Vector gn = (SS.GW.projRight).Cross(SS.GW.projUp);

gn = gn.WithMagnitude(1);

Group *g = SK.GetGroup(SS.GW.activeGroup);

g->GenerateDisplayItems();

if(g->displayMesh.IsEmpty()) {

Error(_("No solid model present; draw one with extrudes and revolves, "

"or use Export 2d View to export bare lines and curves."));

return;

}

// The plane in which the exported section lies; need this because we'll

// reorient from that plane into the xy plane before exporting.

Vector origin, u, v, n;

double d;

SS.GW.GroupSelection();

auto const &gs = SS.GW.gs;

if((gs.n == 0 && g->activeWorkplane != Entity::FREE_IN_3D)) {

Entity *wrkpl = SK.GetEntity(g->activeWorkplane);

origin = wrkpl->WorkplaneGetOffset();

n = wrkpl->Normal()->NormalN();

u = wrkpl->Normal()->NormalU();

v = wrkpl->Normal()->NormalV();

} else if(gs.n == 1 && gs.faces == 1) {

Entity *face = SK.GetEntity(gs.entity[0]);

origin = face->FaceGetPointNum();

n = face->FaceGetNormalNum();

if(n.Dot(gn) < 0) n = n.ScaledBy(-1);

u = n.Normal(0);

v = n.Normal(1);

} else if(gs.n == 3 && gs.vectors == 2 && gs.points == 1) {

Vector ut = SK.GetEntity(gs.entity[0])->VectorGetNum(),

vt = SK.GetEntity(gs.entity[1])->VectorGetNum();

ut = ut.WithMagnitude(1);

vt = vt.WithMagnitude(1);

if(fabs(SS.GW.projUp.Dot(vt)) < fabs(SS.GW.projUp.Dot(ut))) {

swap(ut, vt);

}

if(SS.GW.projRight.Dot(ut) < 0) ut = ut.ScaledBy(-1);

if(SS.GW.projUp. Dot(vt) < 0) vt = vt.ScaledBy(-1);

origin = SK.GetEntity(gs.point[0])->PointGetNum();

n = ut.Cross(vt);

u = ut.WithMagnitude(1);

v = (n.Cross(u)).WithMagnitude(1);

} else {

Error(_("Bad selection for export section. Please select:\n\n"

" * nothing, with an active workplane "

"(workplane is section plane)\n"

" * a face (section plane through face)\n"

" * a point and two line segments "

"(plane through point and parallel to lines)\n"));

return;

}

SS.GW.ClearSelection();

n = n.WithMagnitude(1);

d = origin.Dot(n);

SEdgeList el = {};

SBezierList bl = {};

// If there's a mesh, then grab the edges from it.

g->runningMesh.MakeEdgesInPlaneInto(&el, n, d);

// If there's a shell, then grab the edges and possibly Beziers.

bool export_as_pwl = SS.exportPwlCurves || fabs(SS.exportOffset) > LENGTH_EPS;

g->runningShell.MakeSectionEdgesInto(n, d, &el, export_as_pwl ? NULL : &bl);

// All of these are solid model edges, so use the appropriate style.

SEdge *se;

for(se = el.l.First(); se; se = el.l.NextAfter(se)) {

se->auxA = Style::SOLID_EDGE;

}

SBezier *sb;

for(sb = bl.l.First(); sb; sb = bl.l.NextAfter(sb)) {

sb->auxA = Style::SOLID_EDGE;

}

// Remove all overlapping edges/beziers to merge the areas they describe.

el.CullExtraneousEdges(/*both=*/true);

bl.CullIdenticalBeziers(/*both=*/true);

// Collect lines and beziers with custom style & export.

for(auto &ent : SK.entity) {

Entity *e = &ent;

if (!e->IsVisible()) continue;

if (e->style.v < Style::FIRST_CUSTOM) continue;

if (!Style::Exportable(e->style.v)) continue;

if (!e->IsInPlane(n,d)) continue;

if (export_as_pwl) {

e->GenerateEdges(&el);

} else {

e->GenerateBezierCurves(&bl);

}

}

// Only remove half of the overlapping edges/beziers to support TTF Stick Fonts.

el.CullExtraneousEdges(/*both=*/false);

bl.CullIdenticalBeziers(/*both=*/false);

// And write the edges.

VectorFileWriter *out = VectorFileWriter::ForFile(filename);

if(out) {

// parallel projection (no perspective), and no mesh

ExportLinesAndMesh(&el, &bl, NULL,

u, v, n, origin, 0,

out);

}

el.Clear();

bl.Clear();

Camera camera;

SEdgeList *edges;

const Camera &GetCamera() const override {

return camera;

}

void DrawLine(const Vector &a, const Vector &b, hStroke hcs) override {

edges->AddEdge(a, b, Style::CONSTRAINT);

}

void DrawEdges(const SEdgeList &el, hStroke hcs) override {

for(const SEdge &e : el.l) {

edges->AddEdge(e.a, e.b, Style::CONSTRAINT);

}

}

void DrawVectorText(const std::string &text, double height,

const Vector &o, const Vector &u, const Vector &v,

hStroke hcs) override {

auto traceEdge = [&](Vector a, Vector b) { edges->AddEdge(a, b, Style::CONSTRAINT); };

VectorFont::Builtin()->Trace(height, o, u, v, text, traceEdge, camera);

}

void DrawQuad(const Vector &a, const Vector &b, const Vector &c, const Vector &d,

hFill hcf) override {

// Do nothing

}

bool DrawBeziers(const SBezierList &bl, hStroke hcs) override {

ssassert(false, "Not implemented");

}

void DrawOutlines(const SOutlineList &ol, hStroke hcs, DrawOutlinesAs drawAs) override {

ssassert(false, "Not implemented");

}

void DrawPoint(const Vector &o, hStroke hcs) override {

ssassert(false, "Not implemented");

}

void DrawPolygon(const SPolygon &p, hFill hcf) override {

ssassert(false, "Not implemented");

}

void DrawMesh(const SMesh &m, hFill hcfFront, hFill hcfBack = {}) override {

ssassert(false, "Not implemented");

}

void DrawFaces(const SMesh &m, const std::vector<uint32_t> &faces, hFill hcf) override {

ssassert(false, "Not implemented");

}

void DrawPixmap(std::shared_ptr<const Pixmap> pm,

const Vector &o, const Vector &u, const Vector &v,

const Point2d &ta, const Point2d &tb, hFill hcf) override {

ssassert(false, "Not implemented");

}

void InvalidatePixmap(std::shared_ptr<const Pixmap> pm) override {

ssassert(false, "Not implemented");

}

SEdgeList edges = {};

SBezierList beziers = {};

VectorFileWriter *out = VectorFileWriter::ForFile(filename);

if(!out) return;

SS.exportMode = true;

GenerateAll(Generate::ALL);

SMesh *sm = NULL;

if(SS.GW.showShaded || SS.GW.drawOccludedAs != GraphicsWindow::DrawOccludedAs::VISIBLE) {

Group *g = SK.GetGroup(SS.GW.activeGroup);

g->GenerateDisplayItems();

sm = &(g->displayMesh);

}

if(sm && sm->IsEmpty()) {

sm = NULL;

}

for(auto &entity : SK.entity) {

Entity *e = &entity;

if(!e->IsVisible()) continue;

if(e->construction) continue;

if(SS.exportPwlCurves || sm || fabs(SS.exportOffset) > LENGTH_EPS)

{

// We will be doing hidden line removal, which we can't do on

// exact curves; so we need things broken down to pwls. Same

// problem with cutter radius compensation.

e->GenerateEdges(&edges);

} else {

e->GenerateBezierCurves(&beziers);

}

}

if(SS.GW.showEdges || SS.GW.showOutlines) {

Group *g = SK.GetGroup(SS.GW.activeGroup);

g->GenerateDisplayItems();

if(SS.GW.showEdges) {

g->displayOutlines.ListTaggedInto(&edges, Style::SOLID_EDGE);

}

}

if(SS.GW.showConstraints) {

if(!out->OutputConstraints(&SK.constraint)) {

GetEdgesCanvas canvas = {};

canvas.camera = SS.GW.GetCamera();

canvas.edges = &edges;

// The output format cannot represent constraints directly,

// so convert them to edges.

for(Constraint &c : SK.constraint) {

c.Draw(Constraint::DrawAs::DEFAULT, &canvas);

}

canvas.Clear();

}

}

if(exportWireframe) {

Vector u = Vector::From(1.0, 0.0, 0.0),

v = Vector::From(0.0, 1.0, 0.0),

n = Vector::From(0.0, 0.0, 1.0),

origin = Vector::From(0.0, 0.0, 0.0);

double cameraTan = 0.0,

scale = 1.0;

out->SetModelviewProjection(u, v, n, origin, cameraTan, scale);

ExportWireframeCurves(&edges, &beziers, out);

} else {

Vector u = SS.GW.projRight,

v = SS.GW.projUp,

n = u.Cross(v),

origin = SS.GW.offset.ScaledBy(-1);

out->SetModelviewProjection(u, v, n, origin,

SS.CameraTangent()*SS.GW.scale, SS.exportScale);

ExportLinesAndMesh(&edges, &beziers, sm,

u, v, n, origin, SS.CameraTangent()*SS.GW.scale,

out);

if(!out->HasCanvasSize()) {

// These file formats don't have a canvas size, so they just

// get exported in the raw coordinate system. So indicate what

// that was on-screen.

SS.justExportedInfo.showOrigin = true;

SS.justExportedInfo.pt = origin;

SS.justExportedInfo.u = u;

SS.justExportedInfo.v = v;

} else {

SS.justExportedInfo.showOrigin = false;

}

SS.justExportedInfo.draw = true;

GW.Invalidate();

}

edges.Clear();

beziers.Clear();

VectorFileWriter *out)

{

SBezierLoopSetSet sblss = {};

SEdge *se;

for(se = sel->l.First(); se; se = sel->l.NextAfter(se)) {

SBezier sb = SBezier::From(

(se->a).ScaledBy(1.0 / SS.exportScale),

(se->b).ScaledBy(1.0 / SS.exportScale));

sblss.AddOpenPath(&sb);

}

sbl->ScaleSelfBy(1.0/SS.exportScale);

SBezier *sb;

for(sb = sbl->l.First(); sb; sb = sbl->l.NextAfter(sb)) {

sblss.AddOpenPath(sb);

}

out->OutputLinesAndMesh(&sblss, NULL);

sblss.Clear();

Vector u, Vector v, Vector n,

Vector origin, double cameraTan,

VectorFileWriter *out)

{

double s = 1.0 / SS.exportScale;

// Project into the export plane; so when we're done, z doesn't matter,

// and x and y are what goes in the DXF.

for(SEdge *e = sel->l.First(); e; e = sel->l.NextAfter(e)) {

// project into the specified csys, and apply export scale

(e->a) = e->a.InPerspective(u, v, n, origin, cameraTan).ScaledBy(s);

(e->b) = e->b.InPerspective(u, v, n, origin, cameraTan).ScaledBy(s);

}

if(sbl) {

for(SBezier *b = sbl->l.First(); b; b = sbl->l.NextAfter(b)) {

*b = b->InPerspective(u, v, n, origin, cameraTan);

int i;

for(i = 0; i <= b->deg; i++) {

b->ctrl[i] = (b->ctrl[i]).ScaledBy(s);

}

}

}

// If cutter radius compensation is requested, then perform it now

if(fabs(SS.exportOffset) > LENGTH_EPS) {

// assemble those edges into a polygon, and clear the edge list

SPolygon sp = {};

sel->AssemblePolygon(&sp, NULL);

sel->Clear();

SPolygon compd = {};

sp.normal = Vector::From(0, 0, -1);

sp.FixContourDirections();

sp.OffsetInto(&compd, SS.exportOffset*s);

sp.Clear();

compd.MakeEdgesInto(sel);

compd.Clear();

}

// Now the triangle mesh; project, then build a BSP to perform

// occlusion testing and generated the shaded surfaces.

SMesh smp = {};

if(sm) {

Vector l0 = (SS.lightDir[0]).WithMagnitude(1),

l1 = (SS.lightDir[1]).WithMagnitude(1);

STriangle *tr;

for(tr = sm->l.First(); tr; tr = sm->l.NextAfter(tr)) {

STriangle tt = *tr;

tt.a = (tt.a).InPerspective(u, v, n, origin, cameraTan).ScaledBy(s);

tt.b = (tt.b).InPerspective(u, v, n, origin, cameraTan).ScaledBy(s);

tt.c = (tt.c).InPerspective(u, v, n, origin, cameraTan).ScaledBy(s);

// And calculate lighting for the triangle

Vector n = tt.Normal().WithMagnitude(1);

double lighting = SS.ambientIntensity +

max(0.0, (SS.lightIntensity[0])*(n.Dot(l0))) +

max(0.0, (SS.lightIntensity[1])*(n.Dot(l1)));

double r = min(1.0, tt.meta.color.redF() * lighting),

g = min(1.0, tt.meta.color.greenF() * lighting),

b = min(1.0, tt.meta.color.blueF() * lighting);

tt.meta.color = RGBf(r, g, b);

smp.AddTriangle(&tt);

}

}

SMesh sms = {};

// We need the mesh for occlusion testing, but if we don't/can't export it,

// don't generate it.

if(SS.GW.showShaded && out->CanOutputMesh()) {

// Use the BSP routines to generate the split triangles in paint order.

SBsp3 *bsp = SBsp3::FromMesh(&smp);

if(bsp) bsp->GenerateInPaintOrder(&sms);

// And cull the back-facing triangles

STriangle *tr;

sms.l.ClearTags();

for(tr = sms.l.First(); tr; tr = sms.l.NextAfter(tr)) {

Vector n = tr->Normal();

if(n.z < 0) {

tr->tag = 1;

}

}

sms.l.RemoveTagged();

}

// And now we perform hidden line removal if requested

SEdgeList hlrd = {};

if(sm) {

SKdNode *root = SKdNode::From(&smp);

// Generate the edges where a curved surface turns from front-facing

// to back-facing.

if(SS.GW.showEdges || SS.GW.showOutlines) {

root->MakeCertainEdgesInto(sel, EdgeKind::TURNING,

/*coplanarIsInter=*/false, NULL, NULL,

GW.showOutlines ? Style::OUTLINE : Style::SOLID_EDGE);

}

root->ClearTags();

int cnt = 1234;

SEdge *se;

for(se = sel->l.First(); se; se = sel->l.NextAfter(se)) {

if(se->auxA == Style::CONSTRAINT) {

// Constraints should not get hidden line removed; they're

// always on top.

hlrd.AddEdge(se->a, se->b, se->auxA);

continue;

}

SEdgeList edges = {};

// Split the original edge against the mesh

edges.AddEdge(se->a, se->b, se->auxA);

root->OcclusionTestLine(*se, &edges, cnt);

if(SS.GW.drawOccludedAs == GraphicsWindow::DrawOccludedAs::STIPPLED) {

for(SEdge &se : edges.l) {

if(se.tag == 1) {

se.auxA = Style::HIDDEN_EDGE;

}

}

} else if(SS.GW.drawOccludedAs == GraphicsWindow::DrawOccludedAs::INVISIBLE) {

edges.l.RemoveTagged();

}

// the occlusion test splits unnecessarily; so fix those

edges.MergeCollinearSegments(se->a, se->b);

cnt++;

// And add the results to our output

SEdge *sen;

for(sen = edges.l.First(); sen; sen = edges.l.NextAfter(sen)) {

hlrd.AddEdge(sen->a, sen->b, sen->auxA);

}

edges.Clear();

}

sel = &hlrd;

}

// Clean up: remove overlapping line segments and

// segments with zero-length projections.

sel->l.ClearTags();

for(int i = 0; i < sel->l.n; ++i) {

SEdge *sei = &sel->l[i];

hStyle hsi = { (uint32_t)sei->auxA };

Style *si = Style::Get(hsi);

if(sei->tag != 0) continue;

// Remove segments with zero length projections.

Vector ai = sei->a;

ai.z = 0.0;

Vector bi = sei->b;

bi.z = 0.0;

Vector di = bi.Minus(ai);

if(fabs(di.x) < LENGTH_EPS && fabs(di.y) < LENGTH_EPS) {

sei->tag = 1;

continue;

}

for(int j = i + 1; j < sel->l.n; ++j) {

SEdge *sej = &sel->l[j];

if(sej->tag != 0) continue;

Vector *pAj = &sej->a;

Vector *pBj = &sej->b;

// Remove segments with zero length projections.

Vector aj = sej->a;

aj.z = 0.0;

Vector bj = sej->b;

bj.z = 0.0;

Vector dj = bj.Minus(aj);

if(fabs(dj.x) < LENGTH_EPS && fabs(dj.y) < LENGTH_EPS) {

sej->tag = 1;

continue;

}

// Skip non-collinear segments.

const double eps = 1e-6;

if(aj.DistanceToLine(ai, di) > eps) continue;

if(bj.DistanceToLine(ai, di) > eps) continue;

double ta = aj.Minus(ai).Dot(di) / di.Dot(di);

double tb = bj.Minus(ai).Dot(di) / di.Dot(di);

if(ta > tb) {

std::swap(pAj, pBj);

std::swap(ta, tb);

}

hStyle hsj = { (uint32_t)sej->auxA };

Style *sj = Style::Get(hsj);

bool canRemoveI = sej->auxA == sei->auxA || si->zIndex < sj->zIndex;

bool canRemoveJ = sej->auxA == sei->auxA || sj->zIndex < si->zIndex;

if(canRemoveJ) {

// j-segment inside i-segment

if(ta > 0.0 - eps && tb < 1.0 + eps) {

sej->tag = 1;

continue;

}

// cut segment

bool aInside = ta > 0.0 - eps && ta < 1.0 + eps;

if(tb > 1.0 - eps && aInside) {

*pAj = sei->b;

continue;

}

// cut segment

bool bInside = tb > 0.0 - eps && tb < 1.0 + eps;

if(ta < 0.0 - eps && bInside) {

*pBj = sei->a;

continue;

}

// split segment

if(ta < 0.0 - eps && tb > 1.0 + eps) {

sel->AddEdge(sei->b, *pBj, sej->auxA, sej->auxB);

*pBj = sei->a;

continue;

}

}

if(canRemoveI) {

// j-segment inside i-segment

if(ta < 0.0 + eps && tb > 1.0 - eps) {

sei->tag = 1;

break;

}

// cut segment

bool aInside = ta > 0.0 + eps && ta < 1.0 - eps;

if(tb > 1.0 - eps && aInside) {

sei->b = *pAj;

i--;

break;

}

// cut segment

bool bInside = tb > 0.0 + eps && tb < 1.0 - eps;

if(ta < 0.0 + eps && bInside) {

sei->a = *pBj;

i--;

break;

}

// split segment

if(ta > 0.0 + eps && tb < 1.0 - eps) {

sel->AddEdge(*pBj, sei->b, sei->auxA, sei->auxB);

sei->b = *pAj;

i--;

break;

}

}

}

}

sel->l.RemoveTagged();

// We kept the line segments and Beziers separate until now; but put them

// all together, and also project everything into the xy plane, since not

// all export targets ignore the z component of the points.

ssassert(sbl != nullptr, "Adding line segments to beziers assumes bezier list is non-null.");

for(SEdge *e = sel->l.First(); e; e = sel->l.NextAfter(e)) {

SBezier sb = SBezier::From(e->a, e->b);

sb.auxA = e->auxA;

sbl->l.Add(&sb);

}

for(SBezier *b = sbl->l.First(); b; b = sbl->l.NextAfter(b)) {

for(int i = 0; i <= b->deg; i++) {

b->ctrl[i].z = 0;

}

}

// If possible, then we will assemble these output curves into loops. They

// will then get exported as closed paths.

SBezierLoopSetSet sblss = {};

SBezierLoopSet leftovers = {};

SSurface srf = SSurface::FromPlane(Vector::From(0, 0, 0),

Vector::From(1, 0, 0),

Vector::From(0, 1, 0));

SPolygon spxyz = {};

bool allClosed;

SEdge notClosedAt;

sbl->l.ClearTags();

sblss.FindOuterFacesFrom(sbl, &spxyz, &srf,

SS.ExportChordTolMm(),

&allClosed, &notClosedAt,

NULL, NULL,

&leftovers);

sblss.l.Add(&leftovers);

// Now write the lines and triangles to the output file

out->OutputLinesAndMesh(&sblss, &sms);

spxyz.Clear();

sblss.Clear();

smp.Clear();

sms.Clear();

hlrd.Clear();

const Vector &origin, double cameraTan,

double scale) {

this->u = u;

this->v = v;

this->n = n;

this->origin = origin;

this->cameraTan = cameraTan;

this->scale = scale;

STriangle *tr;

SBezier *b;

// First calculate the bounding box.

ptMin = Vector::From(VERY_POSITIVE, VERY_POSITIVE, VERY_POSITIVE);

ptMax = Vector::From(VERY_NEGATIVE, VERY_NEGATIVE, VERY_NEGATIVE);

if(sm) {

for(tr = sm->l.First(); tr; tr = sm->l.NextAfter(tr)) {

(tr->a).MakeMaxMin(&ptMax, &ptMin);

(tr->b).MakeMaxMin(&ptMax, &ptMin);

(tr->c).MakeMaxMin(&ptMax, &ptMin);

}

}

if(sblss) {

SBezierLoopSet *sbls;

for(sbls = sblss->l.First(); sbls; sbls = sblss->l.NextAfter(sbls)) {

SBezierLoop *sbl;

for(sbl = sbls->l.First(); sbl; sbl = sbls->l.NextAfter(sbl)) {

for(b = sbl->l.First(); b; b = sbl->l.NextAfter(b)) {

for(int i = 0; i <= b->deg; i++) {

(b->ctrl[i]).MakeMaxMin(&ptMax, &ptMin);

}

}

}

}

}

// And now we compute the canvas size.

double s = 1.0 / SS.exportScale;

if(SS.exportCanvasSizeAuto) {

// It's based on the calculated bounding box; we grow it along each

// boundary by the specified amount.

ptMin.x -= s*SS.exportMargin.left;

ptMax.x += s*SS.exportMargin.right;

ptMin.y -= s*SS.exportMargin.bottom;

ptMax.y += s*SS.exportMargin.top;

} else {

ptMin.x = -(s*SS.exportCanvas.dx);

ptMin.y = -(s*SS.exportCanvas.dy);

ptMax.x = ptMin.x + (s*SS.exportCanvas.width);

ptMax.y = ptMin.y + (s*SS.exportCanvas.height);

}

StartFile();

if(sm && SS.exportShadedTriangles) {

for(tr = sm->l.First(); tr; tr = sm->l.NextAfter(tr)) {

Triangle(tr);

}

}

if(sblss) {

SBezierLoopSet *sbls;

for(sbls = sblss->l.First(); sbls; sbls = sblss->l.NextAfter(sbls)) {

SBezierLoop *sbl;

sbl = sbls->l.First();

if(!sbl) continue;

b = sbl->l.First();

if(!b || !Style::Exportable(b->auxA)) continue;

hStyle hs = { (uint32_t)b->auxA };

Style *stl = Style::Get(hs);

double lineWidth = Style::WidthMm(b->auxA)*s;

RgbaColor strokeRgb = Style::Color(hs, /*forExport=*/true);

RgbaColor fillRgb = Style::FillColor(hs, /*forExport=*/true);

StartPath(strokeRgb, lineWidth, stl->filled, fillRgb, hs);

for(sbl = sbls->l.First(); sbl; sbl = sbls->l.NextAfter(sbl)) {

for(b = sbl->l.First(); b; b = sbl->l.NextAfter(b)) {

Bezier(b);

}

}

FinishPath(strokeRgb, lineWidth, stl->filled, fillRgb, hs);

}

}

FinishAndCloseFile();

List<Vector> lv = {};

sb->MakePwlInto(&lv, SS.ExportChordTolMm());

for(int i = 1; i < lv.n; i++) {

SBezier sb = SBezier::From(lv[i-1], lv[i]);

Bezier(&sb);

}

lv.Clear();

Vector t0 = sb->TangentAt(0), t1 = sb->TangentAt(1);

// The curve is correct, and the first derivatives are correct, at the

// endpoints.

SBezier bnr = SBezier::From(

sb->Start(),

sb->Start().Plus(t0.ScaledBy(1.0/3)),

sb->Finish().Minus(t1.ScaledBy(1.0/3)),

sb->Finish());

double tol = SS.ExportChordTolMm();

// Arbitrary choice, but make it a little finer than pwl tolerance since

// it should be easier to achieve that with the smooth curves.

tol /= 2;

bool closeEnough = true;

int i;

for(i = 1; i <= 3; i++) {

double t = i/4.0;

Vector p0 = sb->PointAt(t),

pn = bnr.PointAt(t);

double d = (p0.Minus(pn)).Magnitude();

if(d > tol) {

closeEnough = false;

}

}

if(closeEnough || depth > 3) {

Bezier(&bnr);

} else {

SBezier bef, aft;

sb->SplitAt(0.5, &bef, &aft);

BezierAsNonrationalCubic(&bef, depth+1);

BezierAsNonrationalCubic(&aft, depth+1);

}

SS.exportMode = true;

GenerateAll(Generate::ALL);

Group *g = SK.GetGroup(SS.GW.activeGroup);

g->GenerateDisplayItems();

SMesh *m = &(SK.GetGroup(SS.GW.activeGroup)->displayMesh);

if(m->IsEmpty()) {

Error(_("Active group mesh is empty; nothing to export."));

return;

}

FILE *f = OpenFile(filename, "wb");

if(!f) {

Error("Couldn't write to '%s'", filename.raw.c_str());

return;

}

ShowNakedEdges(/*reportOnlyWhenNotOkay=*/true);

if(filename.HasExtension("stl")) {

ExportMeshAsStlTo(f, m);

} else if(filename.HasExtension("obj")) {

Platform::Path mtlFilename = filename.WithExtension("mtl");

FILE *fMtl = OpenFile(mtlFilename, "wb");

if(!fMtl) {

Error("Couldn't write to '%s'", filename.raw.c_str());

return;

}

fprintf(f, "mtllib %s\n", mtlFilename.FileName().c_str());

ExportMeshAsObjTo(f, fMtl, m);

fclose(fMtl);

} else if(filename.HasExtension("q3do")) {

ExportMeshAsQ3doTo(f, m);

} else if(filename.HasExtension("js") ||

filename.HasExtension("html")) {

SOutlineList *e = &(SK.GetGroup(SS.GW.activeGroup)->displayOutlines);

ExportMeshAsThreeJsTo(f, filename, m, e);

} else if(filename.HasExtension("wrl")) {

ExportMeshAsVrmlTo(f, filename, m);

} else {

Error("Can't identify output file type from file extension of "

"filename '%s'; try .stl, .obj, .js, .html.", filename.raw.c_str());

}

fclose(f);

SS.justExportedInfo.showOrigin = false;

SS.justExportedInfo.draw = true;

GW.Invalidate();

char str[80] = {};

strcpy(str, "STL exported mesh");

fwrite(str, 1, 80, f);

uint32_t n = sm->l.n;

fwrite(&n, 4, 1, f);

double s = SS.exportScale;

int i;

for(i = 0; i < sm->l.n; i++) {

STriangle *tr = &(sm->l[i]);

Vector n = tr->Normal().WithMagnitude(1);

float w;

w = (float)n.x; fwrite(&w, 4, 1, f);

w = (float)n.y; fwrite(&w, 4, 1, f);

w = (float)n.z; fwrite(&w, 4, 1, f);

w = (float)((tr->a.x)/s); fwrite(&w, 4, 1, f);

w = (float)((tr->a.y)/s); fwrite(&w, 4, 1, f);

w = (float)((tr->a.z)/s); fwrite(&w, 4, 1, f);

w = (float)((tr->b.x)/s); fwrite(&w, 4, 1, f);

w = (float)((tr->b.y)/s); fwrite(&w, 4, 1, f);

w = (float)((tr->b.z)/s); fwrite(&w, 4, 1, f);

w = (float)((tr->c.x)/s); fwrite(&w, 4, 1, f);

w = (float)((tr->c.y)/s); fwrite(&w, 4, 1, f);

w = (float)((tr->c.z)/s); fwrite(&w, 4, 1, f);

fputc(0, f);

fputc(0, f);

}

flatbuffers::FlatBufferBuilder builder(1024);

double s = SS.exportScale;

// Create a material for every colour used, keep note of triangles belonging to color/material.

std::map<RgbaColor, flatbuffers::Offset<q3d::Material>, RgbaColorCompare> materials;

std::map<RgbaColor, std::vector<flatbuffers::Offset<q3d::Triangle>>, RgbaColorCompare> materialTriangles;

for (const STriangle &t : sm->l) {

auto color = t.meta.color;

if (materials.find(color) == materials.end()) {

auto name = builder.CreateString(ssprintf("Color #%02x%02x%02x%02x", color.red, color.green, color.blue, color.alpha));

auto co = q3d::CreateColor(builder, color.red, color.green, color.blue, color.alpha);

auto mo = q3d::CreateMaterial(builder, name, co);

materials.emplace(color, mo);

}

Vector faceNormal = t.Normal();

auto a = q3d::Vector3((float)(t.a.x/s), (float)(t.a.y/s), (float)(t.a.z/s));

auto b = q3d::Vector3((float)(t.b.x/s), (float)(t.b.y/s), (float)(t.b.z/s));

auto c = q3d::Vector3((float)(t.c.x/s), (float)(t.c.y/s), (float)(t.c.z/s));

auto fn = q3d::Vector3((float)faceNormal.x, (float)faceNormal.y, (float)faceNormal.x);

auto n1 = q3d::Vector3((float)t.normals[0].x, (float)t.normals[0].y, (float)t.normals[0].z);

auto n2 = q3d::Vector3((float)t.normals[1].x, (float)t.normals[1].y, (float)t.normals[1].z);

auto n3 = q3d::Vector3((float)t.normals[2].x, (float)t.normals[2].y, (float)t.normals[2].z);

auto tri = q3d::CreateTriangle(builder, &a, &b, &c, &fn, &n1, &n2, &n3);

materialTriangles[color].push_back(tri);

}

// Build all meshes sorted by material.

std::vector<flatbuffers::Offset<q3d::Mesh>> meshes;

for (auto &it : materials) {

auto &mato = it.second;

auto to = builder.CreateVector(materialTriangles[it.first]);

auto mo = q3d::CreateMesh(builder, to, mato);

meshes.push_back(mo);

}

auto mo = builder.CreateVector(meshes);

auto o = q3d::CreateObject(builder, mo);

q3d::FinishObjectBuffer(builder, o);

fwrite(builder.GetBufferPointer(), builder.GetSize(), 1, f);

std::map<RgbaColor, std::string, RgbaColorCompare> colors;

for(const STriangle &t : sm->l) {

RgbaColor color = t.meta.color;

if(colors.find(color) == colors.end()) {

std::string id = ssprintf("h%02x%02x%02x",

color.red,

color.green,

color.blue);

colors.emplace(color, id);

}

for(int i = 0; i < 3; i++) {

fprintf(fObj, "v %.10f %.10f %.10f\n",

CO(t.vertices[i].ScaledBy(1 / SS.exportScale)));

}

}

for(auto &it : colors) {

fprintf(fMtl, "newmtl %s\n",

it.second.c_str());

fprintf(fMtl, "Kd %.3f %.3f %.3f\n",

it.first.redF(), it.first.greenF(), it.first.blueF());

}

for(const STriangle &t : sm->l) {

for(int i = 0; i < 3; i++) {

Vector n = t.normals[i].WithMagnitude(1.0);

fprintf(fObj, "vn %.10f %.10f %.10f\n",

CO(n));

}

}

RgbaColor currentColor = {};

for(int i = 0; i < sm->l.n; i++) {

const STriangle &t = sm->l[i];

if(!currentColor.Equals(t.meta.color)) {

currentColor = t.meta.color;

fprintf(fObj, "usemtl %s\n", colors[currentColor].c_str());

}

fprintf(fObj, "f %d//%d %d//%d %d//%d\n",

i * 3 + 1, i * 3 + 1,

i * 3 + 2, i * 3 + 2,

i * 3 + 3, i * 3 + 3);

}