Provides an easy way for working with devices. Contains common infrastructure for CLIs - mainly AppBuilder and NativeScript.

Latest version: 0.22.0

Release date: 2016, December 15

Before installing the mobile-cli-lib, verify that your system meets the following requirements.

Minimum Software Requirements

• Windows 7 or later
• .NET 4.0 or later
• Node.js
  • (Windows 7 systems): Node.js 0.10.26 or a later stable official release except 0.10.34
    A known issue prevents the mobile-cli-lib from working properly with Node.js 0.10.34.
  • (Windows 8 and later systems): Node.js 0.12.0 or a later stable official release
    A known issue in Inquirer.js prevents the interactive prompts from working properly in cmd shells on Windows 8 or later systems with Node.js 0.10.x.

Additional Software Requirements for iOS On-Device Deployment

• iTunes (latest official)
• Node.js

The bitness of Node.js and iTunes must match.

Additional Software Requirements for Android On-Device Deployment

• Device drivers required by your system to recognize the connected Android device
• For testing in the native emulators
  • JDK 8 or later
  • Android SDK 19 or later
  • (Optional) Genymotion

Additional Software Requirements for Windows Phone On-Device Deployment

In this version of the mobile-cli-lib, you cannot deploy and LiveSync to connected Windows Phone devices from the command line.

Minimum Software Requirements

• OS X Mavericks
• Node.js 0.10.26 or a later stable official release except 0.10.34
  A known issue prevents the mobile-cli-lib from working properly with Node.js 0.10.34.
• Mono 3.12 or later

Additional Software Requirements for iOS On-Device Deployment

• iTunes (latest official)
• For testing in the native emulator
  • Xcode

Additional Software Requirements for Android On-Device Deployment

• Device drivers required by your system to recognize the connected Android device
• For testing in the native emulators
  • JDK 8 or later
  • Android SDK 19 or later
  • (Optional) Genymotion

Additional Software Requirements for Windows Phone On-Device Deployment

In this version of the mobile-cli-lib, you cannot deploy and LiveSync to connected Windows Phone devices from the command line.

Minimum Software Requirements

• Ubuntu 14.04 LTS
  The mobile-cli-lib is tested and verified to run on Ubuntu 14.04 LTS. You might be able to run the mobile-cli-lib on other Linux distributions.

• Node.js 0.10.26 or a later stable official release except 0.10.34
  A known issue prevents the mobile-cli-lib from working properly with Node.js 0.10.34.

  TIP: You can follow the instructions provided here to install Node.js on your system.

• An Internet browser (latest official release)

• (64-bit systems) The runtime libraries for the ia32/i386 architecture

  • In the terminal, run the following command.

    sudo apt-get install lib32z1 lib32ncurses5 lib32bz2-1.0 libstdc++6:i386
    

Additional Software Requirements for iOS On-Device Deployment

In this version of the mobile-cli-lib, you cannot deploy and LiveSync on connected iOS devices from the command line. You need to manually deploy the application package using iTunes.

Additional Software Requirements for Android On-Device Deployment

• Device drivers required by your system to recognize the connected Android device
• G++ compiler
  • In the terminal, run sudo apt-get install g++
• For testing in the native emulators
  • JDK 8 or later
  • Android SDK 19 or later
  • (Optional) Genymotion

Additional Software Requirements for Windows Phone On-Device Deployment

In this version of the mobile-cli-lib, you cannot deploy and LiveSync to connected Windows Phone devices from the command line.

The mobile-cli-lib should be added as dependency in your project's package.json.

In order to use mobile-cli-lib, just add a reference to it in your package.json:

dependencies: {
	"mobile-cli-lib": "0.4.0"
}

After that execute npm install in the directory, where your package.json is located. This command will install all your dependencies in node_modules directory. Now you are ready to use mobile-cli-lib in your project:

var common = require("mobile-cli-lib");
common.fs.getFileSize("D:\\Work\\t.txt")
    .then(function (result) {
        console.log("File size is: " + result);
        return result;
    }, function (err) {
        console.log("Error happened:");
        console.log(err);
    });

You can find a sample application here. Just download the zip file and execute npm install in the project directory. After that you can execute node index.js in your terminal. In case you have file D:\Work\t.txt, the application will show you its size. In case you do not have such file, the application will show an error. You can change the filename in index.js.

This section contains information about each public method.

Device related public API, exposes IDeviceInfo data, that contains the following information:

/**
 * Describes available information for a device.
 */
interface IDeviceInfo {
	/**
	 * Unique identifier of the device.
	 */
	identifier: string;

	/**
	 * The name of the device.
	 * For Android this is the value of device's 'ro.product.name' property.
	 * For iOS this is the value of device's 'DeviceName' property.
	 */
	displayName: string;

	/**
	 * Device model.
	 * For Android this is the value of device's 'ro.product.model' property.
	 * For iOS this is the value of device's 'ProductType' property.
	 */
	model: string;

	/**
	 * Version of the OS.
	 * For Android this is the value of device's 'ro.build.version.release' property.
	 * For iOS this is the value of device's 'ProductVersion' property.
	 */
	version: string;

	/**
	 * Vendor of the device.
	 * For Android this is the value of device's 'ro.product.brand' property.
	 * For iOS the value is always "Apple".
	 */
	vendor: string;

	/**
	 * Device's platform.
	 * Can be Android or iOS.
	 */
	platform: string;

	/**
	 * Status of device describing if you can work with this device or there's communication error.
	 * Can be Connected or Unreachable.
	 */
	status: string;

	/**
	 * Additional information for errors that prevents working with this device.
	 * It will be null when status is Connected.
	 */
	errorHelp: string;

	/**
	 * Defines if the device is tablet or not.
	 * For Android the value will be true when device's 'ro.build.characteristics' property contains "tablet" word or when the 'ro.build.version.release' is 3.x
	 * For iOS the value will be true when device's 'ProductType' property contains "ipad" word.
	 */
	isTablet: boolean;

	/**
	 * Optional property describing the color of the device.
	 * Available for iOS only - the value of device's 'DeviceColor' property.
	 */
	color?: string;

	/**
	 *  Optional property describing the architecture of the device
	 *  Available for iOS only - can be "armv7" or "arm64"
	 */
	activeArchitecture?: string;
}

Stability 2 - Stable

companionAppsService gives access to companion apps identifiers.

• getAllCompanionAppIdentifiers: returns all companion app identifiers in a JSON object, where the top level keys are frameworks (cordova and nativescript) and inner keys are platforms (android, ios, wp8). Sample usage:

var companionAppIdentifiers = require("mobile-cli-lib").companionAppsService.getAllCompanionAppIdentifiers();

Result object is something like:

{
	'cordova': {
		'android': 'android.cordova.companion.app.identifier',
		'ios': 'ios.cordova.companion.app.identifier',
		'wp8': 'wp8.cordova.companion.app.identifier'
	},
	'nativescript': {
		'android': 'android.nativescript.companion.app.identifier',
		'ios': 'ios.nativescript.companion.app.identifier',
		'wp8': null
	}
}

• getCompanionAppIdentifier(framework: string, platform: string): string - returns companion app identifier for specified framework and platform. Sample usage:

var companionAppIdentifiers = require("mobile-cli-lib").companionAppsService.getCompanionAppIdentifier("cordova", "android");

Stability 2 - Stable

deviceEmitter module is used to emit different events related to devices attached to the system. You can use deviceEmitter to add handles for the following events:

• deviceFound - Raised when a new device is attached to the system. The callback function will receive one argument - deviceInfoData. Sample usage:

require("mobile-cli-lib").deviceEmitter.on("deviceFound",  function(deviceInfoData) {
	console.log("Found device with identifier: " + deviceInfoData.identifier);
});

• deviceLost - Raised when a device is detached from the system. The callback function will receive one argument - deviceInfoData. Sample usage:

require("mobile-cli-lib").deviceEmitter.on("deviceLost",  function(deviceInfoData) {
	console.log("Detached device with identifier: " + deviceInfoData.identifier);
});

• deviceLogData - Raised when attached device reports any information. This is the output of adb logcat for Android devices. For iOS this is the iOS SysLog. The event is raised for any device that reports data. The callback function has two arguments - deviceIdentifier and reportedData.
  
  Sample usage:

require("mobile-cli-lib").deviceEmitter.on("deviceLogData",  function(identifier, reportedData) {
	console.log("Device " + identifier + " reports: " + reportedData);
});

• applicationInstalled - Raised when application is installed on a device. The callback has two arguments - deviceIdentifier and applicationIdentifier.
  
  Sample usage:

require("mobile-cli-lib").deviceEmitter.on("applicationInstalled",  function(identifier, applicationIdentifier) {
	console.log("Application " + applicationIdentifier  + " has been installed on device with id: " + identifier);
});

• applicationUninstalled - Raised when application is removed from device. The callback has two arguments - deviceIdentifier and applicationIdentifier.
  
  Sample usage:

require("mobile-cli-lib").deviceEmitter.on("applicationUninstalled",  function(identifier, applicationIdentifier) {
	console.log("Application " + applicationIdentifier  + " has been uninstalled from device with id: " + identifier);
});

• debuggableAppFound - Raised when application on a device becomes available for debugging. The callback has one argument - applicationInfo.
  
  Sample usage:

require("mobile-cli-lib").deviceEmitter.on("debuggableAppFound",  function(applicationInfo) {
	console.log("Application " + applicationInfo.appIdentifier  + " is available for debugging on device with id: " + applicationInfo.deviceIdentifier);
});

Sample result for applicationInfo will be:

{
	"deviceIdentifier": "4df18f307d8a8f1b",
	"appIdentifier": "com.telerik.Fitness",
	"framework": "NativeScript",
	"title": "NativeScript Application"
}

• debuggableAppLost - Raised when application on a device is not available for debugging anymore. The callback has one argument - applicationInfo.
  
  Sample usage:

require("mobile-cli-lib").deviceEmitter.on("debuggableAppLost",  function(applicationInfo) {
	console.log("Application " + applicationInfo.appIdentifier  + " is not available for debugging anymore on device with id: " + applicationInfo.deviceIdentifier);
});

Sample result for applicationInfo will be:

{
	"deviceIdentifier": "4df18f307d8a8f1b",
	"appIdentifier": "com.telerik.Fitness",
	"framework": "NativeScript",
	"title": "NativeScript Application"
}

• debuggableViewFound - Raised when a new debuggable WebView is found. The callback has three arguments - deviceIdentifier, appIdentifier and webViewInfo.

Sample usage:

require("mobile-cli-lib")
	.deviceEmitter.on("debuggableViewFound",  function(deviceIdentifier, appIdentifier, debuggableViewInfo) {
	console.log("On device " + deviceIdentifier + " the application " + appIdentifier  + " now has new WebView: " + debuggableViewInfo);
});

Sample result for debuggableViewInfo will be:

{
	"description": "",
	"devtoolsFrontendUrl": "http://chrome-devtools-frontend.appspot.com/serve_rev/@211d45a5b74b06d12bb016f3c4d54095faf2646f/inspector.html?ws=127.0.0.1:53213/devtools/page/4050",
	"id": "4050",
	"title": "New tab",
	"type": "page",
	"url": "chrome-native://newtab/",
	"webSocketDebuggerUrl": "ws://127.0.0.1:53213/devtools/page/4050"
}

• debuggableViewLost - Raised when a debuggable WebView is lost. The callback has three arguments - deviceIdentifier, appIdentifier and webViewInfo.

Sample usage:

require("mobile-cli-lib")
	.deviceEmitter.on("debuggableViewLost",  function(deviceIdentifier, appIdentifier, debuggableViewInfo) {
	console.log("On device " + deviceIdentifier + " the application " + appIdentifier  + " now cannot debug WebView: " + debuggableViewInfo);
});

Sample result for debuggableViewInfo will be:

{
	"description": "",
	"devtoolsFrontendUrl": "http://chrome-devtools-frontend.appspot.com/serve_rev/@211d45a5b74b06d12bb016f3c4d54095faf2646f/inspector.html?ws=127.0.0.1:53213/devtools/page/4050",
	"id": "4050",
	"title": "New tab",
	"type": "page",
	"url": "chrome-native://newtab/",
	"webSocketDebuggerUrl": "ws://127.0.0.1:53213/devtools/page/4050"
}

• debuggableViewChanged - Raised when a property of debuggable WebView is changed, for example it's title. The callback has three arguments - deviceIdentifier, appIdentifier and webViewInfo.

Sample usage:

require("mobile-cli-lib")
	.deviceEmitter.on("debuggableViewChanged",  function(deviceIdentifier, appIdentifier, debuggableViewInfo) {
	console.log("On device " + deviceIdentifier + " the application " + appIdentifier  + " has changes in WebView: " + debuggableViewInfo);
});

Sample result for debuggableViewInfo will be:

{
	"description": "",
	"devtoolsFrontendUrl": "http://chrome-devtools-frontend.appspot.com/serve_rev/@211d45a5b74b06d12bb016f3c4d54095faf2646f/inspector.html?ws=127.0.0.1:53213/devtools/page/4050",
	"id": "4050",
	"title": "New tab 2",
	"type": "page",
	"url": "chrome-native://newtab/",
	"webSocketDebuggerUrl": "ws://127.0.0.1:53213/devtools/page/4050"
}

• companionAppInstalled - Raised when application is removed from device. The callback has two arguments - deviceIdentifier and framwork.
  
  Sample usage:

require("mobile-cli-lib").deviceEmitter.on("companionAppInstalled",  function(identifier, framwework) {
	console.log("Companion app for " + framework  + " has been installed on device with id: " + identifier);
});

• companionAppUninstalled - Raised when application is removed from device. The callback has two arguments - deviceIdentifier and framwork.
  
  Sample usage:

require("mobile-cli-lib").deviceEmitter.on("companionAppUninstalled",  function(identifier, framwework) {
	console.log("Companion app for " + framework  + " has been uninstalled from device with id: " + identifier);
});

Stability: 2 - Stable

This module allows interaction with devices. You can get a list of the attached devices or deploy on specific devices.

• getDevices() - This function returns array of all connected devices. For each of them the following information is provided: Sample usage:

var devices = require("mobile-cli-lib").devicesService.getDevices();
devices.forEach(function(device) {
	console.log("Device " + device.identifier + " is connected.");
});

• deployOnDevices(deviceIdentifiers: string[], packageFile: string, appId: string, projectName: string) - Deploys the specified package to the specified devices. Returns array of Promises. Each of them will be rejected in case the file cannot be deployed on the device or in case there's no device with such identifier. The function accepts three arguments:
  • deviceIdentifiers - array of the unique identifiers of the devices where the application will be deployed.
  • packageFile - path to the specified package (.apk or .ipa);
  • appId - the identifier of the package. This corresponds to id from package.json.
  • projectName - the project name, this is usually the dir name of the project

Sample usage:

Promise.all(require("mobile-cli-lib")
				.devicesService
				.deployOnDevices(["129604ab96a4d0053023b4bf5b288cf34a9ed5fa", "153544fa45f4a5646543b5bf1b221fe31a8fa6bc"], "./app.ipa", "com.telerik.testApp", "Test App"))
			.then(function(data) {
				console.log(data);
			}, function(err) {
				console.log(err);
			});

• setLogLevel(logLevel: string, deviceIdentifier?: string) - Sets the logging level for device(s) to INFO or FULL. The method has two parameters, only the first one is mandatory. When only logLevel is passed, it's value is used for all currently connected devices and all devices that will be connected in the future. By default the logging level is set to INFO. For example when there are two devices attached and this method is called in the following way:

require("mobile-cli-lib").devicesService.setLogLevel("FULL");

Everything that the devices report will be raised in deviceEmitter.deviceLogData event. When a new device is attached, all of the information that it reports will also be send. When the deviceIdentifier is passed, the value of the log level will be used only for this device. For example when all devices report all of their logs (FULL) level, you may call:

require("mobile-cli-lib").devicesService.setLogLevel("INFO", "129604ab96a4d0053023b4bf5b288cf34a9ed5fa");

This will set the logging level to INFO only for device with identifier 129604ab96a4d0053023b4bf5b288cf34a9ed5fa.

• isAppInstalledOnDevices(deviceIdentifiers: string[], appIdentifier: string, framework: string): Promise<IAppInstalledInfo>[] - checks if the specified application is installed on each of the specified devices and is LiveSync supported for this application. The returned type for each device is IAppInstalledInfo:

/**
 * Describes if LiveSync is supported for specific device and application.
 */
interface IAppInstalledInfo extends ILiveSyncSupportedInfo {
	/**
	 * Unique identifier of the device.
	 */
	deviceIdentifier: string;

	/**
	 * Application identifier.
	 */
	appIdentifier: string;

	/**
	 * Defines if application is installed on device.
	 */
	isInstalled: boolean;

	/**
	 * Result, indicating is livesync supported for specified device and specified application.
	 * `true` in case livesync is supported and false otherwise.
	 */
	isLiveSyncSupported: boolean;
}

NOTE: This method will try to start the application on each device in order to understand is LiveSync supported. Sample usage:

Promise.all(require("mobile-cli-lib")
				.devicesService
				.isAppInstalledOnDevices(devicesFound, "com.telerik.myApp", "cordova"))
		.then(function(data) {
			console.log(data);
		}, function(err) {
			console.log(err);
		});

Sample result will be:

[{
	"deviceIdentifier": "deviceId1",
	"appIdentifier": "appId",
	"isInstalled": true,
	"isLiveSyncSupported": true
}, {
	"deviceIdentifier": "deviceId2",
	"appIdentifier": "appId",
	"isInstalled": false,
	"isLiveSyncSupported": false
}]

• isCompanionAppInstalledOnDevices(deviceIdentifiers: string[], framework: string): Promise<IAppInstalledInfo>[] - checks if the companion application is installed on each of the specified devices and is LiveSync supported for this application. The returned type for each device is IAppInstalledInfo (check above for full description of the interface). Sample usage:

Promise.all(require("mobile-cli-lib")
				.devicesService
				.isCompanionAppInstalledOnDevices(devicesFound, "cordova"))
		.then(function(data) {
			console.log(data);
		}, function(err) {
			console.log(err);
		});

Sample result will be:

[{
	"deviceIdentifier": "deviceId1",
	"appIdentifier": "com.telerik.AppBuilder",
	"isInstalled": true,
	"isLiveSyncSupported": true
}, {
	"deviceIdentifier": "deviceId2",
	"appIdentifier": "com.telerik.AppBuilder",
	"isInstalled": false,
	"isLiveSyncSupported": false
}]

• mapAbstractToTcpPort(deviceIdentifier: string, appIdentifier: string, framework: string): Promise<string> - This function forwards the abstract port of the web view on the device to available tcp port on the host and returns the tcp port.

Sample usage:

require("mobile-cli-lib").devicesService.mapAbstractToTcpPort("4df18f307d8a8f1b", "com.telerik.test", "Cordova")
	.then(function(port) {
		console.log(port);
	}, function(err) {
		console.log(err);
	});

• getDebuggableApps(deviceIdentifiers: string[]): Promise<IDeviceApplicationInformation[]>[] - This function checks the proc/net/unix file of each device from the deviceIdentifiers argument for web views connected to abstract ports and returns information about the applications.

/**
 * Describes basic information about application on device.
 */
interface IDeviceApplicationInformation {
	/**
	 * The device identifier.
	 */
	deviceIdentifier: string;

	/**
	 * The application identifier.
	 */
	appIdentifier: string;

	/**
	 * The framework of the project (Cordova or NativeScript).
	 */
	framework: string;
}

Sample usage:

Promise.all(require("mobile-cli-lib").devicesService.getDebuggableApps(["4df18f307d8a8f1b", "JJY5KBTW75TCHQUK"]))
	.then(function(data) {
		data.forEach(function(apps) {
			console.log(apps);
		});
	}, function(err) {
		console.log(err);
	});

Sample result will be:

[[{
	"deviceIdentifier": "4df18f307d8a8f1b",
	"appIdentifier": "com.telerik.Fitness",
	"framework": "NativeScript"
}, {
	"deviceIdentifier": "4df18f307d8a8f1b",
	"appIdentifier": "com.telerik.livesynctest",
	"framework": "Cordova"
}], [{
	"deviceIdentifier": "JJY5KBTW75TCHQUK",
	"appIdentifier": "com.telerik.PhotoAlbum",
	"framework": "NativeScript"
}]]

• getDebuggableApps(deviceIdentifiers: string[]): Promise<IDeviceApplicationInformation[]>[] - This function checks the proc/net/unix file of each device from the deviceIdentifiers argument for web views connected to abstract ports and returns information about the applications.

/**
 * Describes basic information about application on device.
 */
interface IDeviceApplicationInformation {
	/**
	 * The device identifier.
	 */
	deviceIdentifier: string;

	/**
	 * The application identifier.
	 */
	appIdentifier: string;

	/**
	 * The framework of the project (Cordova or NativeScript).
	 */
	framework: string;
}

Sample usage:

Promise.all(require("mobile-cli-lib").devicesService.getDebuggableApps(["4df18f307d8a8f1b", "JJY5KBTW75TCHQUK"]))
	.then(function(data) {
		data.forEach(function(apps) {
			console.log(apps);
		});
	}, function(err) {
		console.log(err);
	});

Sample result will be:

[[{
	"deviceIdentifier": "4df18f307d8a8f1b",
	"appIdentifier": "com.telerik.Fitness",
	"framework": "NativeScript"
}, {
	"deviceIdentifier": "4df18f307d8a8f1b",
	"appIdentifier": "com.telerik.livesynctest",
	"framework": "Cordova"
}], [{
	"deviceIdentifier": "JJY5KBTW75TCHQUK",
	"appIdentifier": "com.telerik.PhotoAlbum",
	"framework": "NativeScript"
}]]

• getDebuggableViews(deviceIdentifier: string, appIdentifier: string): Promise<IDebugWebViewInfo[]> - This function returns WebViews that can be debugged for specified application on specified device.

NOTE: This method works only for Cordova based applications. DO NOT pass appIdentifier of NativeScript application.

/**
 * Describes information for WebView that can be debugged.
 */
interface IDebugWebViewInfo {
	/**
	 * Short description of the view.
	 */
	description: string;

	/**
	 * Url to the devtools.
	 * @example http://chrome-devtools-frontend.appspot.com/serve_rev/@211d45a5b74b06d12bb016f3c4d54095faf2646f/inspector.html?ws=127.0.0.1:53213/devtools/page/4024
	 */
	devtoolsFrontendUrl: string;

	/**
	 * Unique identifier of the web view. Could be number or GUID.
	 * @example 4027
	 */
	id: string;

	/**
	 * Title of the WebView.
	 * @example https://bit.ly/12345V is not available
	 */
	title: string;

	/**
	 * Type of the WebView.
	 * @example page
	 */
	type: string;

	/**
	 * URL loaded in the view.
	 * @example https://bit.ly/12345V
	 */
	url: string;

	/**
	 * Debugger URL.
	 * @example ws://127.0.0.1:53213/devtools/page/4027
	 */
	webSocketDebuggerUrl: string;
}

Sample usage:

require("mobile-cli-lib")
	.devicesService
	.getDebuggableViews("4df18f307d8a8f1b", "com.telerik.cordovaApp")
	.then(function(data) {
		console.log(data);
	}, function(err) {
		console.log(err);
	});

Sample result will be:

[{
		"description": "",
		"devtoolsFrontendUrl": "http://chrome-devtools-frontend.appspot.com/serve_rev/@211d45a5b74b06d12bb016f3c4d54095faf2646f/inspector.html?ws=127.0.0.1:53213/devtools/page/4050",
		"id": "4050",
		"title": "New tab",
		"type": "page",
		"url": "chrome-native://newtab/",
		"webSocketDebuggerUrl": "ws://127.0.0.1:53213/devtools/page/4050"
	},

	{
		"description": "",
		"devtoolsFrontendUrl": "http://chrome-devtools-frontend.appspot.com/serve_rev/@211d45a5b74b06d12bb016f3c4d54095faf2646f/inspector.html?ws=127.0.0.1:53213/devtools/page/4032",
		"id": "4032",
		"title": "New tab",
		"type": "page",
		"url": "chrome-native://newtab/",
		"webSocketDebuggerUrl": "ws://127.0.0.1:53213/devtools/page/4032"
	}
]

• getInstalledApplications(deviceIdentifier: string): Promise<string[]> - returns information about applications installed on specified device. The method will reject the resulting Promise in case the passed deviceIdentifier is not found (i.e. there's no currently attached device with this identifier).

Sample usage:

require("mobile-cli-lib").devicesService.getInstalledApplications("4df18f307d8a8f1b")
	.then(function(appIdentifiers) {
		console.log("Installed applications are: ", appIdentifiers);
	}, function(err) {
		console.log(err);
	});

Sample result of the method call is:

["com.telerik.app1", "org.nativescript.app1"]

Stability: 1 - Could be changed due to some new requirments.

This module allows LiveSync applications on different devices.

The following types are used:

/**
 * Describes the result of a single livesync operation started by Proton.
 */
interface ILiveSyncOperationResult {
	/**
	 * Defines if the operation is successful (set to true) or not (value is false).
	 */
	isResolved: boolean;

	/**
	 * Error when livesync operation fails. If `isResolved` is true, error will be undefined.
	 */
	error?: Error;
}

/**
 * Describes result of all LiveSync operations per device.
 */
interface IDeviceLiveSyncResult {
	/**
	 * Identifier of the device.
	 */
	deviceIdentifier: string;

	/**
	 * Result of LiveSync operation for application.
	 */
	liveSyncToApp?: ILiveSyncOperationResult;

	/**
	 * Result of LiveSync operation to companion app.
	 */
	liveSyncToCompanion?: ILiveSyncOperationResult;
}

• livesync(devicesInfo: IDeviceLiveSyncInfo[], projectDir: string, filePaths?: string[]): Promise<IDeviceLiveSyncResult>[] - LiveSync changes on the specified devices. In case filePaths are not specified, the whole project directory will be synced. The devicesInfo array describes livesync operations for each device. Each object should be described with the following properties:

/**
 * Describes device's LiveSync information.
 */
interface IDeviceLiveSyncInfo {
	/**
	 * Unique identifier of the device.
	 */
	deviceIdentifier: string;

	/**
	 * Defines if changes have to be synced to installed application.
	 */
	syncToApp: boolean;

	/**
	 * Defines if changes have to be synced to companion app.
	 */
	syncToCompanion: boolean;
}

Sample usage:

var deviceInfos = [{"deviceIdentifier": "129604ab96a4d0053023b4bf5b288cf34a9ed5fa", "syncToApp": true, "syncToCompanion": false},
					{"deviceIdentifier": "153544fa45f4a5646543b5bf1b221fe31a8fa6bc", "syncToApp": true, "syncToCompanion": false}];
// Full Sync - the whole project dir will be synced
Promise.all(require("mobile-cli-lib").liveSyncService.livesync(deviceInfos, projectDir))
	.then(function(result) {
			console.log("Finished with full sync, result is: ", result);
	}).catch(function(err) {
			console.log("Error while livesyncing: ", err);
	});

// Or use livesync only for some files:
var filesToSync = [path.join(projectDir,"app","components", "homeView", "homeView.xml"),
					path.join(projectDir,"app","components", "addressView", "addressView.xml")]
Promise.all(require("mobile-cli-lib").liveSyncService.livesync(deviceInfos, projectDir, filesToSync))
	.then(function(result) {
			console.log("Finished with partial sync, result is: ", result);
	}).catch(function(err) {
			console.log("Error while livesyncing: ", err);
	});

• deleteFiles(devicesInfo: IDeviceLiveSyncInfo[], projectDir: string, filePaths: string[]): Promise<IDeviceLiveSyncResult>[] - Deletes specified files from devices's livesync directories. The devicesInfo array describes livesync operations for each device. Check livesync method above fore more information.

Sample usage:

var deviceInfos = [{"deviceIdentifier": "129604ab96a4d0053023b4bf5b288cf34a9ed5fa", "syncToApp": true, "syncToCompanion": false},
					{"deviceIdentifier": "153544fa45f4a5646543b5bf1b221fe31a8fa6bc", "syncToApp": true, "syncToCompanion": false}];

var filesToSync = [path.join(projectDir,"app","components", "homeView", "homeView.xml"),
					path.join(projectDir,"app","components", "addressView", "addressView.xml")]
Promise.all(require("mobile-cli-lib").liveSyncService.deleteFiles(deviceInfos, projectDir, filesToSync))
	.then(function(result) {
			console.log("Finished with deleting files, result is: ", result);
	}).catch(function(err) {
			console.log("Error while deleting files: ", err);
	});

Stability: 1 - Could be changed due to some new requirments.

This module is used to install or uninstall packages from npm.

The following types are used:

/**
 * Describes information for single npm dependency that has to be installed.
 */
interface INpmDependency {
	/**
	 * Name of the dependency.
	 */
	name: string;

	/**
	 * @optional The version of the dependency that has to be installed.
	 */
	version?: string;

	/**
	 * Defines if @types/<name> should be installed as well.
	 */
	installTypes: boolean;
}

/**
 * Describes the result of npm install command.
 */
interface INpmInstallResult {
	/**
	 * The result of installing a single dependency.
	 */
	result?: INpmInstallDependencyResult,

	/**
	 * The error that occurred during the operation.
	 */
	error?: Error;
}

• install(packageName: string, pathToSave: string, config: IDictionary<string | boolean>): Promise<INpmInstallResult> - Installs everything from package.json or specified dependency. In case there's information which dependency to install, the method will check it and install only this dependency and possibly its @types.

Note that the last argument - config can be used to pass flags to the npm install opration like save, save-dev, ignore-scripts and so on.

Sample usage:

// Install all dependencies from package.json.
require("mobile-cli-lib").npmService.install("lodash@3.x", "D:\\test\\project", { save: true, "save-exact": true })
	.then(function(result) {
			console.log("The npm result is: ", result);
	}).catch(function(err) {
			console.log("Error while installing packages from npm: ", err);
	});

Sample result will be:

{}

// Install specific dependency from npm.
var dependency = {
	name: "lodash",
	version: "4.15.0",
	installTypes: true
};

require("mobile-cli-lib").npmService.install("D:\\test\\project", dependency)
	.then(function(result) {
			console.log("The npm result is: ", result);
	}).catch(function(err) {
			console.log("Error while installing packages from npm: ", err);
	});

Sample result will be:

{
	"result": {
		"isInstalled": true,
		"isTypesInstalled": true
	}
}

• uninstall(projectDir: string, dependency: string): Promise - Uninstalls the dependency and the @types/ devDependency. The method will remove them from package.json and from node_modules dir.

Sample usage:

require("mobile-cli-lib").npmService.uninstall("D:\\test\\project", "lodash")
	.then(function() {
			console.log("The dependency is uninstalled.");
	}).catch(function(err) {
			console.log("Error while uninstalling packages from npm: ", err);
	});

Similar to AngularJS, mobile-cli-lib is using $injector to retrive object instances, instantiate types and load modules. Each module must be registered in the $injector, so when another module depends on it, the $injector will create a new instance of the dependency or reuse already created one.

• Add a new file with kebab-case (spinal-case) name. For example when the class that you'll add is called DeviceService, it is good practice to call the file device-service.ts.

• Add your class in the file. The class name should be in Pascal case

class DeviceService {
}

NOTE: The reference path at the top must point the the root of the project, where .d.ts file is created by grunt.

• Register the class in the injector with the name that all other modules will use when they want instance of the DeviceService. The name should be in Camel case:

class DeviceService {
}
$injector.register("deviceService", DeviceService);

• Add the methods you need in your implementation:

class DeviceService {
	public listDevices(): void {
		// implementation is here
	}
}
$injector.register("deviceService", DeviceService);

• If your class depends on other modules, registered in the $injector, you can access them by adding them as parameters of the constructor:

class DeviceService {
	constructor(private $fs: IFileSystem) { }
}
$injector.register("deviceService", DeviceService);

NOTE: In case you do not place access modifier (private, protected or public, you'll be able to use the dependant module only in the constructor.

NOTE: The name of the module must be exactly the same as the one used for registering in the $injector, in this case this is fs module. The preceding dollar symbol $ is mandatory. Now you can access fs methods by using this.$fs.<method>.

• The last step is to add your module to bootstrap.ts:

$injector.require("deviceService", "./device-service");

This line tells the $injector to look for module called "deviceService" in a file device-service located at the root of the mobile-cli-lib.

NOTE: The name of the module must be the same as the one used in $injector.register call. $injector.require will not load the file. It will be loaded by $injector when someone asks for module "deviceService".

In order to expose public API, we use TypeScript decorators and some "magic" in our bootstrapping. When you want to expose method B from class A, you have to do the following:

• In bootstrap.ts make sure to use requirePublic method of the $injector when requiring the file:

$injector.requirePublic("deviceService", "./device-service")

• Add the exported decorator on the method which you want to expose: @decorators.exported('deviceService'), where decorators are imported from the root of the project: import decorators = require("./decorators");

IMPORTANT: exported decorator requires one parameter which MUST be the first parameter passed to requirePublic method. This is the name of the module that will be publicly exposed.

After you have executed these two steps, you can start using your publicly available method:

var common = require("mobile-cli-lib");
common.deviceService.listDevices() /* NOTE: here we are not using the class name DeviceService, but the module name - deviceService */
	.then(function (a) {
    	console.log("After promise had returned.");
    	return a;
	})
    .catch(function (err) {
    	console.log("Error happened:");
    	console.log(err);
	});

requirePublic method of the injector is doing some "magic" in order to support lazy loading, correct dependency resolving and exposing only some of the methods, not the whole power of the common lib. When you require mobile-cli-lib module, you receive $injector's publicApi - it is the "exported one". requirePublic method defines getter for each module that is passed, for example when you say:

	$injector.requirePublic("deviceService", "./device-service")

a new property is added to publicApi - deviceService and a getter is added for it. When you try to access this module, require("mobile-cli-lib").deviceService.listDevices(), the getter is called. It resolves the module, by parsing the provided file (./device-service) and that's the time when decorators are executed. For each decorated method, a new entry in $injector.publicApi.__modules__ is created. This is not the same method that you've decorated - it's entirely new method, that returns a Promise. The new method will be used in the publicApi, while original implementation will still be used in all other places in the code. The promisified method will call the original one (in a separate Fiber) and will resolve the Promise with the result of the method.

Some of our modules must be added: staticConfig, config, analyticsService, etc.

Add more tests for yok and for register decorator.