This topic shows how to quickly install a DroneKit-Python development environment and run a simple example to get vehicle attributes from a simulated Copter.

DroneKit-Python and the dronekit-sitl simulator are installed from pip on all platforms.

On Linux you will first need to install pip and python-dev:

sudo apt-get install python-pip python-dev

pip is then used to install dronekit and dronekit-sitl. Mac and Linux may require you to prefix these commands with sudo:

pip install dronekit
pip install dronekit-sitl

See :doc:`../develop/installation` and dronekit-sitl for more detailed installation instructions.

The script below first launches the simulator. It then imports and calls the :py:func:`connect() <dronekit.connect>` method, specifying the simulator's connection string (tcp:127.0.0.1:5760). The method returns a :py:class:`Vehicle <dronekit.Vehicle>` object that we then use to query the attributes.

print "Start simulator (SITL)"
import dronekit_sitl
sitl = dronekit_sitl.start_default()
connection_string = sitl.connection_string()

# Import DroneKit-Python
from dronekit import connect, VehicleMode

# Connect to the Vehicle.
print("Connecting to vehicle on: %s" % (connection_string,))
vehicle = connect(connection_string, wait_ready=True)

# Get some vehicle attributes (state)
print "Get some vehicle attribute values:"
print " GPS: %s" % vehicle.gps_0
print " Battery: %s" % vehicle.battery
print " Last Heartbeat: %s" % vehicle.last_heartbeat
print " Is Armable?: %s" % vehicle.is_armable
print " System status: %s" % vehicle.system_status.state
print " Mode: %s" % vehicle.mode.name    # settable

# Close vehicle object before exiting script
vehicle.close()

# Shut down simulator
sitl.stop()
print("Completed")

Copy the text above into a new text file (hello.py) and run it in the same way as you would any other standalone Python script.

python hello.py

You should see the following output from the simulated vehicle:

Start simulator (SITL)
Downloading SITL from http://dronekit-assets.s3.amazonaws.com/sitl/copter/sitl-win-copter-3.3.tar.gz
Extracted.
Connecting to vehicle on: 'tcp:127.0.0.1:5760'
>>> APM:Copter V3.3 (d6053245)
>>> Frame: QUAD
>>> Calibrating barometer
>>> Initialising APM...
>>> barometer calibration complete
>>> GROUND START
Get some vehicle attribute values:
 GPS: GPSInfo:fix=3,num_sat=10
 Battery: Battery:voltage=12.587,current=0.0,level=100
 Last Heartbeat: 0.713999986649
 Is Armable?: False
 System status: STANDBY
 Mode: STABILIZE
Completed

That's it- you've run your first DroneKit-Python script.

• Learn more about :doc:`../develop/index`. This covers development best practices and coding standards, and has more information about installation, working with a simulator and setting up a companion computer.
• Read through our step by step :doc:`index` to learn how to connect to your vehicle, takeoff, fly, and much more.
• Check out our :doc:`../examples/index`.