GREEN = '\033[92m'

RED = '\033[91m'

YELLOW = '\033[93m'

CYAN = '\033[96m'

probe_conf = {}

conf_avail = False

config_init = {

'name': "Python MiniProbe",

'gid': str(uuid.uuid4()),

'server': "",

'port': "443",

'baseinterval': "60",

'key': "",

'cleanmem': "",

'announced': "0",

'protocol': "1",

'debug': "",

'subprocs': "10"

}

path = './miniprobe/probe.conf'

def run(self):

conf_avail = False

if not os.getuid() == 0:

print(Bcolor.RED + "You must run me as root user!" + Bcolor.END)

print(Bcolor.RED + "Rerun me with sudo " + __file__ + Bcolor.END)

sys.exit(2)

_install.do_egg_install(self)

print("")

print(Bcolor.CYAN + "Welcome to the Miniprobe (Python) for PRTG installer" + Bcolor.END)

if self.file_check(self.path):

print("")

probe_config_exists = "%s" % str(raw_input(Bcolor.YELLOW + "A config file was already found. "

"Do you want to reconfigure [y/N]: "

+ Bcolor.END)).rstrip().lstrip()

if probe_config_exists.lower() == "y":

config_old = self.read_config(self.path)

self.get_config(config_old)

else:

print("")

uninstall = "%s" % str(raw_input(Bcolor.YELLOW + "Do you want to Uninstall or Restart the "

"service [u/R]: " + Bcolor.END)).rstrip().lstrip()

if uninstall.lower() == "u":

self.remove_config()

conf_avail = False

else:

conf_avail = True

else:

conf_avail = self.get_config(self.config_init)

if conf_avail:

print(subprocess.call("update-rc.d prtgprobe defaults", shell=True))

print(Bcolor.GREEN + "Starting Mini Probe" + Bcolor.END)

print(subprocess.call("/etc/init.d/prtgprobe start", shell=True))

print(Bcolor.GREEN + "Done. You now can start/stop the Mini Probe using '/etc/init.d/prtgprobe start' "

"or '/etc/init.d/prtgprobe stop'" + Bcolor.END)

else:

print("Exiting!")

sys.exit()

pass

def file_check(self, check_path):

# Check if a give file exists

return os.path.exists(check_path)

def file_create(self, create_path):

# Creates a given file and writes some startup information to it

with open(create_path, 'w') as file_create:

file_create.write("###Mini Probe Config File\n")

file_create.close()

def write_config(self, config):

conf = ""

with open(self.path, 'a') as config_file:

for key in config:

conf += "%s:%s\n" % (key, config[key])

config_file.write(conf)

config_file.close()

print(Bcolor.GREEN + "Config file successfully written!" + Bcolor.END)

def write_file(self, write_path, content):

with open(write_path, 'w') as file_write:

file_write.write(content)

file_write.close()

def logrotation(self, rotation_path):

rotate_tpl = open("./miniprobe/scripts/rotate.tpl")

return rotate_tpl.read() % rotation_path

def read_config(self, path):

"""

config = {}

try:

conf_file = open(path)

for line in conf_file:

if not (line == '\n'):

if not (line.startswith('#')):

config[line.split(':')[0]] = line.split(':')[1].rstrip()

conf_file.close()

return config

except Exception as read_error:

print(Bcolor.RED + "No config found! Error Message: %s Exiting!" + Bcolor.END % read_error)

sys.exit()

def init_script(self, script_path, user):

init_script_tpl = open("./miniprobe/scripts/probe.tpl")

return init_script_tpl.read() % (script_path, user)

def write_load_list(self, ds18b20_sensors, other_sensors):

default_sensors = "Ping,HTTP,Port,SNMPCustom,CPULoad,Memory,Diskspace,SNMPTraffic,CPUTemp,Probehealth,ExternalIP,ADNS,APT,NMAP,MDADM"

if not (other_sensors == ""):

default_sensors = default_sensors + "," + other_sensors

file_sensor_init = open("./miniprobe/sensors/__init__.py", "a")

file_sensor_init.write("# Copyright (c) 2014, Paessler AG <support@paessler.com>\n")

file_sensor_init.write("# All rights reserved.\n")

file_sensor_init.write("# Redistribution and use in source and binary forms, with or without modification,"

" are permitted provided that the\n")

file_sensor_init.write("# following conditions are met:\n")

file_sensor_init.write("# 1. Redistributions of source code must retain the above copyright notice, "

"this list of conditions\n")

file_sensor_init.write("# and the following disclaimer.\n")

file_sensor_init.write("# 2. Redistributions in binary form must reproduce the above copyright notice, "

"this list of conditions\n")

file_sensor_init.write("# and the following disclaimer in the documentation and/or other materials provided "

"with the distribution.\n")

file_sensor_init.write("# 3. Neither the name of the copyright holder nor the names of its contributors may be"

" used to endorse\n")

file_sensor_init.write("# or promote products derived from this software without specific prior written "

"permission.\n")

file_sensor_init.write("\n")

file_sensor_init.write("# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS \"AS IS\" "

"AND ANY EXPRESS OR IMPLIED WARRANTIES,\n")

file_sensor_init.write("# INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND "

"FITNESS FOR\n")

file_sensor_init.write("# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR "

"CONTRIBUTORS BE LIABLE FOR ANY DIRECT,\n")

file_sensor_init.write("# INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES "

"(INCLUDING, BUT NOT LIMITED TO,\n")

file_sensor_init.write("# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; "

"OR BUSINESS INTERRUPTION)\n")

file_sensor_init.write("# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, "

"STRICT LIABILITY,\n")

file_sensor_init.write("# OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF "

"THE USE OF THIS SOFTWARE,\n")

file_sensor_init.write("# EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.\n")

file_sensor_init.write("\n")

file_sensor_init.write("# Announce modules available in this package\n")

file_sensor_init.write("# Just extend this list for your modules and they will be automatically imported "

"during runtime and\n")

file_sensor_init.write("# are announced to the PRTG Core\n")

file_sensor_init.write("__all__ = " + str(default_sensors.split(",")) + "\n")

print("__all__ = " + str(default_sensors.split(",")) + "\n")

if not (ds18b20_sensors == ""):

file_sensor_init.write("DS18B20_sensors = " + str(ds18b20_sensors.split(",")) + "\n")

file_sensor_init.close()

def install_w1_module(self):

print(Bcolor.YELLOW + "Checking the hardware for Raspberry Pi." + Bcolor.END)

if os.uname()[4][:3] == 'arm':

print(Bcolor.GREEN + "Found hardware matching " + os.uname()[4][:3] + Bcolor.END)

tmp_use_raspberry = "%s" % str(raw_input(Bcolor.GREEN + "Do you want to enable the Raspberry Pi "

"temperature sensor [y/N]: "

+ Bcolor.END)).rstrip().lstrip()

if tmp_use_raspberry.lower() == "y":

try:

self.install_kernel_module()

return True

except Exception as e:

print("%s.Please install the same" % e)

print("Exiting")

sys.exit(1)

else:

return False

else:

print(Bcolor.RED + "Found hardware matching " + os.uname()[4][:3] + Bcolor.END)

return False

def install_kernel_module(self):

print(Bcolor.GREEN + "Checking for w1-gpio line in /boot/config.txt" + Bcolor.END)

found = False

file_boot_config = open('/boot/config.txt', 'r')

for line in file_boot_config.readlines():

if line.strip() == 'dtoverlay=w1-gpio':

print(Bcolor.GREEN + "Found dtoverlay line. Skipping install of w1-gpio" + Bcolor.END)

found = True

file_boot_config.close()

if not found:

print(Bcolor.GREEN + "Line not found. Now adding the dtoverlay line to /boot/config.txt" + Bcolor.END)

file_boot_config = open('/boot/config.txt', 'a')

file_boot_config.write('\n#w1-gpio added by PRTG MiniProbe install script\n')

file_boot_config.write('dtoverlay=w1-gpio')

file_boot_config.close()

print(Bcolor.GREEN + "Please restart the installscript after the Raspberry Pi has been rebooted!"

+ Bcolor.END)

print(Bcolor.GREEN + "Now rebooting..." + Bcolor.END)

print(subprocess.call("reboot", shell=True))

sys.exit(2)

def get_w1_sensors(self):

sensors = ""

print(Bcolor.GREEN + "Finding all W1 sensors" + Bcolor.END)

w1_file = open('/sys/devices/w1_bus_master1/w1_master_slaves', 'r')

for line in w1_file.readlines():

print(Bcolor.GREEN + "Found: " + Bcolor.YELLOW + line[3:].strip() + Bcolor.END)

sensors = sensors + "," + line[3:].strip()

w1_file.close()

sens = "%s" % str(raw_input(Bcolor.GREEN + "Please enter the id's of the temperature sensors you want to use "

"from the list above, separated with a , [" + sensors[1:] + "]: "

+ Bcolor.END)).rstrip().lstrip()

if not sens == "":

return sens

else:

return sensors[1:]

def get_config_user(self, default="root"):

tmp_user = "%s" % str(raw_input(Bcolor.GREEN + "Please provide the username the script should run under ["

+ default + "]: " + Bcolor.END)).rstrip().lstrip()

if not tmp_user == "":

return tmp_user

else:

return default

def get_config_name(self, default):

tmp_name = "%s" % str(raw_input(Bcolor.GREEN + "Please provide the desired name of your Mini Probe ["

+ default + "]: " + Bcolor.END)).rstrip().lstrip()

if not tmp_name == "":

return tmp_name

else:

return default

def get_config_gid(self, default):

tmp_gid = "%s" % str(raw_input(Bcolor.GREEN + "Please provide the Probe GID [" + default + "]: "

+ Bcolor.END)).rstrip().lstrip()

if not tmp_gid == "":

return tmp_gid

else:

return default

def get_config_ip(self, default=None):

tmp_ip = "%s" % str(raw_input(Bcolor.GREEN + "Please provide the IP/DNS name of the PRTG Core Server ["

+ default + "]: " + Bcolor.END)).rstrip().lstrip()

if not (tmp_ip == "") or not (default == ""):

if (tmp_ip == "") and not (default == ""):

tmp_ip = default

response = os.system("ping -c 1 " + tmp_ip + " > /dev/null")

if not response == 0:

print(Bcolor.YELLOW + "PRTG Server can not be reached. Please make sure the server is reachable."

+ Bcolor.END)

go_on = "%s" % str(raw_input(Bcolor.YELLOW + "Do you still want to continue using this server [y/N]: "

+ Bcolor.END)).rstrip().lstrip()

if not go_on.lower() == "y":

return self.get_config_ip()

else:

print(Bcolor.GREEN + "PRTG Server can be reached. Continuing..." + Bcolor.END)

return tmp_ip

else:

print(Bcolor.YELLOW + "You have not provided an IP/DNS name of the PRTG Core Server." + Bcolor.END)

return self.get_config_ip()

def get_config_port(self, default):

tmp_port = "%s" % str(raw_input(Bcolor.GREEN + "Please provide the port the PRTG web server is listening to "

"(IMPORTANT: Only SSL is supported)[" + default + "]: "

+ Bcolor.END)).rstrip().lstrip()

if not tmp_port == "":

return tmp_port

else:

return default

def get_config_base_interval(self, default):

tmp_interval = "%s" % str(raw_input(Bcolor.GREEN + "Please provide the base interval for your sensors ["

+ default + "]: " + Bcolor.END)).rstrip().lstrip()

if not tmp_interval == "":

return tmp_interval

else:

return default

def get_config_access_key(self, default):

tmp_accesskey = "%s" % str(raw_input(Bcolor.GREEN + "Please provide the Probe Access Key as defined on the "

"PRTG Core [" + default + "]: "

+ Bcolor.END)).rstrip().lstrip()

if (tmp_accesskey == "") and not (default == ""):

tmp_accesskey = default

else:

if tmp_accesskey == "":

print(Bcolor.YELLOW + "You have not provided the Probe Access Key as defined on the PRTG Core."

+ Bcolor.END)

return self.get_config_access_key(default)

else:

return tmp_accesskey

def get_config_path(self, default=os.path.dirname(os.path.abspath(__file__))):

default += "/miniprobe"

tmp_path = "%s" % str(raw_input(Bcolor.GREEN + "Please provide the path where the probe files are located ["

+ default + "]: " + Bcolor.END)).rstrip().lstrip()

if not tmp_path == "":

return tmp_path

else:

return default

def get_config_clean_memory(self, default=None):

tmp_cleanmem = "%s" % str(raw_input(Bcolor.GREEN + "Do you want the mini probe flushing buffered and cached "

"memory [y/N]: " + Bcolor.END)).rstrip().lstrip()

if tmp_cleanmem.lower() == "y":

return "True"

else:

return "False"

def get_config_subprocs(self, default="10"):

tmp_subprocs = "%s" % str(raw_input(Bcolor.GREEN + "How much subprocesses should be spawned for scanning ["

+ default + "]: " + Bcolor.END)).rstrip().lstrip()

if not tmp_subprocs == "":

return tmp_subprocs

else:

return default

# For future use

def get_config_announced(self, default):

return default

# For future use

def get_config_protocol(self, default):

return default

def get_config_debug(self, default):

tmp_debug = "%s" % str(raw_input(Bcolor.GREEN + "Do you want to enable debug logging (" + Bcolor.YELLOW +

"can create massive logfiles!" + Bcolor.GREEN + ") [y/N]: "

+ Bcolor.END)).rstrip().lstrip()

if tmp_debug.lower() == "y":

tmp_debug1 = "%s" % str(raw_input(Bcolor.YELLOW + "Are you sure you want to enable debug logging? "

"This will create massive logfiles [y/N]: "

+ Bcolor.END)).rstrip().lstrip()

if tmp_debug1.lower() == "y":

return "True"

else:

return "False"

else:

return "False"

def get_config(self, config_old):

print("")

print(Bcolor.YELLOW + "Checking for necessary modules and Python Version" + Bcolor.END)

try:

import hashlib

import string

import json

import socket

import importlib

import requests

import pyasn1

import pysnmp

except Exception as e:

print("%s.Please install the same" % e)

print("Exiting")

sys.exit(1)

print(Bcolor.GREEN + "Successfully imported modules." + Bcolor.END)

print("")

if self.install_w1_module():

sensors = self.get_w1_sensors()

if not sensors == "":

print(Bcolor.GREEN + "Adding DS18B20.py and selected sensors to /miniprobe/sensors/__init__.py"

+ Bcolor.END)

self.write_load_list(sensors, "DS18B20")

else:

self.write_load_list("", "")

else:

self.write_load_list("", "")

print("")

try:

probe_user = self.get_config_user()

self.probe_conf['name'] = self.get_config_name(config_old['name'])

self.probe_conf['gid'] = self.get_config_gid(config_old['gid'])

self.probe_conf['server'] = self.get_config_ip(config_old['server'])

self.probe_conf['port'] = self.get_config_port(config_old['port'])

self.probe_conf['baseinterval'] = self.get_config_base_interval(config_old['baseinterval'])

self.probe_conf['key'] = self.get_config_access_key(config_old['key'])

probe_path = self.get_config_path()

self.probe_conf['cleanmem'] = self.get_config_clean_memory(config_old['cleanmem'])

self.probe_conf['announced'] = self.get_config_announced(config_old['announced'])

self.probe_conf['protocol'] = self.get_config_protocol(config_old['protocol'])

self.probe_conf['debug'] = self.get_config_debug(config_old['debug'])

self.probe_conf['subprocs'] = self.get_config_subprocs(config_old['subprocs'])

print("")

print(self.path)

self.file_create(self.path)

self.write_config(self.probe_conf)

logpath = "%s/logs" % probe_path

if not (self.file_check(logpath)):

os.makedirs(logpath)

path_rotate = "/etc/logrotate.d/prtgprobe"

path_init = "/etc/init.d/prtgprobe"

print(Bcolor.GREEN + "Creating Logrotation Config" + Bcolor.END)

self.write_file(path_rotate, self.logrotation(probe_path))

print(Bcolor.GREEN + "Setting up runlevel" + Bcolor.END)

self.write_file(path_init, self.init_script(probe_path, probe_user))

print(Bcolor.GREEN + "Changing File Permissions" + Bcolor.END)

os.chmod('%s/probe.py' % probe_path, 0o0755)

os.chmod(path_init, 0o0755)

return True

except Exception as e:

print(Bcolor.RED + "%s. Exiting!" % e + Bcolor.END)

return False

def remove_config(self):

try:

print(subprocess.call("/etc/init.d/prtgprobe stop", shell=True))

os.remove('/etc/init.d/prtgprobe')

os.remove('/etc/logrotate.d/prtgprobe')

os.remove('./miniprobe/probe.conf')

except Exception as e:

print("%s. Exiting!" % e)