@@ -198,7 +198,7 @@ These do not emulate the native look-and-feel of the platform.
    A subclass of FileDialog that creates a dialog window for selecting a
    destination file.
 
-    .. method:: ok_command()
+   .. method:: ok_command()
 
       Test whether or not the selection points to a valid file that is not a
       directory. Confirmation is required if an already existing file is
 
@@ -56,7 +56,7 @@ helper, :class:`auto`.
     the bitwise operations without losing their :class:`Flag` membership.
 
 .. function:: unique
-   :noindex:
+    :noindex:
 
     Enum class decorator that ensures only one name is bound to any one value.
 
 
@@ -35,45 +35,45 @@ in :mod:`logging` itself) and defining handlers which are declared either in
 
 .. function:: dictConfig(config)
 
-    Takes the logging configuration from a dictionary.  The contents of
-    this dictionary are described in :ref:`logging-config-dictschema`
-    below.
-
-    If an error is encountered during configuration, this function will
-    raise a :exc:`ValueError`, :exc:`TypeError`, :exc:`AttributeError`
-    or :exc:`ImportError` with a suitably descriptive message.  The
-    following is a (possibly incomplete) list of conditions which will
-    raise an error:
-
-    * A ``level`` which is not a string or which is a string not
-      corresponding to an actual logging level.
-    * A ``propagate`` value which is not a boolean.
-    * An id which does not have a corresponding destination.
-    * A non-existent handler id found during an incremental call.
-    * An invalid logger name.
-    * Inability to resolve to an internal or external object.
-
-    Parsing is performed by the :class:`DictConfigurator` class, whose
-    constructor is passed the dictionary used for configuration, and
-    has a :meth:`configure` method.  The :mod:`logging.config` module
-    has a callable attribute :attr:`dictConfigClass`
-    which is initially set to :class:`DictConfigurator`.
-    You can replace the value of :attr:`dictConfigClass` with a
-    suitable implementation of your own.
-
-    :func:`dictConfig` calls :attr:`dictConfigClass` passing
-    the specified dictionary, and then calls the :meth:`configure` method on
-    the returned object to put the configuration into effect::
-
-          def dictConfig(config):
-              dictConfigClass(config).configure()
-
-    For example, a subclass of :class:`DictConfigurator` could call
-    ``DictConfigurator.__init__()`` in its own :meth:`__init__()`, then
-    set up custom prefixes which would be usable in the subsequent
-    :meth:`configure` call. :attr:`dictConfigClass` would be bound to
-    this new subclass, and then :func:`dictConfig` could be called exactly as
-    in the default, uncustomized state.
+   Takes the logging configuration from a dictionary.  The contents of
+   this dictionary are described in :ref:`logging-config-dictschema`
+   below.
+
+   If an error is encountered during configuration, this function will
+   raise a :exc:`ValueError`, :exc:`TypeError`, :exc:`AttributeError`
+   or :exc:`ImportError` with a suitably descriptive message.  The
+   following is a (possibly incomplete) list of conditions which will
+   raise an error:
+
+   * A ``level`` which is not a string or which is a string not
+     corresponding to an actual logging level.
+   * A ``propagate`` value which is not a boolean.
+   * An id which does not have a corresponding destination.
+   * A non-existent handler id found during an incremental call.
+   * An invalid logger name.
+   * Inability to resolve to an internal or external object.
+
+   Parsing is performed by the :class:`DictConfigurator` class, whose
+   constructor is passed the dictionary used for configuration, and
+   has a :meth:`configure` method.  The :mod:`logging.config` module
+   has a callable attribute :attr:`dictConfigClass`
+   which is initially set to :class:`DictConfigurator`.
+   You can replace the value of :attr:`dictConfigClass` with a
+   suitable implementation of your own.
+
+   :func:`dictConfig` calls :attr:`dictConfigClass` passing
+   the specified dictionary, and then calls the :meth:`configure` method on
+   the returned object to put the configuration into effect::
+
+         def dictConfig(config):
+             dictConfigClass(config).configure()
+
+   For example, a subclass of :class:`DictConfigurator` could call
+   ``DictConfigurator.__init__()`` in its own :meth:`__init__()`, then
+   set up custom prefixes which would be usable in the subsequent
+   :meth:`configure` call. :attr:`dictConfigClass` would be bound to
+   this new subclass, and then :func:`dictConfig` could be called exactly as
+   in the default, uncustomized state.
 
    .. versionadded:: 3.2
 
 
@@ -532,9 +532,9 @@ Analysis of the profiler data is done using the :class:`~pstats.Stats` class.
       instance holds information related to the function's profile such as how
       long the function took to run, how many times it was called, etc...
 
-       .. versionadded:: 3.9
-          Added the following dataclasses: StatsProfile, FunctionProfile.
-          Added the following function: get_stats_profile.
+      .. versionadded:: 3.9
+         Added the following dataclasses: StatsProfile, FunctionProfile.
+         Added the following function: get_stats_profile.
 
 .. _deterministic-profiling:
 
 
@@ -56,12 +56,12 @@ created.  Socket addresses are represented as follows:
   bytes-like object can be used for either type of address when
   passing it as an argument.
 
-   .. versionchanged:: 3.3
-      Previously, :const:`AF_UNIX` socket paths were assumed to use UTF-8
-      encoding.
+  .. versionchanged:: 3.3
+     Previously, :const:`AF_UNIX` socket paths were assumed to use UTF-8
+     encoding.
 
-   .. versionchanged:: 3.5
-      Writable :term:`bytes-like object` is now accepted.
+  .. versionchanged:: 3.5
+     Writable :term:`bytes-like object` is now accepted.
 
 .. _host_port:
 
 
@@ -153,47 +153,47 @@ Programmatic Interface
    count information.  *timing* enables a timestamp relative to when tracing was
    started to be displayed.
 
-    .. method:: run(cmd)
+   .. method:: run(cmd)
 
-       Execute the command and gather statistics from the execution with
-       the current tracing parameters.  *cmd* must be a string or code object,
-       suitable for passing into :func:`exec`.
+      Execute the command and gather statistics from the execution with
+      the current tracing parameters.  *cmd* must be a string or code object,
+      suitable for passing into :func:`exec`.
 
-    .. method:: runctx(cmd, globals=None, locals=None)
+   .. method:: runctx(cmd, globals=None, locals=None)
 
-       Execute the command and gather statistics from the execution with the
-       current tracing parameters, in the defined global and local
-       environments.  If not defined, *globals* and *locals* default to empty
-       dictionaries.
+      Execute the command and gather statistics from the execution with the
+      current tracing parameters, in the defined global and local
+      environments.  If not defined, *globals* and *locals* default to empty
+      dictionaries.
 
-    .. method:: runfunc(func, /, *args, **kwds)
+   .. method:: runfunc(func, /, *args, **kwds)
 
-       Call *func* with the given arguments under control of the :class:`Trace`
-       object with the current tracing parameters.
+      Call *func* with the given arguments under control of the :class:`Trace`
+      object with the current tracing parameters.
 
-    .. method:: results()
+   .. method:: results()
 
-       Return a :class:`CoverageResults` object that contains the cumulative
-       results of all previous calls to ``run``, ``runctx`` and ``runfunc``
-       for the given :class:`Trace` instance.  Does not reset the accumulated
-       trace results.
+      Return a :class:`CoverageResults` object that contains the cumulative
+      results of all previous calls to ``run``, ``runctx`` and ``runfunc``
+      for the given :class:`Trace` instance.  Does not reset the accumulated
+      trace results.
 
 .. class:: CoverageResults
 
    A container for coverage results, created by :meth:`Trace.results`.  Should
    not be created directly by the user.
 
-    .. method:: update(other)
+   .. method:: update(other)
 
-       Merge in data from another :class:`CoverageResults` object.
+      Merge in data from another :class:`CoverageResults` object.
 
-    .. method:: write_results(show_missing=True, summary=False, coverdir=None)
+   .. method:: write_results(show_missing=True, summary=False, coverdir=None)
 
-       Write coverage results.  Set *show_missing* to show lines that had no
-       hits.  Set *summary* to include in the output the coverage summary per
-       module.  *coverdir* specifies the directory into which the coverage
-       result files will be output.  If ``None``, the results for each source
-       file are placed in its directory.
+      Write coverage results.  Set *show_missing* to show lines that had no
+      hits.  Set *summary* to include in the output the coverage summary per
+      module.  *coverdir* specifies the directory into which the coverage
+      result files will be output.  If ``None``, the results for each source
+      file are placed in its directory.
 
 A simple example demonstrating the use of the programmatic interface::
 
 
@@ -913,8 +913,8 @@ Color control
       Set pencolor to the RGB color represented by *r*, *g*, and *b*.  Each of
       *r*, *g*, and *b* must be in the range 0..colormode.
 
-    If turtleshape is a polygon, the outline of that polygon is drawn with the
-    newly set pencolor.
+   If turtleshape is a polygon, the outline of that polygon is drawn with the
+   newly set pencolor.
 
    .. doctest::
       :skipif: _tkinter is None
@@ -962,8 +962,8 @@ Color control
       Set fillcolor to the RGB color represented by *r*, *g*, and *b*.  Each of
       *r*, *g*, and *b* must be in the range 0..colormode.
 
-    If turtleshape is a polygon, the interior of that polygon is drawn
-    with the newly set fillcolor.
+   If turtleshape is a polygon, the interior of that polygon is drawn
+   with the newly set fillcolor.
 
    .. doctest::
       :skipif: _tkinter is None
@@ -1001,8 +1001,8 @@ Color control
       Equivalent to ``pencolor(colorstring1)`` and ``fillcolor(colorstring2)``
       and analogously if the other input format is used.
 
-    If turtleshape is a polygon, outline and interior of that polygon is drawn
-    with the newly set colors.
+   If turtleshape is a polygon, outline and interior of that polygon is drawn
+   with the newly set colors.
 
    .. doctest::
       :skipif: _tkinter is None
 
@@ -217,7 +217,6 @@ Ellipsis
       There are two types of integers:
 
       Integers (:class:`int`)
-
          These represent numbers in an unlimited range, subject to available (virtual)
          memory only.  For the purpose of shift and mask operations, a binary
          representation is assumed, and negative numbers are represented in a variant of