSetDefault(void);
void sqlite3BenignMallocHooks(void (*)(void), void (*)(void));
int sqlite3HeapNearlyFull(void);
/*
** On systems with ample stack space and that support alloca(), make
** use of alloca() to obtain space for large automatic objects. By default,
** obtain space from malloc().
**
** The alloca() routine never returns NULL. This will cause code paths
** that deal with sqlite3StackAlloc() failures to be unreachable.
*/
#ifdef SQLITE_USE_ALLOCA
# define sqlite3StackAllocRaw(D,N) alloca(N)
# define sqlite3StackAllocZero(D,N) memset(alloca(N), 0, N)
# define sqlite3StackFree(D,P)
#else
# define sqlite3StackAllocRaw(D,N) sqlite3DbMallocRaw(D,N)
# define sqlite3StackAllocZero(D,N) sqlite3DbMallocZero(D,N)
# define sqlite3StackFree(D,P) sqlite3DbFree(D,P)
#endif
#ifdef SQLITE_ENABLE_MEMSYS3
const sqlite3_mem_methods *sqlite3MemGetMemsys3(void);
#endif
#ifdef SQLITE_ENABLE_MEMSYS5
const sqlite3_mem_methods *sqlite3MemGetMemsys5(void);
#endif
#ifndef SQLITE_MUTEX_OMIT
sqlite3_mutex_methods const *sqlite3DefaultMutex(void);
sqlite3_mutex_methods const *sqlite3NoopMutex(void);
sqlite3_mutex *sqlite3MutexAlloc(int);
int sqlite3MutexInit(void);
int sqlite3MutexEnd(void);
#endif
int sqlite3StatusValue(int);
void sqlite3StatusAdd(int, int);
void sqlite3StatusSet(int, int);
#ifndef SQLITE_OMIT_FLOATING_POINT
int sqlite3IsNaN(double);
#else
# define sqlite3IsNaN(X) 0
#endif
/*
** An instance of the following structure holds information about SQL
** functions arguments that are the parameters to the printf() function.
*/
struct PrintfArguments {
int nArg; /* Total number of arguments */
int nUsed; /* Number of arguments used so far */
sqlite3_value **apArg; /* The argument values */
};
#define SQLITE_PRINTF_INTERNAL 0x01
#define SQLITE_PRINTF_SQLFUNC 0x02
void sqlite3VXPrintf(StrAccum*, u32, const char*, va_list);
void sqlite3XPrintf(StrAccum*, u32, const char*, ...);
char *sqlite3MPrintf(sqlite3*,const char*, ...);
char *sqlite3VMPrintf(sqlite3*,const char*, va_list);
char *sqlite3MAppendf(sqlite3*,char*,const char*,...);
#if defined(SQLITE_TEST) || defined(SQLITE_DEBUG)
void sqlite3DebugPrintf(const char*, ...);
#endif
#if defined(SQLITE_TEST)
void *sqlite3TestTextToPtr(const char*);
#endif
/* Output formatting for SQLITE_TESTCTRL_EXPLAIN */
#if defined(SQLITE_ENABLE_TREE_EXPLAIN)
void sqlite3ExplainBegin(Vdbe*);
void sqlite3ExplainPrintf(Vdbe*, const char*, ...);
void sqlite3ExplainNL(Vdbe*);
void sqlite3ExplainPush(Vdbe*);
void sqlite3ExplainPop(Vdbe*);
void sqlite3ExplainFinish(Vdbe*);
void sqlite3ExplainSelect(Vdbe*, Select*);
void sqlite3ExplainExpr(Vdbe*, Expr*);
void sqlite3ExplainExprList(Vdbe*, ExprList*);
const char *sqlite3VdbeExplanation(Vdbe*);
#else
# define sqlite3ExplainBegin(X)
# define sqlite3ExplainSelect(A,B)
# define sqlite3ExplainExpr(A,B)
# define sqlite3ExplainExprList(A,B)
# define sqlite3ExplainFinish(X)
# define sqlite3VdbeExplanation(X) 0
#endif
void sqlite3SetString(char **, sqlite3*, const char*, ...);
void sqlite3ErrorMsg(Parse*, const char*, ...);
int sqlite3Dequote(char*);
int sqlite3KeywordCode(const unsigned char*, int);
int sqlite3RunParser(Parse*, const char*, char **);
void sqlite3FinishCoding(Parse*);
int sqlite3GetTempReg(Parse*);
void sqlite3ReleaseTempReg(Parse*,int);
int sqlite3GetTempRange(Parse*,int);
void sqlite3ReleaseTempRange(Parse*,int,int);
void sqlite3ClearTempRegCache(Parse*);
Expr *sqlite3ExprAlloc(sqlite3*,int,const Token*,int);
Expr *sqlite3Expr(sqlite3*,int,const char*);
void sqlite3ExprAttachSubtrees(sqlite3*,Expr*,Expr*,Expr*);
Expr *sqlite3PExpr(Parse*, int, Expr*, Expr*, const Token*);
Expr *sqlite3ExprAnd(sqlite3*,Expr*, Expr*);
Expr *sqlite3ExprFunction(Parse*,ExprList*, Token*);
void sqlite3ExprAssignVarNumber(Parse*, Expr*);
void sqlite3ExprDelete(sqlite3*, Expr*);
ExprList *sqlite3ExprListAppend(Parse*,ExprList*,Expr*);
void sqlite3ExprListSetName(Parse*,ExprList*,Token*,int);
void sqlite3ExprListSetSpan(Parse*,ExprList*,ExprSpan*);
void sqlite3ExprListDelete(sqlite3*, ExprList*);
int sqlite3Init(sqlite3*, char**);
int sqlite3InitCallback(void*, int, char**, char**);
void sqlite3Pragma(Parse*,Token*,Token*,Token*,int);
void sqlite3ResetAllSchemasOfConnection(sqlite3*);
void sqlite3ResetOneSchema(sqlite3*,int);
void sqlite3CollapseDatabaseArray(sqlite3*);
void sqlite3BeginParse(Parse*,int);
void sqlite3CommitInternalChanges(sqlite3*);
Table *sqlite3ResultSetOfSelect(Parse*,Select*);
void sqlite3OpenMasterTable(Parse *, int);
Index *sqlite3PrimaryKeyIndex(Table*);
i16 sqlite3ColumnOfIndex(Index*, i16);
void sqlite3StartTable(Parse*,Token*,Token*,int,int,int,int);
void sqlite3AddColumn(Parse*,Token*);
void sqlite3AddNotNull(Parse*, int);
void sqlite3AddPrimaryKey(Parse*, ExprList*, int, int, int);
void sqlite3AddCheckConstraint(Parse*, Expr*);
void sqlite3AddColumnType(Parse*,Token*);
void sqlite3AddDefaultValue(Parse*,ExprSpan*);
void sqlite3AddCollateType(Parse*, Token*);
void sqlite3EndTable(Parse*,Token*,Token*,u8,Select*);
int sqlite3ParseUri(const char*,const char*,unsigned int*,
sqlite3_vfs**,char**,char **);
Btree *sqlite3DbNameToBtree(sqlite3*,const char*);
int sqlite3CodeOnce(Parse *);
#ifdef SQLITE_OMIT_BUILTIN_TEST
# define sqlite3FaultSim(X) SQLITE_OK
#else
int sqlite3FaultSim(int);
#endif
Bitvec *sqlite3BitvecCreate(u32);
int sqlite3BitvecTest(Bitvec*, u32);
int sqlite3BitvecSet(Bitvec*, u32);
void sqlite3BitvecClear(Bitvec*, u32, void*);
void sqlite3BitvecDestroy(Bitvec*);
u32 sqlite3BitvecSize(Bitvec*);
int sqlite3BitvecBuiltinTest(int,int*);
RowSet *sqlite3RowSetInit(sqlite3*, void*, unsigned int);
void sqlite3RowSetClear(RowSet*);
void sqlite3RowSetInsert(RowSet*, i64);
int sqlite3RowSetTest(RowSet*, int iBatch, i64);
int sqlite3RowSetNext(RowSet*, i64*);
void sqlite3CreateView(Parse*,Token*,Token*,Token*,Select*,int,int);
#if !defined(SQLITE_OMIT_VIEW) || !defined(SQLITE_OMIT_VIRTUALTABLE)
int sqlite3ViewGetColumnNames(Parse*,Table*);
#else
# define sqlite3ViewGetColumnNames(A,B) 0
#endif
#if SQLITE_MAX_ATTACHED>30
int sqlite3DbMaskAllZero(yDbMask);
#endif
void sqlite3DropTable(Parse*, SrcList*, int, int);
void sqlite3CodeDropTable(Parse*, Table*, int, int);
void sqlite3DeleteTable(sqlite3*, Table*);
#ifndef SQLITE_OMIT_AUTOINCREMENT
void sqlite3AutoincrementBegin(Parse *pParse);
void sqlite3AutoincrementEnd(Parse *pParse);
#else
# define sqlite3AutoincrementBegin(X)
# define sqlite3AutoincrementEnd(X)
#endif
void sqlite3Insert(Parse*, SrcList*, Select*, IdList*, int);
void *sqlite3ArrayAllocate(sqlite3*,void*,int,int*,int*);
IdList *sqlite3IdListAppend(sqlite3*, IdList*, Token*);
int sqlite3IdListIndex(IdList*,const char*);
SrcList *sqlite3SrcListEnlarge(sqlite3*, SrcList*, int, int);
SrcList *sqlite3SrcListAppend(sqlite3*, SrcList*, Token*, Token*);
SrcList *sqlite3SrcListAppendFromTerm(Parse*, SrcList*, Token*, Token*,
Token*, Select*, Expr*, IdList*);
void sqlite3SrcListIndexedBy(Parse *, SrcList *, Token *);
int sqlite3IndexedByLookup(Parse *, struct SrcList_item *);
void sqlite3SrcListShiftJoinType(SrcList*);
void sqlite3SrcListAssignCursors(Parse*, SrcList*);
void sqlite3IdListDelete(sqlite3*, IdList*);
void sqlite3SrcListDelete(sqlite3*, SrcList*);
Index *sqlite3AllocateIndexObject(sqlite3*,i16,int,char**);
Index *sqlite3CreateIndex(Parse*,Token*,Token*,SrcList*,ExprList*,int,Token*,
Expr*, int, int);
void sqlite3DropIndex(Parse*, SrcList*, int);
int sqlite3Select(Parse*, Select*, SelectDest*);
Select *sqlite3SelectNew(Parse*,ExprList*,SrcList*,Expr*,ExprList*,
Expr*,ExprList*,u16,Expr*,Expr*);
void sqlite3SelectDelete(sqlite3*, Select*);
Table *sqlite3SrcListLookup(Parse*, SrcList*);
int sqlite3IsReadOnly(Parse*, Table*, int);
void sqlite3OpenTable(Parse*, int iCur, int iDb, Table*, int);
#if defined(SQLITE_ENABLE_UPDATE_DELETE_LIMIT) && !defined(SQLITE_OMIT_SUBQUERY)
Expr *sqlite3LimitWhere(Parse*,SrcList*,Expr*,ExprList*,Expr*,Expr*,char*);
#endif
void sqlite3DeleteFrom(Parse*, SrcList*, Expr*);
void sqlite3Update(Parse*, SrcList*, ExprList*, Expr*, int);
WhereInfo *sqlite3WhereBegin(Parse*,SrcList*,Expr*,ExprList*,ExprList*,u16,int);
void sqlite3WhereEnd(WhereInfo*);
u64 sqlite3WhereOutputRowCount(WhereInfo*);
int sqlite3WhereIsDistinct(WhereInfo*);
int sqlite3WhereIsOrdered(WhereInfo*);
int sqlite3WhereIsSorted(WhereInfo*);
int sqlite3WhereContinueLabel(WhereInfo*);
int sqlite3WhereBreakLabel(WhereInfo*);
int sqlite3WhereOkOnePass(WhereInfo*, int*);
int sqlite3ExprCodeGetColumn(Parse*, Table*, int, int, int, u8);
void sqlite3ExprCodeGetColumnOfTable(Vdbe*, Table*, int, int, int);
void sqlite3ExprCodeMove(Parse*, int, int, int);
void sqlite3ExprCacheStore(Parse*, int, int, int);
void sqlite3ExprCachePush(Parse*);
void sqlite3ExprCachePop(Parse*);
void sqlite3ExprCacheRemove(Parse*, int, int);
void sqlite3ExprCacheClear(Parse*);
void sqlite3ExprCacheAffinityChange(Parse*, int, int);
void sqlite3ExprCode(Parse*, Expr*, int);
void sqlite3ExprCodeFactorable(Parse*, Expr*, int);
void sqlite3ExprCodeAtInit(Parse*, Expr*, int, u8);
int sqlite3ExprCodeTemp(Parse*, Expr*, int*);
int sqlite3ExprCodeTarget(Parse*, Expr*, int);
void sqlite3ExprCodeAndCache(Parse*, Expr*, int);
int sqlite3ExprCodeExprList(Parse*, ExprList*, int, u8);
#define SQLITE_ECEL_DUP 0x01 /* Deep, not shallow copies */
#define SQLITE_ECEL_FACTOR 0x02 /* Factor out constant terms */
void sqlite3ExprIfTrue(Parse*, Expr*, int, int);
void sqlite3ExprIfFalse(Parse*, Expr*, int, int);
Table *sqlite3FindTable(sqlite3*,const char*, const char*);
Table *sqlite3LocateTable(Parse*,int isView,const char*, const char*);
Table *sqlite3LocateTableItem(Parse*,int isView,struct SrcList_item *);
Index *sqlite3FindIndex(sqlite3*,const char*, const char*);
void sqlite3UnlinkAndDeleteTable(sqlite3*,int,const char*);
void sqlite3UnlinkAndDeleteIndex(sqlite3*,int,const char*);
void sqlite3Vacuum(Parse*);
int sqlite3RunVacuum(char**, sqlite3*);
char *sqlite3NameFromToken(sqlite3*, Token*);
int sqlite3ExprCompare(Expr*, Expr*, int);
int sqlite3ExprListCompare(ExprList*, ExprList*, int);
int sqlite3ExprImpliesExpr(Expr*, Expr*, int);
void sqlite3ExprAnalyzeAggregates(NameContext*, Expr*);
void sqlite3ExprAnalyzeAggList(NameContext*,ExprList*);
int sqlite3FunctionUsesThisSrc(Expr*, SrcList*);
Vdbe *sqlite3GetVdbe(Parse*);
void sqlite3PrngSaveState(void);
void sqlite3PrngRestoreState(void);
void sqlite3RollbackAll(sqlite3*,int);
void sqlite3CodeVerifySchema(Parse*, int);
void sqlite3CodeVerifyNamedSchema(Parse*, const char *zDb);
void sqlite3BeginTransaction(Parse*, int);
void sqlite3CommitTransaction(Parse*);
void sqlite3RollbackTransaction(Parse*);
void sqlite3Savepoint(Parse*, int, Token*);
void sqlite3CloseSavepoints(sqlite3 *);
void sqlite3LeaveMutexAndCloseZombie(sqlite3*);
int sqlite3ExprIsConstant(Expr*);
int sqlite3ExprIsConstantNotJoin(Expr*);
int sqlite3ExprIsConstantOrFunction(Expr*);
int sqlite3ExprIsInteger(Expr*, int*);
int sqlite3ExprCanBeNull(const Expr*);
int sqlite3ExprNeedsNoAffinityChange(const Expr*, char);
int sqlite3IsRowid(const char*);
void sqlite3GenerateRowDelete(Parse*,Table*,Trigger*,int,int,int,i16,u8,u8,u8);
void sqlite3GenerateRowIndexDelete(Parse*, Table*, int, int, int*);
int sqlite3GenerateIndexKey(Parse*, Index*, int, int, int, int*,Index*,int);
void sqlite3ResolvePartIdxLabel(Parse*,int);
void sqlite3GenerateConstraintChecks(Parse*,Table*,int*,int,int,int,int,
u8,u8,int,int*);
void sqlite3CompleteInsertion(Parse*,Table*,int,int,int,int*,int,int,int);
int sqlite3OpenTableAndIndices(Parse*, Table*, int, int, u8*, int*, int*);
void sqlite3BeginWriteOperation(Parse*, int, int);
void sqlite3MultiWrite(Parse*);
void sqlite3MayAbort(Parse*);
void sqlite3HaltConstraint(Parse*, int, int, char*, i8, u8);
void sqlite3UniqueConstraint(Parse*, int, Index*);
void sqlite3RowidConstraint(Parse*, int, Table*);
Expr *sqlite3ExprDup(sqlite3*,Expr*,int);
ExprList *sqlite3ExprListDup(sqlite3*,ExprList*,int);
SrcList *sqlite3SrcListDup(sqlite3*,SrcList*,int);
IdList *sqlite3IdListDup(sqlite3*,IdList*);
Select *sqlite3SelectDup(sqlite3*,Select*,int);
void sqlite3FuncDefInsert(FuncDefHash*, FuncDef*);
FuncDef *sqlite3FindFunction(sqlite3*,const char*,int,int,u8,u8);
void sqlite3RegisterBuiltinFunctions(sqlite3*);
void sqlite3RegisterDateTimeFunctions(void);
void sqlite3RegisterGlobalFunctions(void);
int sqlite3SafetyCheckOk(sqlite3*);
int sqlite3SafetyCheckSickOrOk(sqlite3*);
void sqlite3ChangeCookie(Parse*, int);
#if !defined(SQLITE_OMIT_VIEW) && !defined(SQLITE_OMIT_TRIGGER)
void sqlite3MaterializeView(Parse*, Table*, Expr*, int);
#endif
#ifndef SQLITE_OMIT_TRIGGER
void sqlite3BeginTrigger(Parse*, Token*,Token*,int,int,IdList*,SrcList*,
Expr*,int, int);
void sqlite3FinishTrigger(Parse*, TriggerStep*, Token*);
void sqlite3DropTrigger(Parse*, SrcList*, int);
void sqlite3DropTriggerPtr(Parse*, Trigger*);
Trigger *sqlite3TriggersExist(Parse *, Table*, int, ExprList*, int *pMask);
Trigger *sqlite3TriggerList(Parse *, Table *);
void sqlite3CodeRowTrigger(Parse*, Trigger *, int, ExprList*, int, Table *,
int, int, int);
void sqlite3CodeRowTriggerDirect(Parse *, Trigger *, Table *, int, int, int);
void sqliteViewTriggers(Parse*, Table*, Expr*, int, ExprList*);
void sqlite3DeleteTriggerStep(sqlite3*, TriggerStep*);
TriggerStep *sqlite3TriggerSelectStep(sqlite3*,Select*);
TriggerStep *sqlite3TriggerInsertStep(sqlite3*,Token*, IdList*,
Select*,u8);
TriggerStep *sqlite3TriggerUpdateStep(sqlite3*,Token*,ExprList*, Expr*, u8);
TriggerStep *sqlite3TriggerDeleteStep(sqlite3*,Token*, Expr*);
void sqlite3DeleteTrigger(sqlite3*, Trigger*);
void sqlite3UnlinkAndDeleteTrigger(sqlite3*,int,const char*);
u32 sqlite3TriggerColmask(Parse*,Trigger*,ExprList*,int,int,Table*,int);
# define sqlite3ParseToplevel(p) ((p)->pToplevel ? (p)->pToplevel : (p))
#else
# define sqlite3TriggersExist(B,C,D,E,F) 0
# define sqlite3DeleteTrigger(A,B)
# define sqlite3DropTriggerPtr(A,B)
# define sqlite3UnlinkAndDeleteTrigger(A,B,C)
# define sqlite3CodeRowTrigger(A,B,C,D,E,F,G,H,I)
# define sqlite3CodeRowTriggerDirect(A,B,C,D,E,F)
# define sqlite3TriggerList(X, Y) 0
# define sqlite3ParseToplevel(p) p
# define sqlite3TriggerColmask(A,B,C,D,E,F,G) 0
#endif
int sqlite3JoinType(Parse*, Token*, Token*, Token*);
void sqlite3CreateForeignKey(Parse*, ExprList*, Token*, ExprList*, int);
void sqlite3DeferForeignKey(Parse*, int);
#ifndef SQLITE_OMIT_AUTHORIZATION
void sqlite3AuthRead(Parse*,Expr*,Schema*,SrcList*);
int sqlite3AuthCheck(Parse*,int, const char*, const char*, const char*);
void sqlite3AuthContextPush(Parse*, AuthContext*, const char*);
void sqlite3AuthContextPop(AuthContext*);
int sqlite3AuthReadCol(Parse*, const char *, const char *, int);
#else
# define sqlite3AuthRead(a,b,c,d)
# define sqlite3AuthCheck(a,b,c,d,e) SQLITE_OK
# define sqlite3AuthContextPush(a,b,c)
# define sqlite3AuthContextPop(a) ((void)(a))
#endif
void sqlite3Attach(Parse*, Expr*, Expr*, Expr*);
void sqlite3Detach(Parse*, Expr*);
void sqlite3FixInit(DbFixer*, Parse*, int, const char*, const Token*);
int sqlite3FixSrcList(DbFixer*, SrcList*);
int sqlite3FixSelect(DbFixer*, Select*);
int sqlite3FixExpr(DbFixer*, Expr*);
int sqlite3FixExprList(DbFixer*, ExprList*);
int sqlite3FixTriggerStep(DbFixer*, TriggerStep*);
int sqlite3AtoF(const char *z, double*, int, u8);
int sqlite3GetInt32(const char *, int*);
int sqlite3Atoi(const char*);
int sqlite3Utf16ByteLen(const void *pData, int nChar);
int sqlite3Utf8CharLen(const char *pData, int nByte);
u32 sqlite3Utf8Read(const u8**);
LogEst sqlite3LogEst(u64);
LogEst sqlite3LogEstAdd(LogEst,LogEst);
#ifndef SQLITE_OMIT_VIRTUALTABLE
LogEst sqlite3LogEstFromDouble(double);
#endif
u64 sqlite3LogEstToInt(LogEst);
/*
** Routines to read and write variable-length integers. These used to
** be defined locally, but now we use the varint routines in the util.c
** file. Code should use the MACRO forms below, as the Varint32 versions
** are coded to assume the single byte case is already handled (which
** the MACRO form does).
*/
int sqlite3PutVarint(unsigned char*, u64);
int sqlite3PutVarint32(unsigned char*, u32);
u8 sqlite3GetVarint(const unsigned char *, u64 *);
u8 sqlite3GetVarint32(const unsigned char *, u32 *);
int sqlite3VarintLen(u64 v);
/*
** The header of a record consists of a sequence variable-length integers.
** These integers are almost always small and are encoded as a single byte.
** The following macros take advantage this fact to provide a fast encode
** and decode of the integers in a record header. It is faster for the common
** case where the integer is a single byte. It is a little slower when the
** integer is two or more bytes. But overall it is faster.
**
** The following expressions are equivalent:
**
** x = sqlite3GetVarint32( A, &B );
** x = sqlite3PutVarint32( A, B );
**
** x = getVarint32( A, B );
** x = putVarint32( A, B );
**
*/
#define getVarint32(A,B) \
(u8)((*(A)0 && (db)->aVTrans==0)
#endif
void sqlite3VtabMakeWritable(Parse*,Table*);
void sqlite3VtabBeginParse(Parse*, Token*, Token*, Token*, int);
void sqlite3VtabFinishParse(Parse*, Token*);
void sqlite3VtabArgInit(Parse*);
void sqlite3VtabArgExtend(Parse*, Token*);
int sqlite3VtabCallCreate(sqlite3*, int, const char *, char **);
int sqlite3VtabCallConnect(Parse*, Table*);
int sqlite3VtabCallDestroy(sqlite3*, int, const char *);
int sqlite3VtabBegin(sqlite3 *, VTable *);
FuncDef *sqlite3VtabOverloadFunction(sqlite3 *,FuncDef*, int nArg, Expr*);
void sqlite3InvalidFunction(sqlite3_context*,int,sqlite3_value**);
sqlite3_int64 sqlite3StmtCurrentTime(sqlite3_context*);
int sqlite3VdbeParameterIndex(Vdbe*, const char*, int);
int sqlite3TransferBindings(sqlite3_stmt *, sqlite3_stmt *);
void sqlite3ParserReset(Parse*);
int sqlite3Reprepare(Vdbe*);
void sqlite3ExprListCheckLength(Parse*, ExprList*, const char*);
CollSeq *sqlite3BinaryCompareCollSeq(Parse *, Expr *, Expr *);
int sqlite3TempInMemory(const sqlite3*);
const char *sqlite3JournalModename(int);
#ifndef SQLITE_OMIT_WAL
int sqlite3Checkpoint(sqlite3*, int, int, int*, int*);
int sqlite3WalDefaultHook(void*,sqlite3*,const char*,int);
#endif
#ifndef SQLITE_OMIT_CTE
With *sqlite3WithAdd(Parse*,With*,Token*,ExprList*,Select*);
void sqlite3WithDelete(sqlite3*,With*);
void sqlite3WithPush(Parse*, With*, u8);
#else
#define sqlite3WithPush(x,y,z)
#define sqlite3WithDelete(x,y)
#endif
/* Declarations for functions in fkey.c. All of these are replaced by
** no-op macros if OMIT_FOREIGN_KEY is defined. In this case no foreign
** key functionality is available. If OMIT_TRIGGER is defined but
** OMIT_FOREIGN_KEY is not, only some of the functions are no-oped. In
** this case foreign keys are parsed, but no other functionality is
** provided (enforcement of FK constraints requires the triggers sub-system).
*/
#if !defined(SQLITE_OMIT_FOREIGN_KEY) && !defined(SQLITE_OMIT_TRIGGER)
void sqlite3FkCheck(Parse*, Table*, int, int, int*, int);
void sqlite3FkDropTable(Parse*, SrcList *, Table*);
void sqlite3FkActions(Parse*, Table*, ExprList*, int, int*, int);
int sqlite3FkRequired(Parse*, Table*, int*, int);
u32 sqlite3FkOldmask(Parse*, Table*);
FKey *sqlite3FkReferences(Table *);
#else
#define sqlite3FkActions(a,b,c,d,e,f)
#define sqlite3FkCheck(a,b,c,d,e,f)
#define sqlite3FkDropTable(a,b,c)
#define sqlite3FkOldmask(a,b) 0
#define sqlite3FkRequired(a,b,c,d) 0
#endif
#ifndef SQLITE_OMIT_FOREIGN_KEY
void sqlite3FkDelete(sqlite3 *, Table*);
int sqlite3FkLocateIndex(Parse*,Table*,FKey*,Index**,int**);
#else
#define sqlite3FkDelete(a,b)
#define sqlite3FkLocateIndex(a,b,c,d,e)
#endif
/*
** Available fault injectors. Should be numbered beginning with 0.
*/
#define SQLITE_FAULTINJECTOR_MALLOC 0
#define SQLITE_FAULTINJECTOR_COUNT 1
/*
** The interface to the code in fault.c used for identifying "benign"
** malloc failures. This is only present if SQLITE_OMIT_BUILTIN_TEST
** is not defined.
*/
#ifndef SQLITE_OMIT_BUILTIN_TEST
void sqlite3BeginBenignMalloc(void);
void sqlite3EndBenignMalloc(void);
#else
#define sqlite3BeginBenignMalloc()
#define sqlite3EndBenignMalloc()
#endif
/*
** Allowed return values from sqlite3FindInIndex()
*/
#define IN_INDEX_ROWID 1 /* Search the rowid of the table */
#define IN_INDEX_EPH 2 /* Search an ephemeral b-tree */
#define IN_INDEX_INDEX_ASC 3 /* Existing index ASCENDING */
#define IN_INDEX_INDEX_DESC 4 /* Existing index DESCENDING */
#define IN_INDEX_NOOP 5 /* No table available. Use comparisons */
/*
** Allowed flags for the 3rd parameter to sqlite3FindInIndex().
*/
#define IN_INDEX_NOOP_OK 0x0001 /* OK to return IN_INDEX_NOOP */
#define IN_INDEX_MEMBERSHIP 0x0002 /* IN operator used for membership test */
#define IN_INDEX_LOOP 0x0004 /* IN operator used as a loop */
int sqlite3FindInIndex(Parse *, Expr *, u32, int*);
#ifdef SQLITE_ENABLE_ATOMIC_WRITE
int sqlite3JournalOpen(sqlite3_vfs *, const char *, sqlite3_file *, int, int);
int sqlite3JournalSize(sqlite3_vfs *);
int sqlite3JournalCreate(sqlite3_file *);
int sqlite3JournalExists(sqlite3_file *p);
#else
#define sqlite3JournalSize(pVfs) ((pVfs)->szOsFile)
#define sqlite3JournalExists(p) 1
#endif
void sqlite3MemJournalOpen(sqlite3_file *);
int sqlite3MemJournalSize(void);
int sqlite3IsMemJournal(sqlite3_file *);
#if SQLITE_MAX_EXPR_DEPTH>0
void sqlite3ExprSetHeight(Parse *pParse, Expr *p);
int sqlite3SelectExprHeight(Select *);
int sqlite3ExprCheckHeight(Parse*, int);
#else
#define sqlite3ExprSetHeight(x,y)
#define sqlite3SelectExprHeight(x) 0
#define sqlite3ExprCheckHeight(x,y)
#endif
u32 sqlite3Get4byte(const u8*);
void sqlite3Put4byte(u8*, u32);
#ifdef SQLITE_ENABLE_UNLOCK_NOTIFY
void sqlite3ConnectionBlocked(sqlite3 *, sqlite3 *);
void sqlite3ConnectionUnlocked(sqlite3 *db);
void sqlite3ConnectionClosed(sqlite3 *db);
#else
#define sqlite3ConnectionBlocked(x,y)
#define sqlite3ConnectionUnlocked(x)
#define sqlite3ConnectionClosed(x)
#endif
#ifdef SQLITE_DEBUG
void sqlite3ParserTrace(FILE*, char *);
#endif
/*
** If the SQLITE_ENABLE IOTRACE exists then the global variable
** sqlite3IoTrace is a pointer to a printf-like routine used to
** print I/O tracing messages.
*/
#ifdef SQLITE_ENABLE_IOTRACE
# define IOTRACE(A) if( sqlite3IoTrace ){ sqlite3IoTrace A; }
void sqlite3VdbeIOTraceSql(Vdbe*);
SQLITE_EXTERN void (*sqlite3IoTrace)(const char*,...);
#else
# define IOTRACE(A)
# define sqlite3VdbeIOTraceSql(X)
#endif
/*
** These routines are available for the mem2.c debugging memory allocator
** only. They are used to verify that different "types" of memory
** allocations are properly tracked by the system.
**
** sqlite3MemdebugSetType() sets the "type" of an allocation to one of
** the MEMTYPE_* macros defined below. The type must be a bitmask with
** a single bit set.
**
** sqlite3MemdebugHasType() returns true if any of the bits in its second
** argument match the type set by the previous sqlite3MemdebugSetType().
** sqlite3MemdebugHasType() is intended for use inside assert() statements.
**
** sqlite3MemdebugNoType() returns true if none of the bits in its second
** argument match the type set by the previous sqlite3MemdebugSetType().
**
** Perhaps the most important point is the difference between MEMTYPE_HEAP
** and MEMTYPE_LOOKASIDE. If an allocation is MEMTYPE_LOOKASIDE, that means
** it might have been allocated by lookaside, except the allocation was
** too large or lookaside was already full. It is important to verify
** that allocations that might have been satisfied by lookaside are not
** passed back to non-lookaside free() routines. Asserts such as the
** example above are placed on the non-lookaside free() routines to verify
** this constraint.
**
** All of this is no-op for a production build. It only comes into
** play when the SQLITE_MEMDEBUG compile-time option is used.
*/
#ifdef SQLITE_MEMDEBUG
void sqlite3MemdebugSetType(void*,u8);
int sqlite3MemdebugHasType(void*,u8);
int sqlite3MemdebugNoType(void*,u8);
#else
# define sqlite3MemdebugSetType(X,Y) /* no-op */
# define sqlite3MemdebugHasType(X,Y) 1
# define sqlite3MemdebugNoType(X,Y) 1
#endif
#define MEMTYPE_HEAP 0x01 /* General heap allocations */
#define MEMTYPE_LOOKASIDE 0x02 /* Might have been lookaside memory */
#define MEMTYPE_SCRATCH 0x04 /* Scratch allocations */
#define MEMTYPE_PCACHE 0x08 /* Page cache allocations */
#define MEMTYPE_DB 0x10 /* Uses sqlite3DbMalloc, not sqlite_malloc */
#endif /* _SQLITEINT_H_ */