FazBrowse GitHub Viewer | Trending |
URL:
| Home
Tools: [Download Repo ZIP]   [Original HTTPS Page]

DDNetPulse/scripts/android at master · PulseClient-ddnet/DDNetPulse · GitHub

/ DDNetPulse Public

Breadcrumbs

  1. DDNetPulse
  2. scripts

android

Directory actions

More options

Directory actions

More options

Latest commit

 

History

History

Breadcrumbs

  1. DDNetPulse
  2. scripts

android

Folders and files

NameName
Last commit message
Last commit date

parent directory

..
files
files
 
 
README.md
README.md
 
 
cmake_android.sh
cmake_android.sh
 
 

README.md

Requirements for building for Android on Linux

  • At least 10-15 GiB of free disk space.
  • First follow the general instructions for setting up https://github.com/ddnet/ddnet for building on Linux.
  • Install the Android NDK (version 26) in the same location where Android Studio would unpack it (~/Android/Sdk/ndk/): 
    mkdir ~/Android
cd ~/Android
mkdir Sdk
cd Sdk
mkdir ndk
cd ndk
wget https://dl.google.com/android/repository/android-ndk-r26d-linux.zip
unzip android-ndk-r26d-linux.zip
unlink android-ndk-r26d-linux.zip
  • Install the Android SDK build tools (version 30.0.3) in the same location where Android Studio would unpack them (~/Android/Sdk/build-tools/): 
    # Assuming you already created the Android/Sdk folders in the previous step
cd ~/Android/Sdk
mkdir build-tools
cd build-tools
wget https://dl.google.com/android/repository/build-tools_r30.0.3-linux.zip
unzip build-tools_r30.0.3-linux.zip
unlink build-tools_r30.0.3-linux.zip
mv android-11 30.0.3
  • Install the Android command-line tools and accept the licenses using the SDK manager, otherwise the Gradle build will fail if the licenses have not been accepted: 
    # Assuming you already created the Android/Sdk folders in the previous step
cd ~/Android/Sdk
mkdir cmdline-tools
cd cmdline-tools
wget https://dl.google.com/android/repository/commandlinetools-linux-11076708_latest.zip
unzip commandlinetools-linux-11076708_latest.zip
unlink commandlinetools-linux-11076708_latest.zip
mv cmdline-tools latest
yes | latest/bin/sdkmanager --licenses
  • Install OpenJDK 21: 
    sudo apt install openjdk-21-jdk
  • Install ninja: 
    sudo apt install ninja-build
  • Install curl: 
    sudo apt install curl
  • (macOS only) Install coreutils so nproc is available: 
    brew install coreutils
  • Build the ddnet-libs for Android (see below). Follow all above steps first. Alternatively, use the precompiled libraries from https://github.com/ddnet/ddnet-libs/.

Requirements for building for Android on Windows using MSYS2

  • At least 50 GiB of free disk space if you start from scratch.
  • First install MSYS2 (https://www.msys2.org/wiki/MSYS2-installation/) as well as all required packages for building DDNet using MSYS2 on Windows. (There is currently no more detailed guide for this.)
  • Install JDK 21, e.g. from https://adoptium.net/temurin/releases/?package=jdk&os=windows&version=21
  • Install ninja: 
    pacman -S mingw-w64-x86_64-ninja
  • Install curl: 
    pacman -S mingw-w64-x86_64-curl
  • Install coreutils so nproc is available: 
    pacman -S coreutils
  • Compiling the libraries is not supported on Windows yet. Use the precompiled libraries from https://github.com/ddnet/ddnet-libs/, i.e. make sure to also clone the ddnet-libs submodule, or compile the libraries on a separate Linux system.
  • Set the ANDROID_HOME environment variable to override the location where the Android SDK will be installed, e.g. C:/Android/SDK. Make sure to only use forward slashes.
  • Install either Android Studio (which includes an SDK manager GUI) from https://developer.android.com/studio or the standalone command-line tools (which include the sdkmanager tool) from https://developer.android.com/studio/#command-line-tools-only.
  • When using the command-line tools: Ensure the command-line tools are installed at the expected location, so %ANDROID_HOME%/cmdline-tools/latest/bin should contain sdkmanager.bat. Accept the licenses using the SDK manager, otherwise the Gradle build will fail if the licenses have not been accepted: 
    yes | $ANDROID_HOME/cmdline-tools/latest/bin/sdkmanager.bat --licenses
  • Install the following using the SDK Manager in Android Studio (Tools menu) or the sdkmanager command-line tool:
    • SDK Platform for API Level 34
    • NDK (Side by side)
    • Android SDK Build-Tools (latest version)

How to build the ddnet-libs for Android

  • Note: This has only been tested on Linux.
  • Install 7-Zip: 
    sudo apt install p7zip-full
  • There is a script to automatically download and build all repositories, this requires an active internet connection and can take around 30 minutes: 
    mkdir build-android-libs
scripts/compile_libs/gen_libs.sh build-android-libs android
    Warning: Do not choose a directory inside the src folder!
  • If you see several red error messages in the first few minutes, abort the compilation with repeated Ctrl+C presses. Examine the output and ensure that you installed the NDK to the correct location.
  • After the script finished executing, it should have created a ddnet-libs directory in your selected output folder, which contains all libraries in the correct directory format and can be merged with the ddnet-libs folder in the source directory: 
    cp -r build-android-libs/ddnet-libs/. ddnet-libs/

How to build the DDNet client for Android

  • These steps are identical on Linux and Windows, except on Windows bash must be used as terminal and not cmd.exe or PowerShell.
  • Open a terminal inside the ddnet project root directory and run the following: 
    scripts/android/cmake_android.sh <x86/x86_64/arm/arm64/all> <Game name> <Package name> <Debug/Release> <Build folder>
    • The first parameter denotes the architecture. Use all to compile for all architectures. Note that all architectures will be compiled in parallel. For testing, only compile for one architecture initially to get readable output.
    • The second parameter denotes the APK name, which must be equal to the library name. If you want to rename the APK, do it after the build.
    • The third parameter denotes the package name of the APK.
    • The fourth parameter denotes the build type.
    • The fifth parameter denotes the build folder.
  • Example to build only for x86_64 architecture in debug mode: 
    scripts/android/cmake_android.sh x86_64 DDNet org.ddnet.client Debug build-android-debug
  • To build a signed APK, generate a signing key and export environment variables before running the build script: 
    keytool -genkey -v -keystore my-release-key.jks -keyalg RSA -keysize 2048 -validity 10000 -alias my-alias
export TW_KEY_NAME=<key name>
export TW_KEY_PW=<key password>
export TW_KEY_ALIAS=<key alias>
  • By default, the version code and name of the APK will be determined automatically based on the definitions in src/game/version.h. You can also specify the build version code and name manually before running the build script, e.g.: 
    export TW_VERSION_CODE=20210819
export TW_VERSION_NAME="1.0"
    The version code must increase for newer version in order for users to automatically update to them. The version name is the string that will be displayed to the user, e.g. 1.2.3-snapshot4.
  • Example to build a signed APK in release mode for all architectures: 
    keytool -genkey -v -keystore Teeworlds.jks -keyalg RSA -keysize 2048 -validity 10000 -alias Teeworlds-Key
# It will prompt for the password, input for example "mypassword"
export TW_KEY_NAME=Teeworlds.jks
export TW_KEY_PW=mypassword
export TW_KEY_ALIAS=Teeworlds-Key
# Version code and name will be determined automatically
scripts/android/cmake_android.sh all DDNet org.ddnet.client Release build-android-release
  • Note that you should only generate a signing key once (and make backups). Users can only update apps automatically if the same package name and signing key have been used, else they must manually uninstall the old app.

Common problems and solutions

  • If the Gradle build fails with errors messages indicating bugs relating to files in the Gradle cache, try to clear the Gradle cache by deleting the contents of the folder ~/.gradle/caches (%USERPROFILE%/.gradle/caches on Windows).
  • The Gradle build may show a message that the JDK version could not be determined but this can safely be ignored.
  • The Gradle build will fail with errors messages indicating an unsupported class file version if a different version of the JDK is used than specified in build.gradle. When incrementing the supported JDK version, the Gradle version also has to be incremented according to https://docs.gradle.org/current/userguide/compatibility.html. If you have multiple JDKs installed, you can set the JDK version for Gradle using the property org.gradle.java.home in the gradle.properties file in your Gradle home directory.
Back | FazBrowse Home | New Git URL