Text window options

Docked graph options

Graph window options

}", " {{no}persist}", " {{no}raise}", " {{no}ctrl}", " {close}", "", " Multiple plot windows are supported: `set terminal wxt ` directs the", " output to plot window number n.", "", " The default window title is based on the window number. This title can also", " be specified with the keyword \"title\".", "", " Plot windows remain open even when the `gnuplot` driver is changed to a", " different device. A plot window can be closed by pressing the letter 'q'", " while that window has input focus, by choosing `close` from a window", " manager menu, or with `set term wxt close`.", "", " The size of the plot area is given in pixels, it defaults to 640x384.", " In addition to that, the actual size of the window also includes the space", " reserved for the toolbar and the status bar.", " When you resize a window, the plot is immediately scaled to fit in the", " new size of the window. Unlike other interactive terminals, the `wxt`", " terminal scales the whole plot, including fonts and linewidths, and keeps", " its global aspect ratio constant, leaving an empty space painted in gray.", " If you type `replot`, click the `replot` icon in the terminal toolbar or", " type a new `plot` command, the new plot will completely fit in the window", " and the font size and the linewidths will be reset to their defaults.", "", " The position option can be used to set the position of the plot window.", " The position option only applies to the first plot after the `set term`", " command.", "", " The active plot window (the one selected by `set term wxt `) is", " interactive. Its behaviour is shared with other terminal types. See `mouse`", " for details. It also has some extra icons, which are supposed to be", " self-explanatory.", "", " This terminal supports an enhanced text mode, which allows font and other", " formatting commands (subscripts, superscripts, etc.) to be embedded in labels", " and other text strings. The enhanced text mode syntax is shared with other", " gnuplot terminal types. See `enhanced` for more details.", "", " is in the format \"FontFace,FontSize\", i.e. the face and the size", " comma-separated in a single string. FontFace is a usual font face name, such", " as \'Arial\'. If you do not provide FontFace, the wxt terminal will use", " \'Sans\'. FontSize is the font size, in points. If you do not provide it,", " the wxt terminal will use a size of 10 points.", " For example :", " set term wxt font \"Arial,12\"", " set term wxt font \"Arial\" # to change the font face only", " set term wxt font \",12\" # to change the font size only", " set term wxt font \"\" # to reset the font name and size", "", " The fonts are retrieved from the usual fonts subsystems. Under Windows,", " those fonts are to be found and configured in the entry \"Fonts\" of the", " control panel. Under UNIX, they are handled by \"fontconfig\".", "", " Pango, the library used to layout the text, is based on utf-8. Thus, the wxt", " terminal has to convert from your encoding to utf-8. The default input", " encoding is based on your \'locale\'. If you want to use another encoding,", " make sure gnuplot knows which one you are using. See `encoding` for more", " details.", "", " Pango may give unexpected results with fonts that do not respect the unicode", " mapping. With the Symbol font, for example, the wxt terminal will use the map", " provided by http://www.unicode.org/ to translate character codes to unicode.", " Pango will do its best to find a font containing this character, looking for", " your Symbol font, or other fonts with a broad unicode coverage, like the", " DejaVu fonts. Note that \"the Symbol font\" is to be understood as the Adobe", " Symbol font, distributed with Acrobat Reader as \"SY______.PFB\".", " Alternatively, the OpenSymbol font, distributed with OpenOffice.org as", " \"opens___.ttf\", offers the same characters. Microsoft has distributed a", " Symbol font (\"symbol.ttf\"), but it has a different character set with", " several missing or moved mathematic characters. If you experience problems", " with your default setup (if the demo enhancedtext.dem is not displayed", " properly for example), you probably have to install one of the Adobe or", " OpenOffice Symbol fonts, and remove the Microsoft one.", " Other non-conform fonts, such as \"wingdings\" have been observed working.", "", " The rendering of the plot can be altered with a dialog available from the", " toolbar. To obtain the best output possible, the rendering involves three", " mechanisms : antialiasing, oversampling and hinting.", " Antialiasing allows to display non-horizontal and non-vertical lines", " smoother.", " Oversampling combined with antialiasing provides subpixel accuracy,", " so that gnuplot can draw a line from non-integer coordinates. This avoids", " wobbling effects on diagonal lines ('plot x' for example).", " Hinting avoids the blur on horizontal and vertical lines caused by", " oversampling. The terminal will snap these lines to integer coordinates so", " that a one-pixel-wide line will actually be drawn on one and only one pixel.", "", " By default, the window is raised to the top of your desktop when a plot is", " drawn. This can be controlled with the keyword \"raise\".", " The keyword \"persist\" will prevent gnuplot from exiting before you", " explicitly close all the plot windows.", " Finally, by default the key raises the gnuplot console window, and", " 'q' closes the plot window. The keyword \"ctrl\" allows you to replace those", " bindings by + and +'q', respectively.", " These three keywords (raise, persist and ctrl) can also be set and remembered", " between sessions through the configuration dialog." #else /* JAPANESE_DOC */ "1 wxt", "?set terminal wxt", "?terminal wxt", "?set term wxt", "?term wxt", "?wxt", " `wxt` ", " wxWidgets ( `wxt` )", " 2D cairo /", " pango ", "", " :", " set term wxt {}", " {size ,} {position ,}", " {background | nobackground}", " {{no}enhanced}", " {font } {fontscale }", " {title \"title\"}", " {linewidth } {butt|rounded|square}", " {dashlength

}", " {{no}persist}", " {{no}raise}", " {{no}ctrl}", " {close}", "", " `set terminal wxt ` ", " n ", "", " ", " \"title\" ", "", " `gnuplot` ", " ", " 'q' `close` ", " `set term wxt close` ", "", " 640x384 ", " ", " ", " ", " `wxt`", " ", " `replot`", " `replot` ", " `plot` ", " ", " ", "", " position ", " `set term` ", "", " (`set term wxt ` ) ", " : `mouse`", " ", " ", "", " (enhanced text mode) ", " () ", " gnuplot ", " : `enhanced`", "", " \"FontFace,FontSize\" FontFace FontSize ", " FontFace \'Arial\' ", " FontFace wxt ", " \'Sans\' FontSize ", " FontSize wxt 10 ", " :", " set term wxt font \"Arial,12\"", " set term wxt font \"Arial\" # ", " set term wxt font \",12\" # ", " set term wxt font \"\" # ", "", " MS-Windows ", " \"Fonts\" ", " Unix \"fontconfig\" ", "", " pango utf-8 ", " wxt utf-8 ", " \'locale\' ", " gnuplot ", " : `encoding`", "", " pango unicode ", " Symbol wxt ", " unicode http://www.unicode.org/ ", " pango ", " Symbol DejaVu ", " unicode ", " \"the Symbol font\" Acrobat Reader ", " \"SY______.PFB\" Adobe Symbol ", " OpenOffice.org ", " \"opens___.ttf\" OpenSymbol ", " Microsoft Symbol (\"symbol.ttf\") ", " ", " ", " ( enhancedtext.dem ", " ) Adobe OpenOffice Symbol ", " Microsoft Symbol ", " ", " \"windings\" ", " ", "", " ", " ", " 3 ", " ", " ", " gnuplot ", " ( 'plot x') ", " ", " ", " 1 1 (1 ", " ) ", "", " ", " () \"raise\" ", " \"persist\" ", " gnuplot ", " gnuplot ", " 'q' \"ctrl\" ", " + +'q' ", " 3 (raise, persist, ctrl) ", " " #endif /* JAPANESE_DOC */ END_HELP(wxt) START_HELP(x11) #ifndef JAPANESE_DOC "1 x11", "?commands set terminal x11", "?set terminal x11", "?set term x11", "?terminal x11", "?term x11", "?x11", "?X11", "", " Syntax:", " set terminal x11 { | window \"\"}", " {title \"\"}", " {{no}enhanced} {font }", " {linewidth LW}", " {{no}persist} {{no}raise} {{no}ctrlq}", " {{no}replotonresize}", " {close}", " {size XX,YY} {position XX,YY}", " set terminal x11 {reset}", "", " Multiple plot windows are supported: `set terminal x11 ` directs the", " output to plot window number n. If n is not 0, the terminal number will be", " appended to the window title (unless a title has been supplied manually)", " and the icon will be labeled `Gnuplot `. The active window may be", " distinguished by a change in cursor (from default to crosshair).", "", " The `x11` terminal can connect to X windows previously created by an outside", " application via the option `window` followed by a string containing the", " X ID for the window in hexadecimal format. Gnuplot uses that external X", " window as a container since X does not allow for multiple clients selecting", " the ButtonPress event. In this way, gnuplot's mouse features work within", " the contained plot window.", "", " set term x11 window \"220001e\"", "", " The x11 terminal supports enhanced text mode (see `enhanced`), subject", " to the available fonts. In order for font size commands embedded in text", " to have any effect, the default x11 font must be scalable. Thus the first", " example below will work as expected, but the second will not.", "", " set term x11 enhanced font \"arial,15\" ", " set title '{/=20 Big} Medium {/=5 Small}' ", "", " set term x11 enhanced font \"terminal-14\" ", " set title '{/=20 Big} Medium {/=5 Small}' ", "", " Plot windows remain open even when the `gnuplot` driver is changed to a", " different device. A plot window can be closed by pressing the letter q", " while that window has input focus, or by choosing `close` from a window", " manager menu. All plot windows can be closed by specifying `reset`, which", " actually terminates the subprocess which maintains the windows (unless", " `-persist` was specified). The `close` command can be used to close", " individual plot windows by number. However, after a `reset`, those plot", " windows left due to persist cannot be closed with the command `close`.", " A `close` without a number closes the current active plot window.", "", " The gnuplot outboard driver, gnuplot_x11, is searched in a default place", " chosen when the program is compiled. You can override that by defining", " the environment variable GNUPLOT_DRIVER_DIR to point to a different", " location.", "", " Plot windows will automatically be closed at the end of the session", " unless the `-persist` option was given.", "", " The options `persist` and `raise` are unset by default, which means that", " the defaults (persist == no and raise == yes) or the command line options", " -persist / -raise or the Xresources are taken. If [no]persist or", " [no]raise are specified, they will override command line options and", " Xresources. Setting one of these options takes place immediately, so", " the behaviour of an already running driver can be modified. If the window", " does not get raised, see discussion in `raise`.", "", " The option `replotonresize` (active by default) replots the data when the", " plot window is resized. Without this option, the even-aspect-ratio scaling", " may result in the plot filling only part of the window after resizing.", " With this option, gnuplot does a full replot on each resize event, resulting", " in better space utilization. This option is generally desirable, unless the", " potentially CPU-intensive replotting during resizing is a concern. Replots", " can be manually initiated with hotkey 'e' or the 'replot' command.", "", " The option `title \"\"` will supply the title name of the window", " for the current plot window or plot window if a number is given.", " Where (or if) this title is shown depends on your X window manager.", "", " The size option can be used to set the size of the plot window. The", " size option will only apply to newly created windows.", "", " The position option can be used to set the position of the plot window. The", " position option will only apply to newly created windows.", "", " The size or aspect ratio of a plot may be changed by resizing the `gnuplot`", " window.", "", " Linewidths and pointsizes may be changed from within `gnuplot` with", " `set linestyle`.", "", " For terminal type `x11`, `gnuplot` accepts (when initialized) the standard", " X Toolkit options and resources such as geometry, font, and name from the", " command line arguments or a configuration file. See the X(1) man page", " (or its equivalent) for a description of such options.", "", "=X resources", " A number of other `gnuplot` options are available for the `x11` terminal.", " These may be specified either as command-line options when `gnuplot` is", " invoked or as resources in the configuration file \".Xdefaults\". They are", " set upon initialization and cannot be altered during a `gnuplot` session.", " (except `persist` and `raise`)", "2 x11_fonts", "?commands set terminal x11 x11_fonts", "?set terminal x11 x11_fonts", "?set term x11 x11_fonts", "?x11 x11_fonts", "?x11_fonts", "=fonts", " Upon initial startup, the default font is taken from the X11 resources", " as set in the system or user .Xdefaults file or on the command line.", "", " Example:", " gnuplot*font: lucidasans-bold-12", " A new default font may be specified to the x11 driver from inside", " gnuplot using", " `set term x11 font \"\"`", " The driver first queries the X-server for a font of the exact name given.", " If this query fails, then it tries to interpret as", " \",,,\" and to construct a full X11 font name", " of the form", " -*----*-*--*-*-*-*-*-", "", " is the base name of the font (e.g. Times or Symbol)", " is the point size (defaults to 12 if not specified)", " is 'i' if ==\"italic\" 'o' if ==\"oblique\" 'r' otherwise", " is 'medium' or 'bold' if explicitly requested, otherwise '*'", " is set based on the current character set.", " So `set term x11 font \"arial,15,italic\"` will be translated to", " -*-arial-*-i-*-*-15-*-*-*-*-*-iso8859-1 (assuming default encoding).", " The , , and specifications are all optional.", " If you do not specify or then you will get whatever font ", " variant the font server offers first.", " You may set a default encoding via the corresponding X11 resource. E.g.", " gnuplot*encoding: iso8859-15", " The driver also recognizes some common PostScript font names and", " replaces them with possible X11 or TrueType equivalents.", " This same sequence is used to process font requests from `set label`.", "", " If your gnuplot was built with configuration option --enable-x11-mbfonts,", " you can specify multi-byte fonts by using the prefix \"mbfont:\" on the font", " name. An additional font may be given, separated by a semicolon.", " Since multi-byte font encodings are interpreted according to the locale", " setting, you must make sure that the environmental variable LC_CTYPE is set", " to some appropriate locale value such as ja_JP.eucJP, ko_KR.EUC, or zh_CN.EUC.", "", " Example:", " set term x11 font 'mbfont:kana14;k14'", " # 'kana14' and 'k14' are Japanese X11 font aliases, and ';'", " # is the separator of font names.", " set term x11 font 'mbfont:fixed,16,r,medium'", " # ,,, form is also usable.", " set title '(mb strings)' font 'mbfont:*-fixed-medium-r-normal--14-*'", "", " The same syntax applies to the default font in Xresources settings,", " for example,", " gnuplot*font: \\", " mbfont:-misc-fixed-medium-r-normal--14-*-*-*-c-*-jisx0208.1983-0", "", " If gnuplot is built with --enable-x11-mbfonts, you can use two special", " PostScript font names 'Ryumin-Light-*' and 'GothicBBB-Medium-*' (standard", " Japanese PS fonts) without the prefix \"mbfont:\".", "", "2 command-line_options", "?commands set terminal x11 command-line-options", "?set terminal x11 command-line-options", "?set term x11 command-line-options", "?x11 command-line-options", " In addition to the X Toolkit options, the following options may be specified", " on the command line when starting `gnuplot` or as resources in your", " \".Xdefaults\" file (note that `raise` and `persist` can be overridden", " later by `set term x11 [no]raise [no]persist)`:", "@start table - first is interactive cleartext form", " `-mono` forces monochrome rendering on color displays.", " `-gray` requests grayscale rendering on grayscale or color displays.", " (Grayscale displays receive monochrome rendering by default.)", " `-clear` requests that the window be cleared momentarily before a", " new plot is displayed.", " `-tvtwm` requests that geometry specifications for position of the", " window be made relative to the currently displayed portion", " of the virtual root.", " `-raise` raises plot window after each plot", " `-noraise` does not raise plot window after each plot", #ifdef USE_MOUSE " `-ctrlq ` closes window on ctrl-q rather than q", #endif " `-persist` plot windows survive after main gnuplot program exits", "#\\begin{tabular}{|cl|} \\hline", "#`-mono` & forces monochrome rendering on color displays.\\\\", "#`-gray` & requests grayscale rendering on grayscale or color displays.\\\\", "# & (Grayscale displays receive monochrome rendering by default.) \\\\", "#`-clear` & requests that the window be cleared momentarily before a\\\\", "# & new plot is displayed. \\\\", "#`-tvtwm` & requests that geometry specifications for position of the\\\\", "# & window be made relative to the currently displayed portion\\\\", "# & of the virtual root. \\\\", "#`-raise` & raises plot window after each plot. \\\\", "#`-noraise` & does not raise plot window after each plot. \\\\", "#`-persist` & plot windows survive after main gnuplot program exits. \\\\", "%c l .", "%`-mono`@forces monochrome rendering on color displays.", "%`-gray`@requests grayscale rendering on grayscale or color displays.", "% @(Grayscale displays receive monochrome rendering by default.)", "%`-clear`@requests that the window be cleared momentarily before a", "% @new plot is displayed.", "%`-tvtwm`@requests that geometry specifications for position of the", "% @window be made relative to the currently displayed portion", "% @of the virtual root.", "%`-raise`@raises plot window after each plot", "%`-noraise`@does not raise plot window after each plot", #ifdef USE_MOUSE "%`-novevents`@does not process mouse and key events", "%`-ctrlq`@closes window on ctrl-q rather than q", #endif "%`-persist`@plot windows survive after main gnuplot program exits", "@end table", "=X resources", " The options are shown above in their command-line syntax. When entered as", " resources in \".Xdefaults\", they require a different syntax.", "", " Example:", " gnuplot*gray: on", " gnuplot*ctrlq: on", "", " `gnuplot` also provides a command line option (`-pointsize `) and a", " resource, `gnuplot*pointsize: `, to control the size of points plotted", " with the `points` plotting style. The value `v` is a real number (greater", " than 0 and less than or equal to ten) used as a scaling factor for point", " sizes. For example, `-pointsize 2` uses points twice the default size, and", " `-pointsize 0.5` uses points half the normal size.", "", " The `-ctrlq` switch changes the hot-key that closes a plot window from `q`", " to `q`. This is useful is you are using the keystroke-capture feature", " `pause mouse keystroke`, since it allows the character `q` to be captured", " just as all other alphanumeric characters. The `-ctrlq` switch similarly", " replaces the hot-key with for the same reason.", "", "2 color_resources", "?set terminal x11 color_resources", "?set term x11 color_resources", "?x11 color_resources", "=X resources", " NB: THIS SECTION IS LARGELY IRRELEVANT IN GNUPLOT VERSION 5", " The X11 terminal honors the following resources (shown here with their", " default values) or the greyscale resources. The values may be color names", " as listed in the X11 rgb.txt file on your system, hexadecimal RGB color", " specifications (see X11 documentation), or a color name followed by a comma", " and an `intensity` value from 0 to 1. For example, `blue, 0.5` means a half", " intensity blue.", "@start table - first is interactive cleartext form", " gnuplot*background: white", " gnuplot*textColor: black", " gnuplot*borderColor: black", " gnuplot*axisColor: black", " gnuplot*line1Color: red", " gnuplot*line2Color: green", " gnuplot*line3Color: blue", " gnuplot*line4Color: magenta", " gnuplot*line5Color: cyan", " gnuplot*line6Color: sienna", " gnuplot*line7Color: orange", " gnuplot*line8Color: coral", "#\\begin{tabular}{|cl|} \\hline", "#&gnuplot*background: white\\\\", "#&gnuplot*textColor: black\\\\", "#&gnuplot*borderColor: black\\\\", "#&gnuplot*axisColor: black\\\\", "#&gnuplot*line1Color: red\\\\", "#&gnuplot*line2Color: green\\\\", "#&gnuplot*line3Color: blue\\\\", "#&gnuplot*line4Color: magenta\\\\", "#&gnuplot*line5Color: cyan\\\\", "#&gnuplot*line6Color: sienna\\\\", "#&gnuplot*line7Color: orange\\\\", "#&gnuplot*line8Color: coral\\\\", "%c l .", "%@gnuplot*background: white", "%@gnuplot*textColor: black", "%@gnuplot*borderColor: black", "%@gnuplot*axisColor: black", "%@gnuplot*line1Color: red", "%@gnuplot*line2Color: green", "%@gnuplot*line3Color: blue", "%@gnuplot*line4Color: magenta", "%@gnuplot*line5Color: cyan", "%@gnuplot*line6Color: sienna", "%@gnuplot*line7Color: orange", "%@gnuplot*line8Color: coral", "@end table", "", " The command-line syntax for these is simple only for background,", " which maps directly to the usual X11 toolkit option \"-bg\". All", " others can only be set on the command line by use of the generic", " \"-xrm\" resource override option", "", " Examples:", "", " gnuplot -background coral", " to change the background color.", "", " gnuplot -xrm 'gnuplot*line1Color:blue'", " to override the first linetype color.", "", "2 grayscale_resources", "?commands set terminal x11 grayscale_resources", "?set terminal x11 grayscale_resources", "?set term x11 grayscale_resources", "?x11 grayscale_resources", "?grayscale_resources", "=X resources", " When `-gray` is selected, `gnuplot` honors the following resources for", " grayscale or color displays (shown here with their default values). Note", " that the default background is black.", "@start table - first is interactive cleartext form", " gnuplot*background: black", " gnuplot*textGray: white", " gnuplot*borderGray: gray50", " gnuplot*axisGray: gray50", " gnuplot*line1Gray: gray100", " gnuplot*line2Gray: gray60", " gnuplot*line3Gray: gray80", " gnuplot*line4Gray: gray40", " gnuplot*line5Gray: gray90", " gnuplot*line6Gray: gray50", " gnuplot*line7Gray: gray70", " gnuplot*line8Gray: gray30", "#\\begin{tabular}{|cl|} \\hline", "#&gnuplot*background: black\\\\", "#&gnuplot*textGray: white\\\\", "#&gnuplot*borderGray: gray50\\\\", "#&gnuplot*axisGray: gray50\\\\", "#&gnuplot*line1Gray: gray100\\\\", "#&gnuplot*line2Gray: gray60\\\\", "#&gnuplot*line3Gray: gray80\\\\", "#&gnuplot*line4Gray: gray40\\\\", "#&gnuplot*line5Gray: gray90\\\\", "#&gnuplot*line6Gray: gray50\\\\", "#&gnuplot*line7Gray: gray70\\\\", "#&gnuplot*line8Gray: gray30\\\\", "%c l .", "%@gnuplot*background: black", "%@gnuplot*textGray: white", "%@gnuplot*borderGray: gray50", "%@gnuplot*axisGray: gray50", "%@gnuplot*line1Gray: gray100", "%@gnuplot*line2Gray: gray60", "%@gnuplot*line3Gray: gray80", "%@gnuplot*line4Gray: gray40", "%@gnuplot*line5Gray: gray90", "%@gnuplot*line6Gray: gray50", "%@gnuplot*line7Gray: gray70", "%@gnuplot*line8Gray: gray30", "@end table", "", "2 line_resources", "?set terminal x11 line_resources", "?set term x11 line_resources", "?x11 line_resources", "=X resources", " NB: THIS SECTION IS LARGELY IRRELEVANT IN GNUPLOT VERSION 5", " `gnuplot` honors the following resources for setting the width (in pixels) of", " plot lines (shown here with their default values.) 0 or 1 means a minimal", " width line of 1 pixel width. A value of 2 or 3 may improve the appearance of", " some plots.", "@start table - first is interactive cleartext form", " gnuplot*borderWidth: 1", " gnuplot*axisWidth: 0", " gnuplot*line1Width: 0", " gnuplot*line2Width: 0", " gnuplot*line3Width: 0", " gnuplot*line4Width: 0", " gnuplot*line5Width: 0", " gnuplot*line6Width: 0", " gnuplot*line7Width: 0", " gnuplot*line8Width: 0", "#\\begin{tabular}{|cl|} \\hline", "#&gnuplot*borderWidth: 1\\\\", "#&gnuplot*axisWidth: 0\\\\", "#&gnuplot*line1Width: 0\\\\", "#&gnuplot*line2Width: 0\\\\", "#&gnuplot*line3Width: 0\\\\", "#&gnuplot*line4Width: 0\\\\", "#&gnuplot*line5Width: 0\\\\", "#&gnuplot*line6Width: 0\\\\", "#&gnuplot*line7Width: 0\\\\", "#&gnuplot*line8Width: 0\\\\", "%c l .", "%@gnuplot*borderWidth: 1", "%@gnuplot*axisWidth: 0", "%@gnuplot*line1Width: 0", "%@gnuplot*line2Width: 0", "%@gnuplot*line3Width: 0", "%@gnuplot*line4Width: 0", "%@gnuplot*line5Width: 0", "%@gnuplot*line6Width: 0", "%@gnuplot*line7Width: 0", "%@gnuplot*line8Width: 0", "@end table", "", " `gnuplot` honors the following resources for setting the dash style used for", " plotting lines. 0 means a solid line. A two-digit number `jk` (`j` and `k`", " are >= 1 and 12bit, gnuplot starts with a maximal number", " of 0x200 colors. On a visual class with a depth > 8bit (but

---

Web Proxy Viewer  |  New URL  |  Original Page