GitHub Viewer

/* DSC Keybus Interface Functions used by the KeybusReader sketch to decode and print Keybus data, with documentation of each message - including portions that are currently undecoded and unknown. Contributions to improve decoding are always welcome! https://github.com/taligentx/dscKeybusInterface panelData[] and moduleData[] store panel and keypad/module data in an array: command [0], stop bit by itself [1], followed by the remaining data. panelData[] example: Byte 0 Byte 2 Byte 3 Byte 4 Byte 5 00000101 0 10000001 00000001 10010001 11000111 [0x05] Partition 1: Ready Backlight - Partition ready | Partition 2: disabled ^Byte 1 (stop bit) ^Bit 7 ^Bit 0 This library is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version. This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see . */ #include "dscKeybus.h" /* * printPanelMessage() checks the first byte of a message from the * panel (panelData[0]) to process known commands. * * Structure decoding status refers to whether all bits of the message have * a known purpose. * * Content decoding status refers to whether all values of the message are known. */ void dscKeybusInterface::printPanelMessage() { // Checks for errors on panel commands with CRC data switch (panelData[0]) { case 0x05: // Skips panel commands without CRC data case 0x11: case 0x1B: case 0x1C: case 0x22: case 0x28: case 0x33: case 0x39: case 0x41: case 0x4C: case 0x57: case 0x58: case 0x70: case 0x94: case 0x9E: case 0xD5: case 0xE6: break; // 0xE6 is checked separately as only some of its subcommands use CRC default: { // Checks remaining panel commands if (!validCRC()) { stream->print(F("[CRC Error]")); return; } } } // Processes known panel commands from the first byte of the panel message: panelData[0] switch (panelData[0]) { case 0x05: printPanel_0x05(); return; // Panel status: partitions 1-4 | Structure: complete | Content: *incomplete case 0x0A: case 0x0F: printPanel_0x0A_0F(); return; // Panel status in alarm/programming, partitions 1-2 | Structure: complete | Content: *incomplete case 0x11: printPanel_0x11(); return; // Module supervision query | Structure: complete | Content: complete case 0x16: printPanel_0x16(); return; // Panel configuration | Structure: *incomplete | Content: *incomplete case 0x1B: printPanel_0x1B(); return; // Panel status: partitions 5-8 | Structure: complete | Content: *incomplete case 0x1C: printPanel_0x1C(); return; // Verify keypad Fire/Auxiliary/Panic | Structure: complete | Content: complete case 0x22: case 0x28: case 0x33: case 0x39: printPanel_0x22_28_33_39(); return; // Zone expanders 0-3 query | Structure: complete | Content: complete case 0x27: printPanel_0x27(); return; // Panel status and zones 1-8 status | Structure: complete | Content: *incomplete case 0x2D: printPanel_0x2D(); return; // Panel status and zones 9-16 status | Structure: complete | Content: *incomplete case 0x34: printPanel_0x34(); return; // Panel status and zones 17-24 status | Structure: complete | Content: *incomplete case 0x3E: printPanel_0x3E(); return; // Panel status and zones 25-32 status | Structure: complete | Content: *incomplete case 0x41: printPanel_0x41(); return; // Wireless module query | Structure: complete | Content: complete case 0x4C: printPanel_0x4C(); return; // Module tamper query | Structure: complete | Content: *incomplete case 0x57: printPanel_0x57(); return; // Wireless key query | Structure: complete | Content: *incomplete case 0x58: printPanel_0x58(); return; // Module status query | Structure: complete | Content: *incomplete case 0x5D: case 0x63: printPanel_0x5D_63(); return; // Flash panel lights: status and zones 1-32, partitions 1-2 | Structure: complete | Content: complete case 0x64: printPanel_0x64(); return; // Beep, partition 1 | Structure: complete | Content: complete case 0x69: printPanel_0x69(); return; // Beep, partition 2 | Structure: complete | Content: complete case 0x6E: printPanel_0x6E(); return; // LCD keypad display | Structure: complete | Content: complete case 0x70: printPanel_0x70(); return; // LCD keypad data query | Structure: complete | Content: complete case 0x75: printPanel_0x75(); return; // Tone, partition 1 | Structure: complete | Content: complete case 0x7A: printPanel_0x7A(); return; // Tone, partition 2 | Structure: complete | Content: complete case 0x7F: printPanel_0x7F(); return; // Buzzer, partition 1 | Structure: complete | Content: complete case 0x82: printPanel_0x82(); return; // Buzzer, partition 2 | Structure: complete | Content: complete case 0x87: printPanel_0x87(); return; // PGM outputs | Structure: complete | Content: complete case 0x8D: printPanel_0x8D(); return; // RF module programming - it sends data from panel to RF module after programming entry is done | Structure: *incomplete | Content: *incomplete case 0x94: printPanel_0x94(); return; // Requesting and getting data from RF module to the panel | Structure: *incomplete | Content: *incomplete case 0x9E: printPanel_0x9E(); return; // DLS query | Structure: complete | Content: complete case 0xA5: printPanel_0xA5(); return; // Date, time, system status messages - partitions 1-2 | Structure: *incomplete | Content: *incomplete case 0xAA: printPanel_0xAA(); return; // Event buffer messages | Structure: complete | Content: *incomplete case 0xB1: printPanel_0xB1(); return; // Enabled zones 1-32 | Structure: complete | Content: complete case 0xBB: printPanel_0xBB(); return; // Bell | Structure: *incomplete | Content: *incomplete case 0xC3: printPanel_0xC3(); return; // Keypad and dialer status | Structure: *incomplete | Content: *incomplete case 0xCE: printPanel_0xCE(); return; // Panel status | Structure: *incomplete | Content: *incomplete case 0xD5: printPanel_0xD5(); return; // Keypad zone query | Structure: complete | Content: complete case 0xE6: printPanel_0xE6(); return; // Extended status command split into multiple subcommands to handle up to 8 partitions/64 zones | Structure: *incomplete | Content: *incomplete case 0xEB: printPanel_0xEB(); return; // Date, time, system status messages - partitions 1-8 | Structure: *incomplete | Content: *incomplete case 0xEC: printPanel_0xEC(); return; // Event buffer messages | Structure: *incomplete | Content: *incomplete default: { stream->print("Unknown data"); return; } } } // Processes keypad and module notifications and responses to panel queries void dscKeybusInterface::printModuleMessage() { switch (moduleData[0]) { case 0xBB: printModule_0xBB(); return; // Keypad fire alarm | Structure: complete | Content: complete case 0xDD: printModule_0xDD(); return; // Keypad auxiliary alarm | Structure: complete | Content: complete case 0xEE: printModule_0xEE(); return; // Keypad panic alarm | Structure: complete | Content: complete } stream->print(F("[Module/0x")); if (moduleCmd < 16) stream->print("0"); stream->print(moduleCmd, HEX); if (moduleCmd == 0xE6) { stream->print("."); if (moduleSubCmd < 16) stream->print("0"); stream->print(moduleSubCmd, HEX); } stream->print(F("] ")); // Keypad and module responses to panel queries switch (moduleCmd) { case 0x05: case 0x0A: case 0x0F: case 0x1B: case 0x27: case 0x2D: case 0x3E: printModule_Status(); return; // Module notifications sent during panel status commands | Structure: *incomplete | Content: *incomplete case 0x11: printModule_0x11(); return; // Module supervision query response | Structure: *incomplete | Content: *incomplete case 0x41: printModule_0x41(); return; // Wireless module query response | Structure: *incomplete | Content: *incomplete case 0x4C: printModule_0x4C(); return; // Module tamper query response | Structure: *incomplete | Content: *incomplete case 0x57: printModule_0x57(); return; // Wireless key query response | Structure: *incomplete | Content: *incomplete case 0x58: printModule_0x58(); return; // Module status query response | Structure: *incomplete | Content: *incomplete case 0x70: printModule_0x70(); return; // LCD keypad data entry | Structure: complete | Content: complete case 0x94: printModule_0x94(); return; // Module programming response | Structure: *incomplete | Content: *incomplete case 0xD5: printModule_0xD5(); return; // Keypad zone query response | Structure: *incomplete | Content: *incomplete case 0x22: case 0x28: case 0x33: case 0x39: printModule_Expander(); return; // Zone expanders 1-3 response case 0xE6: { switch (moduleSubCmd) { case 0x01: case 0x02: case 0x03: case 0x04: case 0x05: case 0x06: case 0x20: case 0x21: printModule_Status(); return; // Module notifications sent during installer programming case 0x08: case 0x0A: case 0x0C: case 0x0E: printModule_Expander(); return; // Zone expanders 4-7 response } } default: stream->print("Unknown data"); } } /* * Keypad status lights for panel commands: 0x05, 0x0A, 0x1B, 0x27, 0x2D, 0x34, 0x3E, 0x5D * Structure decoding: complete * Content decoding: complete * * This decodes the following byte as a status message by default. */ void dscKeybusInterface::printPanelLights(byte panelByte, bool printMessage) { if (panelData[panelByte] == 0) stream->print(F("none ")); else { if (bitRead(panelData[panelByte], 0)) stream->print(F("Ready ")); if (bitRead(panelData[panelByte], 1)) stream->print(F("Armed ")); if (bitRead(panelData[panelByte], 2)) stream->print(F("Memory ")); if (bitRead(panelData[panelByte], 3)) stream->print(F("Bypass ")); if (bitRead(panelData[panelByte], 4)) stream->print(F("Trouble ")); if (bitRead(panelData[panelByte], 5)) stream->print(F("Program ")); if (bitRead(panelData[panelByte], 6)) stream->print(F("Fire ")); if (bitRead(panelData[panelByte], 7)) stream->print(F("Backlight ")); } if (printMessage) { stream->print(F("- ")); printPanelMessages(panelByte + 1); } } /* * Status messages for panel commands: 0x05, 0x0A, 0x1B, 0x27, 0x2D, 0x34, 0x3E * Structure decoding: complete * Content decoding: *incomplete */ void dscKeybusInterface::printPanelMessages(byte panelByte) { switch (panelData[panelByte]) { case 0x01: stream->print(F("Partition ready")); break; case 0x02: stream->print(F("Stay zones open")); break; case 0x03: stream->print(F("Zones open")); break; case 0x04: stream->print(F("Armed: Stay")); break; case 0x05: stream->print(F("Armed: Away")); break; case 0x06: stream->print(F("Armed: Stay with no entry delay")); break; case 0x07: stream->print(F("Failed to arm")); break; case 0x08: stream->print(F("Exit delay in progress")); break; case 0x09: stream->print(F("Arming: No entry delay")); break; case 0x0B: stream->print(F("Quick exit in progress")); break; case 0x0C: stream->print(F("Entry delay in progress")); break; case 0x0D: stream->print(F("Entry delay after alarm")); break; case 0x0E: stream->print(F("Function not available")); break; case 0x10: stream->print(F("Keypad lockout")); break; case 0x11: stream->print(F("Partition in alarm")); break; case 0x12: stream->print(F("Battery check in progress")); break; case 0x14: stream->print(F("Auto-arm in progress")); break; case 0x15: stream->print(F("Arming with bypassed zones")); break; case 0x16: stream->print(F("Armed: Away with no entry delay")); break; case 0x19: stream->print(F("Disarmed: Alarm memory")); break; case 0x22: stream->print(F("Disarmed: Recent closing")); break; case 0x2F: stream->print(F("Keypad LCD test")); break; case 0x33: stream->print(F("Command output in progress")); break; case 0x3D: stream->print(F("Disarmed: Alarm memory")); break; case 0x3E: stream->print(F("Partition disarmed")); break; case 0x17: // Keypad blanking with trouble light flashing case 0x40: stream->print(F("Keypad blanking")); break; case 0x8A: stream->print(F("Activate stay/away zones")); break; case 0x8B: stream->print(F("Quick exit")); break; case 0x8E: stream->print(F("Function not available")); break; case 0x8F: stream->print(F("Invalid access code")); break; case 0x9E: stream->print(F("Enter * function key")); break; case 0x9F: stream->print(F("Enter access code")); break; case 0xA0: stream->print(F("*1: Zone bypass")); break; case 0xA1: stream->print(F("*2: Trouble")); break; case 0xA2: stream->print(F("*3: Alarm memory")); break; case 0xA3: stream->print(F("Door chime enabled")); break; case 0xA4: stream->print(F("Door chime disabled")); break; case 0xA5: stream->print(F("Enter master code")); break; case 0xA6: stream->print(F("*5: Access codes")); break; case 0xA7: stream->print(F("*5: Enter 4-digit code")); break; case 0xA9: stream->print(F("*6: User functions")); break; case 0xAA: stream->print(F("*6: Time and date")); break; case 0xAB: stream->print(F("*6: Auto-arm time")); break; case 0xAC: stream->print(F("*6: Auto-arm enabled")); break; case 0xAD: stream->print(F("*6: Auto-arm disabled")); break; case 0xAF: stream->print(F("*6: System test")); break; case 0xB0: stream->print(F("*6: Enable DLS")); break; case 0xB2: case 0xB3: stream->print(F("*7: Command output")); break; case 0xB7: stream->print(F("Enter installer code")); break; case 0xB8: stream->print(F("Enter * function key while armed")); break; case 0xB9: stream->print(F("*2: Zone tamper menu")); break; case 0xBA: stream->print(F("*2: Zones with low batteries")); break; case 0xBC: stream->print(F("*5: Enter 6-digit code")); break; case 0xBF: stream->print(F("*6: Auto-arm select day")); break; case 0xC6: stream->print(F("*2: Zone fault menu")); break; //case 0xC7: stream->print(F("Partition not available")); break; case 0xC8: stream->print(F("*2: Service required menu")); break; case 0xCD: stream->print(F("Downloading in progress")); break; case 0xCE: stream->print(F("Active camera monitor selection")); break; case 0xD0: stream->print(F("*2: Keypads with low batteries")); break; case 0xD1: stream->print(F("*2: Keyfobs with low batteries")); break; case 0xD4: stream->print(F("*2: Zones with RF Delinquency")); break; case 0xE4: stream->print(F("*8: Installer programming, 3 digits")); decimalInput = false; break; case 0xE5: stream->print(F("Keypad slot assignment")); break; case 0xE6: stream->print(F("Input: 2 digits")); break; case 0xE7: stream->print(F("Input: 3 digits")); decimalInput = true; break; case 0xE8: stream->print(F("Input: 4 digits")); break; case 0xE9: stream->print(F("Input: 5 digits")); break; case 0xEA: stream->print(F("Input HEX: 2 digits")); break; case 0xEB: stream->print(F("Input HEX: 4 digits")); break; case 0xEC: stream->print(F("Input HEX: 6 digits")); break; case 0xED: stream->print(F("Input HEX: 32 digits")); break; case 0xEE: stream->print(F("Input: 1 option per zone")); break; case 0xEF: stream->print(F("Module supervision field")); break; case 0xF0: stream->print(F("Function key 1")); break; case 0xF1: stream->print(F("Function key 2")); break; case 0xF2: stream->print(F("Function key 3")); break; case 0xF3: stream->print(F("Function key 4")); break; case 0xF4: stream->print(F("Function key 5")); break; case 0xF5: stream->print(F("Wireless module placement test")); break; case 0xF6: stream->print(F("Activate device for test")); break; case 0xF7: stream->print(F("*8: Installer programming, 2 digits")); decimalInput = false; break; case 0xF8: stream->print(F("Keypad programming")); break; case 0xFA: stream->print(F("Input: 6 digits")); break; default: stream->print(F("Unknown data: 0x")); if (panelData[panelByte] < 10) stream->print("0"); stream->print(panelData[panelByte], HEX); break; } } /* * Status messages set 0x00 for panel commands: 0xA5, 0xAA, 0xCE, 0xEB, 0xEC * Structure decoding: complete * Content decoding: likely incomplete - observed messages from logs have been decoded, but there are gaps in the numerical list of messages. * * These commands use 1 byte for the status message, and appear to use bits 0,1 of the preceding byte to * select from multiple sets of status messages, split into printPanelStatus0...printPanelStatus2. */ void dscKeybusInterface::printPanelStatus0(byte panelByte) { bool decoded = true; switch (panelData[panelByte]) { /* * Command YYY1YYY2 MMMMDD DDDHHHHH MMMMMM Status CRC * 10100101 0 00011000 01001111 10110000 11101100 01001001 11111111 11110000 [0xA5] 2018.03.29 16:59 | Partition 1 | Duress alarm * 10100101 0 00011000 01001111 11001110 10111100 01001010 11111111 11011111 [0xA5] 2018.03.30 14:47 | Partition 1 | Disarmed after alarm in memory * 10100101 0 00011000 01001111 11001010 01000100 01001011 11111111 01100100 [0xA5] 2018.03.30 10:17 | Partition 1 | Partition in alarm * 10100101 0 00011000 01010000 01001001 10111000 01001100 11111111 01011001 [0xA5] 2018.04.02 09:46 | Partition 1 | Zone expander supervisory alarm * 10100101 0 00011000 01010000 01001010 00000000 01001101 11111111 10100011 [0xA5] 2018.04.02 10:00 | Partition 1 | Zone expander supervisory restored * 10100101 0 00011000 01001111 01110010 10011100 01001110 11111111 01100111 [0xA5] 2018.03.27 18:39 | Partition 1 | Keypad Fire alarm * 10100101 0 00011000 01001111 01110010 10010000 01001111 11111111 01011100 [0xA5] 2018.03.27 18:36 | Partition 1 | Keypad Aux alarm * 10100101 0 00011000 01001111 01110010 10001000 01010000 11111111 01010101 [0xA5] 2018.03.27 18:34 | Partition 1 | Keypad Panic alarm * 10100101 0 00010110 00010111 11101101 00010000 01010000 10010001 10110000 [0xA5] 2016.05.31 13:04 | Keypad Panic alarm * 10100101 0 00010001 01101101 01100000 00000100 01010001 11111111 11010111 [0xA5] 2011.11.11 00:01 | Partition 1 | Auxiliary input alarm * 10100101 0 00011000 01001111 01110010 10011100 01010010 11111111 01101011 [0xA5] 2018.03.27 18:39 | Partition 1 | Keypad Fire alarm restored * 10100101 0 00011000 01001111 01110010 10010000 01010011 11111111 01100000 [0xA5] 2018.03.27 18:36 | Partition 1 | Keypad Aux alarm restored * 10100101 0 00011000 01001111 01110010 10001000 01010100 11111111 01011001 [0xA5] 2018.03.27 18:34 | Partition 1 | Keypad Panic alarm restored * 10100101 0 00011000 01001111 11110110 00110100 10011000 11111111 11001101 [0xA5] 2018.03.31 22:13 | Partition 1 | Keypad lockout * 10100101 0 00011000 01001111 11101011 10100100 10111110 11111111 01011000 [0xA5] 2018.03.31 11:41 | Partition 1 | Armed partial: Zones bypassed * 10100101 0 00011000 01001111 11101011 00011000 10111111 11111111 11001101 [0xA5] 2018.03.31 11:06 | Partition 1 | Armed special: quick-arm/auto-arm/keyswitch/wireless key/DLS * 10100101 0 00010001 01101101 01100000 00101000 11100101 11111111 10001111 [0xA5] 2011.11.11 00:10 | Partition 1 | Auto-arm cancelled * 10100101 0 00011000 01001111 11110111 01000000 11100110 11111111 00101000 [0xA5] 2018.03.31 23:16 | Partition 1 | Disarmed special: keyswitch/wireless key/DLS * 10100101 0 00011000 01001111 01101111 01011100 11100111 11111111 10111101 [0xA5] 2018.03.27 15:23 | Partition 1 | Panel battery trouble * 10100101 0 00011000 01001111 10110011 10011000 11101000 11111111 00111110 [0xA5] 2018.03.29 19:38 | Partition 1 | Panel AC power trouble * 10100101 0 00011000 01001111 01110100 01010000 11101001 11111111 10111000 [0xA5] 2018.03.27 20:20 | Partition 1 | Bell trouble * 10100101 0 00011000 01001111 11000000 10001000 11101100 11111111 00111111 [0xA5] 2018.03.30 00:34 | Partition 1 | Telephone line trouble * 10100101 0 00011000 01001111 01101111 01110000 11101111 11111111 11011001 [0xA5] 2018.03.27 15:28 | Partition 1 | Panel battery restored * 10100101 0 00011000 01010000 00100000 01011000 11110000 11111111 01110100 [0xA5] 2018.04.01 00:22 | Partition 1 | Panel AC power restored * 10100101 0 00011000 01001111 01110100 01011000 11110001 11111111 11001000 [0xA5] 2018.03.27 20:22 | Partition 1 | Bell restored * 10100101 0 00011000 01001111 11000000 10001000 11110100 11111111 01000111 [0xA5] 2018.03.30 00:34 | Partition 1 | Telephone line restored * 10100101 0 00011000 01001111 11100001 01011000 11111111 11111111 01000011 [0xA5] 2018.03.31 01:22 | Partition 1 | System test * Byte 0 1 2 3 4 5 6 7 8 */ // 0x09 - 0x28: Zone alarm, zones 1-32 // 0x29 - 0x48: Zone alarm restored, zones 1-32 case 0x49: stream->print(F("Duress alarm")); break; case 0x4A: stream->print(F("Disarmed: Alarm memory")); break; case 0x4B: stream->print(F("Recent closing alarm")); break; case 0x4C: stream->print(F("Zone expander supervisory alarm")); break; case 0x4D: stream->print(F("Zone expander supervisory restored")); break; case 0x4E: stream->print(F("Keypad Fire alarm")); break; case 0x4F: stream->print(F("Keypad Aux alarm")); break; case 0x50: stream->print(F("Keypad Panic alarm")); break; case 0x51: stream->print(F("PGM2 input alarm")); break; case 0x52: stream->print(F("Keypad Fire alarm restored")); break; case 0x53: stream->print(F("Keypad Aux alarm restored")); break; case 0x54: stream->print(F("Keypad Panic alarm restored")); break; case 0x55: stream->print(F("PGM2 input alarm restored")); break; // 0x56 - 0x75: Zone tamper, zones 1-32 // 0x76 - 0x95: Zone tamper restored, zones 1-32 case 0x98: stream->print(F("Keypad lockout")); break; // 0x99 - 0xBD: Armed: Access codes 1-34, 40-42 case 0xBE: stream->print(F("Armed: Partial")); break; case 0xBF: stream->print(F("Armed: Special")); break; // 0xC0 - 0xE4: Disarmed: Access codes 1-34, 40-42 case 0xE5: stream->print(F("Auto-arm cancelled")); break; case 0xE6: stream->print(F("Disarmed: Special")); break; case 0xE7: stream->print(F("Panel battery trouble")); break; case 0xE8: stream->print(F("Panel AC power trouble")); break; case 0xE9: stream->print(F("Bell trouble")); break; case 0xEA: stream->print(F("Fire zone trouble")); break; case 0xEB: stream->print(F("Panel aux supply trouble")); break; case 0xEC: stream->print(F("Telephone line trouble")); break; case 0xEF: stream->print(F("Panel battery restored")); break; case 0xF0: stream->print(F("Panel AC power restored")); break; case 0xF1: stream->print(F("Bell restored")); break; case 0xF2: stream->print(F("Fire zone trouble restored")); break; case 0xF3: stream->print(F("Panel aux supply restored")); break; case 0xF4: stream->print(F("Telephone line restored")); break; case 0xF7: stream->print(F("Phone 1 FTC")); break; case 0xF8: stream->print(F("Phone 2 FTC")); break; case 0xF9: stream->print(F("Event buffer threshold")); break; //75% full since last DLS upload case 0xFA: stream->print(F("DLS lead-in")); break; case 0xFB: stream->print(F("DLS lead-out")); break; case 0xFE: stream->print(F("Periodic test transmission")); break; case 0xFF: stream->print(F("System test")); break; default: decoded = false; } if (decoded) return; /* * Zone alarm, zones 1-32 * * Command YYY1YYY2 MMMMDD DDDHHHHH MMMMMM Status CRC * 10100101 0 00011000 01001111 01001001 11011000 00001001 11111111 00110101 [0xA5] 2018.03.26 09:54 | Partition 1 | Zone alarm: 1 * 10100101 0 00011000 01001111 01001010 00100000 00001110 11111111 10000011 [0xA5] 2018.03.26 10:08 | Partition 1 | Zone alarm: 6 * 10100101 0 00011000 01001111 10010100 11001000 00010000 11111111 01110111 [0xA5] 2018.03.28 20:50 | Partition 1 | Zone alarm: 8 * Byte 0 1 2 3 4 5 6 7 8 */ if (panelData[panelByte] >= 0x09 && panelData[panelByte] print("Zone alarm: "); printNumberOffset(panelByte, -8); return; } /* * Zone alarm restored, zones 1-32 * * Command YYY1YYY2 MMMMDD DDDHHHHH MMMMMM Status CRC * 10100101 0 00011000 01001111 10010100 11001100 00101001 11111111 10010100 [0xA5] 2018.03.28 20:51 | Partition 1 | Zone alarm restored: 1 * 10100101 0 00011000 01001111 10010100 11010100 00101110 11111111 10100001 [0xA5] 2018.03.28 20:53 | Partition 1 | Zone alarm restored: 6 * 10100101 0 00011000 01001111 10010100 11010000 00110000 11111111 10011111 [0xA5] 2018.03.28 20:52 | Partition 1 | Zone alarm restored: 8 * Byte 0 1 2 3 4 5 6 7 8 */ if (panelData[panelByte] >= 0x29 && panelData[panelByte] print("Zone alarm restored: "); printNumberOffset(panelByte, -40); return; } /* * Zone tamper, zones 1-32 * * Command YYY1YYY2 MMMMDD DDDHHHHH MMMMMM Status CRC * 10100101 0 00000001 01000100 00100010 01011100 01010110 11111111 10111101 [0xA5] 2001.01.01 02:23 | Partition 1 | Zone tamper: 1 * 10100101 0 00010001 01101101 01101011 10010000 01011011 11111111 01111000 [0xA5] 2011.11.11 11:36 | Partition 1 | Zone tamper: 6 * 11101011 0 10000000 00100000 00101010 00010111 11010000 00000000 01010111 11111111 11110010 [0xEB] 2020.10.16 23:52 | Partition 8 | Zone tamper: 2 * Byte 0 1 2 3 4 5 6 7 8 9 10 */ if (panelData[panelByte] >= 0x56 && panelData[panelByte] print("Zone tamper: "); printNumberOffset(panelByte, -85); return; } /* * Zone tamper restored, zones 1-32 * * Command YYY1YYY2 MMMMDD DDDHHHHH MMMMMM Status CRC * 10100101 0 00000001 01000100 00100010 01011100 01110110 11111111 11011101 [0xA5] 2001.01.01 02:23 | Partition 1 | Zone tamper restored: 1 * 10100101 0 00010001 01101101 01101011 10010000 01111011 11111111 10011000 [0xA5] 2011.11.11 11:36 | Partition 1 | Zone tamper restored: 6 * Byte 0 1 2 3 4 5 6 7 8 */ if (panelData[panelByte] >= 0x76 && panelData[panelByte] print("Zone tamper restored: "); printNumberOffset(panelByte, -117); return; } /* * Armed by access codes 1-34, 40-42 * * Command YYY1YYY2 MMMMDD DDDHHHHH MMMMMM Status CRC * 10100101 0 00011000 01001101 00001000 10010000 10011001 11111111 00111010 [0xA5] 2018.03.08 08:36 | Partition 1 | Armed: User code 1 * 10100101 0 00011000 01001101 00001000 10111100 10111011 11111111 10001000 [0xA5] 2018.03.08 08:47 | Partition 1 | Armed: Master code 40 * Byte 0 1 2 3 4 5 6 7 8 */ if (panelData[panelByte] >= 0x99 && panelData[panelByte] print(F("Armed: ")); printPanelAccessCode(dscCode); return; } /* * Disarmed by access codes 1-34, 40-42 * * Command YYY1YYY2 MMMMDD DDDHHHHH MMMMMM Status CRC * 10100101 0 00011000 01001101 00001000 11101100 11000000 11111111 10111101 [0xA5] 2018.03.08 08:59 | Partition 1 | Disarmed: User code 1 * 10100101 0 00011000 01001101 00001000 10110100 11100010 11111111 10100111 [0xA5] 2018.03.08 08:45 | Partition 1 | Disarmed: Master code 40 * Byte 0 1 2 3 4 5 6 7 8 */ if (panelData[panelByte] >= 0xC0 && panelData[panelByte] print(F("Disarmed: ")); printPanelAccessCode(dscCode); return; } stream->print("Unknown data"); } /* * Status messages set 0x01 for panel commands: 0xA5, 0xAA, 0xCE, 0xEB, 0xEC * Structure decoding: complete * Content decoding: likely incomplete - observed messages from logs have been decoded, but there are gaps in * the numerical list of messages. * * These commands use 1 byte for the status message, and appear to use bits 0,1 of the preceding byte to * select from multiple sets of status messages, split into printPanelStatus0...printPanelStatus3. */ void dscKeybusInterface::printPanelStatus1(byte panelByte) { switch (panelData[panelByte]) { /* * Command YYY1YYY2 MMMMDD DDDHHHHH MMMMMM Status CRC * 10100101 0 00011000 01001111 11001010 10001001 00000011 11111111 01100001 [0xA5] 2018.03.30 10:34 | Partition 1 | Cross zone alarm * 10100101 0 00010001 01101101 01101010 00000001 00000100 11111111 10010001 [0xA5] 2011.11.11 10:00 | Partition 1 | Delinquency alarm * 10100101 0 00010001 01101101 01100000 10101001 00100100 00000000 01010000 [0xA5] 2011.11.11 00:42 | Partition 1 | Duress code 33 * 10100101 0 00010001 01101101 01100000 10110101 00100101 00000000 01011101 [0xA5] 2011.11.11 00:45 | Partition 1 | Duress code 34 * 10100101 0 00010001 01101101 01100000 00101001 00100110 00000000 11010010 [0xA5] 2011.11.11 00:10 | Partition 1 | Master code 40 * 10100101 0 00010001 01101101 01100000 10010001 00100111 00000000 00111011 [0xA5] 2011.11.11 00:36 | Partition 1 | Supervisor code 41 * 10100101 0 00010001 01101101 01100000 10111001 00101000 00000000 01100100 [0xA5] 2011.11.11 00:46 | Partition 1 | Supervisor code 42 * 10100101 0 00011000 01001111 10100000 10011101 00101011 00000000 01110100 [0xA5] 2018.03.29 00:39 | Partition 1 | Armed: Auto-arm * 10100101 0 00011000 01001101 00001010 00001101 10101100 00000000 11001101 [0xA5] 2018.03.08 10:03 | Partition 1 | Exit *8 programming * 10100101 0 00011000 01001101 00001001 11100001 10101101 00000000 10100001 [0xA5] 2018.03.08 09:56 | Partition 1 | Enter *8 programming * 10100101 0 00010001 01101101 01100010 11001101 11010000 00000000 00100010 [0xA5] 2011.11.11 02:51 | Partition 1 | Command output 4 * 10100101 0 00010110 01010110 00101011 11010001 11010010 00000000 11011111 [0xA5] 2016.05.17 11:52 | Partition 1 | Armed with no entry delay cancelled * Byte 0 1 2 3 4 5 6 7 8 */ case 0x03: stream->print(F("Cross zone alarm")); return; case 0x04: stream->print(F("Delinquency alarm")); return; case 0x05: stream->print(F("Late to close")); return; // 0x24 - 0x28: Access codes 33-34, 40-42 case 0x29: stream->print(F("Downloading forced answer")); return; case 0x2B: stream->print(F("Armed: Auto-arm")); return; // 0x2C - 0x4B: Zone battery restored, zones 1-32 // 0x4C - 0x6B: Zone battery low, zones 1-32 // 0x6C - 0x8B: Zone fault restored, zones 1-32 // 0x8C - 0xAB: Zone fault, zones 1-32 case 0xAC: stream->print(F("Exit installer programming")); return; case 0xAD: stream->print(F("Enter installer programming")); return; case 0xAE: stream->print(F("Walk test end")); return; case 0xAF: stream->print(F("Walk test begin")); return; // 0xB0 - 0xCF: Zones bypassed, zones 1-32 case 0xD0: stream->print(F("Command output 4")); return; case 0xD1: stream->print(F("Exit fault pre-alert")); return; case 0xD2: stream->print(F("Armed: Entry delay")); return; case 0xD3: stream->print(F("Downlook remote trigger")); return; } /* * Access codes 33-34, 40-42 * * Command YYY1YYY2 MMMMDD DDDHHHHH MMMMMM Status CRC * 10100101 0 00010001 01101101 01100000 10101001 00100100 00000000 01010000 [0xA5] 2011.11.11 00:42 | Partition 1 | Duress code 33 * 10100101 0 00010001 01101101 01100000 10110101 00100101 00000000 01011101 [0xA5] 2011.11.11 00:45 | Partition 1 | Duress code 34 * 10100101 0 00010001 01101101 01100000 00101001 00100110 00000000 11010010 [0xA5] 2011.11.11 00:10 | Partition 1 | Master code 40 * 10100101 0 00010001 01101101 01100000 10010001 00100111 00000000 00111011 [0xA5] 2011.11.11 00:36 | Partition 1 | Supervisor code 41 * 10100101 0 00010001 01101101 01100000 10111001 00101000 00000000 01100100 [0xA5] 2011.11.11 00:46 | Partition 1 | Supervisor code 42 * Byte 0 1 2 3 4 5 6 7 8 */ if (panelData[panelByte] >= 0x24 && panelData[panelByte] = 0x2C && panelData[panelByte] print(F("Zone battery restored: ")); printNumberOffset(panelByte, -43); return; } /* * Zone low battery, zones 1-32 */ if (panelData[panelByte] >= 0x4C && panelData[panelByte] print(F("Zone battery low: ")); printNumberOffset(panelByte, -75); return; } /* * Zone fault restored, zones 1-32 * * Command YYY1YYY2 MMMMDD DDDHHHHH MMMMMM Status CRC * 10100101 0 00010001 01101101 01101011 01000001 01101100 11111111 00111010 [0xA5] 2011.11.11 11:16 | Partition 1 | Zone fault restored: 1 * 10100101 0 00010001 01101101 01101011 01010101 01101101 11111111 01001111 [0xA5] 2011.11.11 11:21 | Partition 1 | Zone fault restored: 2 * 10100101 0 00010001 01101101 01101011 10000101 01101111 11111111 10000001 [0xA5] 2011.11.11 11:33 | Partition 1 | Zone fault restored: 4 * 10100101 0 00010001 01101101 01101011 10001001 01110000 11111111 10000110 [0xA5] 2011.11.11 11:34 | Partition 1 | Zone fault restored: 5 * Byte 0 1 2 3 4 5 6 7 8 */ if (panelData[panelByte] >= 0x6C && panelData[panelByte] print(F("Zone fault restored: ")); printNumberOffset(panelByte, -107); return; } /* * Zone fault, zones 1-32 * * Command YYY1YYY2 MMMMDD DDDHHHHH MMMMMM Status CRC * 10100101 0 00010001 01101101 01101011 00111101 10001100 11111111 01010110 [0xA5] 2011.11.11 11:15 | Partition 1 | Zone fault: 1 * 10100101 0 00010001 01101101 01101011 01010101 10001101 11111111 01101111 [0xA5] 2011.11.11 11:21 | Partition 1 | Zone fault: 2 * 10100101 0 00010001 01101101 01101011 10000001 10001111 11111111 10011101 [0xA5] 2011.11.11 11:32 | Partition 1 | Zone fault: 4 * 10100101 0 00010001 01101101 01101011 10001001 10010000 11111111 10100110 [0xA5] 2011.11.11 11:34 | Partition 1 | Zone fault: 5 * Byte 0 1 2 3 4 5 6 7 8 */ if (panelData[panelByte] >= 0x8C && panelData[panelByte] print(F("Zone fault: ")); printNumberOffset(panelByte, -139); return; } /* * Zones bypassed, zones 1-32 * * Command YYY1YYY2 MMMMDD DDDHHHHH MMMMMM Status CRC * 10100101 0 00011000 01001111 10110001 10101001 10110001 00000000 00010111 [0xA5] 2018.03.29 17:42 | Partition 1 | Zone bypassed: 2 * 10100101 0 00011000 01001111 10110001 11000001 10110101 00000000 00110011 [0xA5] 2018.03.29 17:48 | Partition 1 | Zone bypassed: 6 * Byte 0 1 2 3 4 5 6 7 8 */ if (panelData[panelByte] >= 0xB0 && panelData[panelByte] print(F("Zone bypassed: ")); printNumberOffset(panelByte, -175); return; } stream->print("Unknown data"); } /* * Status messages set 0x02 for panel commands: 0xAA, 0xCE, 0xEB, 0xEC * Structure decoding: complete * Content decoding: likely incomplete - observed messages from logs have been decoded, but there are gaps in * the numerical list of messages. * * These commands use 1 byte for the status message, and appear to use bits 0,1 of the preceding byte to * select from multiple sets of status messages, split into printPanelStatus0...printPanelStatus3. */ void dscKeybusInterface::printPanelStatus2(byte panelByte) { switch (panelData[panelByte]) { /* * Command YYY1YYY2 MMMMDD DDDHHHHH MMMMMM Status CRC * 10100101 0 00011000 01001111 10101111 10000110 00101010 00000000 01101011 [0xA5] 2018.03.29 15:33 | Partition 1 | Quick exit * 10100101 0 00010001 01101101 01110101 00111010 01100011 00000000 00110101 [0xA5] 2011.11.11 21:14 | Partition 1 | Keybus fault restored * 10100101 0 00011000 01001111 11110111 01110110 01100110 00000000 11011111 [0xA5] 2018.03.31 23:29 | Partition 1 | Enter *1 zone bypass programming * 10100101 0 00010001 01101101 01100010 11001110 01101001 00000000 10111100 [0xA5] 2011.11.11 02:51 | Partition 1 | Command output 3 * 10100101 0 00011000 01010000 01000000 00000010 10001100 00000000 11011011 [0xA5] 2018.04.02 00:00 | Partition 1 | Loss of system time * 10100101 0 00011000 01001111 10101110 00001110 10001101 00000000 01010101 [0xA5] 2018.03.29 14:03 | Partition 1 | Power on * 10100101 0 00011000 01010000 01000000 00000010 10001110 00000000 11011101 [0xA5] 2018.04.02 00:00 | Partition 1 | Panel factory default * 10100101 0 00011000 01001111 11101010 10111010 10010011 00000000 01000011 [0xA5] 2018.03.31 10:46 | Partition 1 | Disarmed by keyswitch * 10100101 0 00011000 01001111 11101010 10101110 10010110 00000000 00111010 [0xA5] 2018.03.31 10:43 | Partition 1 | Armed by keyswitch * 10100101 0 00011000 01001111 10100000 01100010 10011000 00000000 10100110 [0xA5] 2018.03.29 00:24 | Partition 1 | Armed by quick-arm * 10100101 0 00010001 01101101 01100000 00101110 10011001 00000000 01001010 [0xA5] 2011.11.11 00:11 | Partition 1 | Activate stay/away zones * 10100101 0 00011000 01001111 00101101 00011010 10011010 00000000 11101101 [0xA5] 2018.03.25 13:06 | Partition 1 | Armed: stay * 10100101 0 00011000 01001111 00101101 00010010 10011011 00000000 11100110 [0xA5] 2018.03.25 13:04 | Partition 1 | Armed: away * 10100101 0 00011000 01001111 00101101 10011010 10011100 00000000 01101111 [0xA5] 2018.03.25 13:38 | Partition 1 | Armed with no entry delay * 10100101 0 00011000 01001111 00101100 11011110 11000011 00000000 11011001 [0xA5] 2018.03.25 12:55 | Partition 1 | Enter *5 programming * 10100101 0 00011000 01001111 00101110 00000010 11100110 00000000 00100010 [0xA5] 2018.03.25 14:00 | Partition 1 | Enter *6 programming * Byte 0 1 2 3 4 5 6 7 8 */ case 0x2A: stream->print(F("Quick exit")); return; case 0x63: stream->print(F("Keybus fault restored")); return; case 0x64: stream->print(F("Keybus fault")); return; case 0x66: stream->print(F("*1: Zone bypass")); return; // 0x67 - 0x69: *7: Command output 1-3 case 0x8C: stream->print(F("Cold start")); return; case 0x8D: stream->print(F("Warm start")); return; case 0x8E: stream->print(F("Panel factory default")); return; case 0x91: stream->print(F("Swinger shutdown")); return; case 0x93: stream->print(F("Disarmed: Keyswitch")); return; case 0x96: stream->print(F("Armed: Keyswitch")); return; case 0x97: stream->print(F("Armed: Keypad away")); return; case 0x98: stream->print(F("Armed: Quick-arm")); return; case 0x99: stream->print(F("Activate stay/away zones")); return; case 0x9A: stream->print(F("Armed: Stay")); return; case 0x9B: stream->print(F("Armed: Away")); return; case 0x9C: stream->print(F("Armed: No entry delay")); return; // 0x9E - 0xC2: *1: Access codes 1-34, 40-42 // 0xC3 - 0xC5: *5: Access codes 40-42 // 0xC6 - 0xE5: Access codes 1-34, 40-42 // 0xE6 - 0xE8: *6: Access codes 40-42 // 0xE9 - 0xF0: Keypad restored: Slots 1-8 // 0xF1 - 0xF8: Keypad trouble: Slots 1-8 // 0xF9 - 0xFE: Zone expander restored: 1-6 case 0xFF: stream->print(F("Zone expander trouble: 1")); return; } /* * *7: Command output 1-3 */ if (panelData[panelByte] >= 0x67 && panelData[panelByte] print(F("Command output: ")); printNumberOffset(panelByte, -0x66); return; } /* * *1: Access codes 1-34, 40-42 */ if (panelData[panelByte] >= 0x9E && panelData[panelByte] print(F("*1: ")); printPanelAccessCode(dscCode); return; } /* * *5: Access codes 40-42 */ if (panelData[panelByte] >= 0xC3 && panelData[panelByte] print(F("*5: ")); printPanelAccessCode(dscCode); return; } /* * Access codes 1-32 * * Command YYY1YYY2 MMMMDD DDDHHHHH MMMMMM Status CRC * 10100101 0 00010001 01101101 01100000 00111110 11000110 00000000 10000111 [0xA5] 2011.11.11 00:15 | Partition 1 | User code 1 * 10100101 0 00010001 01101101 01100000 01111010 11100101 00000000 11100010 [0xA5] 2011.11.11 00:30 | Partition 1 | User code 32 * Byte 0 1 2 3 4 5 6 7 8 */ if (panelData[panelByte] >= 0xC6 && panelData[panelByte] = 0xE6 && panelData[panelByte] print(F("*6: ")); printPanelAccessCode(dscCode); return; } /* * Keypad restored: Slots 1-8 * * Command YYY1YYY2 MMMMDD DDDHHHHH MMMMMM Status CRC * 10100101 0 00010001 01101101 01110100 10001110 11101001 11111111 00001101 [0xA5] 2011.11.11 20:35 | Partition 1 | Keypad restored: Slot 1 * 10100101 0 00010001 01101101 01110100 00110010 11110000 11111111 10111000 [0xA5] 2011.11.11 20:12 | Partition 1 | Keypad restored: Slot 8 * Byte 0 1 2 3 4 5 6 7 8 */ if (panelData[panelByte] >= 0xE9 && panelData[panelByte] print(F("Keypad restored: Slot ")); printNumberOffset(panelByte, -232); return; } /* * Keypad trouble: Slots 1-8 * * Command YYY1YYY2 MMMMDD DDDHHHHH MMMMMM Status CRC * 10100101 0 00010001 01101101 01110100 10000110 11110001 11111111 00001101 [0xA5] 2011.11.11 20:33 | Partition 1 | Keypad trouble: Slot 1 * 10100101 0 00010001 01101101 01110100 00101110 11111000 11111111 10111100 [0xA5] 2011.11.11 20:11 | Partition 1 | Keypad trouble: Slot 8 * Byte 0 1 2 3 4 5 6 7 8 */ if (panelData[panelByte] >= 0xF1 && panelData[panelByte] print(F("Keypad trouble: Slot ")); printNumberOffset(panelByte, -240); return; } /* * Zone expander restored: 1-6 */ if (panelData[panelByte] >= 0xF9 && panelData[panelByte] print(F("Zone expander restored: ")); printNumberOffset(panelByte, -248); return; } stream->print("Unknown data"); } /* * Status messages set 0x03 for panel commands: 0xAA, 0xCE, 0xEB, 0xEC * Structure decoding: complete * Content decoding: likely incomplete - observed messages from logs have been decoded, but there are gaps in * the numerical list of messages. * * These commands use 1 byte for the status message, and appear to use bits 0,1 of the preceding byte to * select from multiple sets of status messages, split into printPanelStatus0...printPanelStatus3. * * Command YYY1YYY2 MMMMDD DDDHHHHH MMMMMM Status CRC * 10100101 0 00100000 00101010 01100000 10111111 01000010 11111111 01001111 [0xA5] 2020.10.19 00:47 | PC/RF5132: Tamper * 10100101 0 00100000 00101010 01100000 10111111 01000001 11111111 01001110 [0xA5] 2020.10.19 00:47 | PC/RF5132: Tamper restored * 10100101 0 00100000 00001001 10000000 11010011 01000100 11111111 01100100 [0xA5] 2020.02.12 00:52 | PC5208: Tamper * 10100101 0 00100000 00101010 11000000 11011111 01010001 11111111 11011110 [0xA5] 2020.10.22 00:55 | Module tamper restored: Slot 16 * 10100101 0 00100000 00101010 11000000 11011111 01010010 11111111 11011111 [0xA5] 2020.10.22 00:55 | Module tamper: Slot 16 * Byte 0 1 2 3 4 5 6 7 8 */ void dscKeybusInterface::printPanelStatus3(byte panelByte) { switch (panelData[panelByte]) { case 0x05: stream->print(F("PC/RF5132: Supervisory restored")); return; case 0x06: stream->print(F("PC/RF5132: Supervisory trouble")); return; case 0x09: stream->print(F("PC5204: Supervisory restored")); return; case 0x0A: stream->print(F("PC5204: Supervisory trouble")); return; case 0x17: stream->print(F("Zone expander restored: 7")); return; case 0x18: stream->print(F("Zone expander trouble: 7")); return; // 0x25 - 0x2C: Keypad tamper restored, slots 1-8 // 0x2D - 0x34: Keypad tamper, slots 1-8 // 0x35 - 0x3A: Module tamper restored, slots 9-14 // 0x3B - 0x40: Module tamper, slots 9-14 case 0x41: stream->print(F("PC/RF5132: Tamper restored")); return; case 0x42: stream->print(F("PC/RF5132: Tamper")); return; case 0x43: stream->print(F("PC5208: Tamper restored")); return; case 0x44: stream->print(F("PC5208: Tamper")); return; case 0x45: stream->print(F("PC5204: Tamper restored")); return; case 0x46: stream->print(F("PC5204: Tamper")); return; case 0x51: stream->print(F("Zone expander tamper restored: 7")); return; case 0x52: stream->print(F("Zone expander tamper: 7")); return; case 0xB3: stream->print(F("PC5204: Battery restored")); return; case 0xB4: stream->print(F("PC5204: Battery trouble")); return; case 0xB5: stream->print(F("PC5204: Aux supply restored")); return; case 0xB6: stream->print(F("PC5204: Aux supply trouble")); return; case 0xB7: stream->print(F("PC5204: Output 1 restored")); return; case 0xB8: stream->print(F("PC5204: Output 1 trouble")); return; case 0xFF: stream->print(F("Extended status")); return; } /* * Zone expander trouble: 2-6 */ if (panelData[panelByte] print(F("Zone expander trouble: ")); printNumberOffset(panelByte, 2); return; } /* * Keypad tamper restored: 1-8 */ if (panelData[panelByte] >= 0x25 && panelData[panelByte] print(F("Keypad tamper restored: ")); printNumberOffset(panelByte, -0x24); return; } /* * Keypad tamper: 1-8 */ if (panelData[panelByte] >= 0x2D && panelData[panelByte] print(F("Keypad tamper: ")); printNumberOffset(panelByte, -0x2C); return; } /* * Zone expander tamper restored: 1-6 * * Command YYY1YYY2 MMMMDD DDDHHHHH MMMMMM Status CRC * 10100101 0 00100000 00101010 11000110 00101011 00110101 11111111 00010100 [0xA5] 2020.10.22 06:10 | Zone expander tamper restored: 1 * 10100101 0 00100000 00101010 11000000 00101111 00111010 11111111 00010111 [0xA5] 2020.10.22 00:11 | Zone expander tamper restored: 6 * 11101011 0 00000000 00100000 00101010 11000110 00101000 00000011 00110101 11111111 01011010 [0xEB] 2020.10.22 06:10 | Zone expander tamper restored: 1 * Byte 0 1 2 3 4 5 6 7 8 9 10 */ if (panelData[panelByte] >= 0x35 && panelData[panelByte] print(F("Zone expander tamper restored: ")); printNumberOffset(panelByte, -52); return; } /* * Zone expander tamper: 1-6 * * Command YYY1YYY2 MMMMDD DDDHHHHH MMMMMM Status CRC * 10100101 0 00100000 00101010 11000110 00101011 00111011 11111111 00011010 [0xA5] 2020.10.22 06:10 | Zone expander tamper: 1 * 10100101 0 00100000 00101010 11000000 00101111 01000000 11111111 00011101 [0xA5] 2020.10.22 00:11 | Zone expander tamper: 6 * 11101011 0 00000000 00100000 00101010 11000110 00101000 00000011 00111011 11111111 01100000 [0xEB] 2020.10.22 06:10 | Zone expander tamper: 1 * Byte 0 1 2 3 4 5 6 7 8 9 10 */ if (panelData[panelByte] >= 0x3B && panelData[panelByte] print(F("Zone expander tamper: ")); printNumberOffset(panelByte, -58); return; } stream->print("Unknown data"); } /* * Status messages set 0x04 for panel commands: 0xEB, 0xEC * Structure decoding: complete * Content decoding: likely incomplete - observed messages from logs have been decoded, but there are gaps in * the numerical list of messages. * * These commands use 1 byte for the status message, and appear to use the preceding byte to select * from multiple sets of status messages, split into printPanelStatus4...printPanelStatus1B. * * Command Partition YYY1YYY2 MMMMDD DDDHHHHH MMMMMM Status CRC * 11101011 0 00000001 00011000 00011000 10001111 00101000 00000100 00000000 10010001 01101000 [0xEB] 2018.06.04 15:10 | Partition 1 | Zone alarm: 33 * 11101011 0 00000001 00000001 00000100 01100000 00010100 00000100 01000000 10000001 00101010 [0xEB] 2001.01.03 00:05 | Partition 1 | Zone tamper: 33 * 11101011 0 00000001 00000001 00000100 01100000 00001000 00000100 01011111 10000001 00111101 [0xEB] 2001.01.03 00:02 | Partition 1 | Zone tamper: 64 * 11101011 0 00000001 00000001 00000100 01100000 00011000 00000100 01100000 11111111 11001100 [0xEB] 2001.01.03 00:06 | Partition 1 | Zone tamper restored: 33 * Byte 0 1 2 3 4 5 6 7 8 9 10 */ void dscKeybusInterface::printPanelStatus4(byte panelByte) { switch (panelData[panelByte]) { case 0x86: stream->print(F("Periodic test with trouble")); return; case 0x87: stream->print(F("Exit fault")); return; case 0x89: stream->print(F("Alarm cancelled")); return; } if (panelData[panelByte] print("Zone alarm: "); printNumberOffset(panelByte, 33); } else if (panelData[panelByte] >= 0x20 && panelData[panelByte] print("Zone alarm restored: "); printNumberOffset(panelByte, 1); } else if (panelData[panelByte] >= 0x40 && panelData[panelByte] print("Zone tamper: "); printNumberOffset(panelByte, -31); } else if (panelData[panelByte] >= 0x60 && panelData[panelByte] print("Zone tamper restored: "); printNumberOffset(panelByte, -63); } else stream->print("Unknown data"); } /* * Status messages set 0x05 for panel commands: 0xEB, 0xEC * Structure decoding: complete * Content decoding: likely incomplete - observed messages from logs have been decoded, but there are gaps in * the numerical list of messages. * * These commands use 1 byte for the status message, and appear to use the preceding byte to select * from multiple sets of status messages, split into printPanelStatus4...printPanelStatus1B. */ void dscKeybusInterface::printPanelStatus5(byte panelByte) { /* * Armed by access codes 35-95 * 0x00 - 0x04: Access codes 35-39 * 0x05 - 0x39: Access codes 43-95 */ if (panelData[panelByte] print(F("Armed: ")); printPanelAccessCode(dscCode, false); return; } /* * Disarmed by access codes 35-95 * 0x3A - 0x3E: Access codes 35-39 * 0x3F - 0x73: Access codes 43-95 */ if (panelData[panelByte] >= 0x3A && panelData[panelByte] print(F("Disarmed: ")); printPanelAccessCode(dscCode, false); return; } stream->print("Unknown data"); } /* * Status messages set 0x14 for panel commands: 0xEB, 0xEC * Structure decoding: complete * Content decoding: likely incomplete - observed messages from logs have been decoded, but there are gaps in * the numerical list of messages. * * These commands use 1 byte for the status message, and appear to use the preceding byte to select * from multiple sets of status messages, split into printPanelStatus4...printPanelStatus1B. */ void dscKeybusInterface::printPanelStatus14(byte panelByte) { #if !defined(__AVR__) // Excludes Arduino/AVR to conserve storage space switch (panelData[panelByte]) { case 0xC0: stream->print(F("TLink com fault")); return; case 0xC2: stream->print(F("Tlink network fault")); return; case 0xC4: stream->print(F("TLink receiver trouble")); return; case 0xC5: stream->print(F("TLink receiver restored")); return; } #endif printUnknownData(); } /* * Status messages set 0x16 for panel commands: 0xEB, 0xEC * Structure decoding: complete * Content decoding: likely incomplete - observed messages from logs have been decoded, but there are gaps in * the numerical list of messages. * * These commands use 1 byte for the status message, and appear to use the preceding byte to select * from multiple sets of status messages, split into printPanelStatus4...printPanelStatus1B. */ void dscKeybusInterface::printPanelStatus16(byte panelByte) { switch (panelData[panelByte]) { case 0x80: stream->print(F("Trouble acknowledged")); return; case 0x81: stream->print(F("RF delinquency trouble")); return; case 0x82: stream->print(F("RF delinquency restore")); return; } printUnknownData(); } /* * Status messages set 0x17 for panel commands: 0xEB, 0xEC * Structure decoding: complete * Content decoding: likely incomplete - observed messages from logs have been decoded, but there are gaps in * the numerical list of messages. * * These commands use 1 byte for the status message, and appear to use the preceding byte to select * from multiple sets of status messages, split into printPanelStatus4...printPanelStatus1B. */ void dscKeybusInterface::printPanelStatus17(byte panelByte) { /* * *1: Access codes 35-95 * 0x4A - 0x83: *1: Access codes 35-39, 43-95 */ if (panelData[panelByte] >= 0x4A && panelData[panelByte] print(F("*1: ")); printPanelAccessCode(dscCode, false); return; } /* * *2: Access codes 1-95 * 0x00 - 0x24: *2: Access code 1-32, 40-42 * 0x84 - 0xBD: *2: Access codes 35-39, 43-95 */ if (panelData[panelByte] print(F("*2: ")); printPanelAccessCode(dscCode); return; } if (panelData[panelByte] >= 0x84 && panelData[panelByte] print(F("*2: ")); printPanelAccessCode(dscCode, false); return; } /* * *3: Access codes 1-95 * 0x25 - 0x49: *3: Access code 1-32, 40-42 * 0xBE - 0xF7: *3: Access codes 35-39, 43-95 */ if (panelData[panelByte] >= 0x25 && panelData[panelByte] print(F("*3: ")); printPanelAccessCode(dscCode); return; } if (panelData[panelByte] >= 0xBE && panelData[panelByte] print(F("*3: ")); printPanelAccessCode(dscCode, false); return; } stream->print("Unknown data"); } /* * Status messages set 0x18 for panel commands: 0xEB, 0xEC * Structure decoding: complete * Content decoding: likely incomplete - observed messages from logs have been decoded, but there are gaps in * the numerical list of messages. * * These commands use 1 byte for the status message, and appear to use the preceding byte to select * from multiple sets of status messages, split into printPanelStatus4...printPanelStatus1B. */ void dscKeybusInterface::printPanelStatus18(byte panelByte) { /* * *7/User/Auto-arm cancel by access codes 35-95 * * 0x00 - 0x04: *7, * Access codes 35-39 * 0x05 - 0x39: *7, * Access codes 43-95 */ if (panelData[panelByte] = 0x3A && panelData[panelByte] print(F("*5: ")); printPanelAccessCode(dscCode, false); return; } /* * *6: Access codes 1-95 * * 0x96 - 0xBC: *6: Access codes 1-39 * 0xBD - 0xF1: *6: Access codes 43-95 */ if (panelData[panelByte] >= 0x96 && panelData[panelByte] print(F("*6: ")); printPanelAccessCode(dscCode, false); return; } stream->print("Unknown data"); } /* * Status messages set 0x1B for panel commands: 0xEB, 0xEC * Structure decoding: complete * Content decoding: likely incomplete - observed messages from logs have been decoded, but there are gaps in * the numerical list of messages. * * These commands use 1 byte for the status message, and appear to use the preceding byte to select * from multiple sets of status messages, split into printPanelStatus4...printPanelStatus1B. */ void dscKeybusInterface::printPanelStatus1B(byte panelByte) { switch (panelData[panelByte]) { case 0xF1: stream->print(F("System reset transmission")); return; } printUnknownData(); } /* * 0x05: Status - partitions 1-4 * Interval: constant * CRC: no * Structure decoding: complete * Content decoding: *incomplete * * Byte 2: Partition 1 lights, printPanelLights() * Byte 3: Partition 1 status, printPanelMessages() * Byte 4: Partition 2 lights * Byte 5: Partition 2 status * * Later generation panels: * Byte 6: Partition 3 lights * Byte 7: Partition 3 status * Byte 8: Partition 4 lights * Byte 9: Partition 4 status * * Early generation panels: * Command 1:Lights 1:Status 2:Lights 2:Status * 00000101 0 10000001 00000001 10010001 11000111 [0x05] Partition 1: Ready Backlight - Partition ready | Partition 2: disabled * 00000101 0 10010000 00000011 10010001 11000111 [0x05] Partition 1: Trouble Backlight - Zones open | Partition 2: disabled * 00000101 0 10001010 00000100 10010001 11000111 [0x05] Partition 1: Armed Bypass Backlight - Armed stay | Partition 2: disabled * 00000101 0 10000010 00000101 10010001 11000111 [0x05] Partition 1: Armed Backlight - Armed away | Partition 2: disabled * 00000101 0 10000010 00010001 10010001 11000111 [0x05] Partition 1: Armed Backlight - Partition in alarm | Partition 2: disabled * 00000101 0 10000001 00111110 10010001 11000111 [0x05] Partition 1: Ready Backlight - Partition disarmed | Partition 2: disabled * Byte 0 1 2 3 4 5 * * Later generation panels: * Command 1:Lights 1:Status 2:Lights 2:Status 3:Lights 3:Status 4:Lights 4:Status * 00000101 0 10000000 00000011 10000010 00000101 10000010 00000101 00000000 11000111 [0x05] Partition 1: Backlight - Zones open | Partition 2: Armed Backlight - Armed away | Partition 3: Armed Backlight - Armed away | Partition 4: disabled * Byte 0 1 2 3 4 5 6 7 8 9 */ void dscKeybusInterface::printPanel_0x05() { printPanelPartitionStatus(1, 3, 5); if (!keybusVersion1) { stream->print(" | "); printPanelPartitionStatus(3, 7, 9); } } /* * 0x0A_0F: Status in programming, partitions 1-2 * Interval: constant in *8 programming * CRC: yes * Structure decoding: complete * Content decoding: *incomplete * * Byte 2: Partition lights, printPanelLights() * Byte 3: Partition status, printPanelMessages() * Byte 4: Zone lights 1-8 * Byte 5: Zone lights 9-16 * Byte 6: Zone lights 17-24 * Byte 7: Zone lights 25-32 * Byte 8: Zone lights for *5 access codes 33,34,41,42 * Byte 9: CRC * * Command 1:Lights 1:Status Zones1+ Zones9+ Zones17+ Zones25+ CRC * 00001010 0 10000010 11100100 00000000 00000000 00000000 00000000 00000000 01110000 [0x0A] Armed Backlight - *8: Main menu | Zone lights: none * 00001010 0 10000001 11101110 01100101 00000000 00000000 00000000 00000000 11011110 [0x0A] Ready Backlight - *8: Input required: 1 option per zone | Zone lights: 1 3 6 7 * Byte 0 1 2 3 4 5 6 7 8 9 */ void dscKeybusInterface::printPanel_0x0A_0F() { byte partition = 0; switch (panelData[0]) { case 0x0A: partition = 1; break; case 0x0F: partition = 2; break; } printPanelPartitionStatus(partition, 3, 3); printZoneLights(); bool zoneLights = printPanelZones(4, 1); if (panelData[8] != 0 && panelData[8] != 128) { zoneLights = true; if (bitRead(panelData[8], 0)) printNumberSpace(33); if (bitRead(panelData[8], 1)) printNumberSpace(34); if (bitRead(panelData[8], 3)) printNumberSpace(41); if (bitRead(panelData[8], 4)) printNumberSpace(42); } if (!zoneLights) stream->print(F("none")); } /* * 0x11: Module supervision query * Interval: 30s * CRC: no * Structure decoding: complete * Content decoding: complete * * Bytes 2-6: 10101010 * * Later generation panels: * Bytes 7-8: 10101010 * * Early generation panels: * 00010001 0 10101010 10101010 10101010 10101010 10101010 [0x11] Module supervision query * 11111111 1 00111111 11111111 11111111 11111111 11111111 [Module/0x11] Keypad slots: 1 * 11111111 1 11111111 11111100 11111111 11111111 11111111 [Module/0x11] Keypad slots: 8 * Byte 0 1 2 3 4 5 6 * * Later generation panels: * 00010001 0 10101010 10101010 10101010 10101010 10101010 10101010 10101010 [0x11] Module supervision query * 11111111 1 00111111 11111111 11111111 11001111 11111111 11111111 11111111 [Module/0x11] Keypad slots: 1 | Zone expander: 6 * Byte 0 1 2 3 4 5 6 7 8 */ void dscKeybusInterface::printPanel_0x11() { stream->print(F("Module supervision query")); } /* * 0x16: Panel configuration * Interval: 4min * CRC: yes * Structure decoding: *incomplete * Content decoding: *incomplete * * Byte 2: Unknown data, 00001110 observed on all tested panels * Byte 3: Panel version * Byte 4 bits 0,1: Zone wiring resistors configuration * Byte 4 bit 2: Unknown data * Byte 4 bit 3: Code length flag * Byte 4 bit 4: *8 programming mode flag * Byte 4 bits 5-7: Unknown data * Byte 5: CRC * * Command Version CRC * 00010110 0 00001110 00100011 11010010 00011001 [0x16] Panel version: v2.3 | Zone wiring: EOL | Code length: 4 digits | *8 programming: no * 00010110 0 00001110 00100011 11100001 00101000 [0x16] Panel version: v2.3 | Zone wiring: NC | Code length: 4 digits | *8 programming: yes * 00010110 0 00001110 00100011 11100110 00101101 [0x16] Panel version: v2.3 | Zone wiring: EOL | Code length: 4 digits | *8 programming: yes * 00010110 0 00001110 00100011 11110010 00111001 [0x16] Panel version: v2.3 | Zone wiring: EOL | Code length: 4 digits | *8 programming: no * 00010110 0 00001110 00010000 11110011 00100111 [0x16] Panel version: v1.0 | Zone wiring: DEOL | Code length: 4 digits | *8 programming: no * 00010110 0 00001110 01000001 11110101 01011010 [0x16] Panel version: v4.1 | Zone wiring: NC | Code length: 4 digits | *8 programming: no * 00010110 0 00001110 01000010 10110101 00011011 [0x16] Panel version: v4.2 | Zone wiring: NC | Code length: 4 digits | *8 programming: no * 00010110 0 00001110 01000010 10110001 00010111 [0x16] Panel version: v4.2 | Zone wiring: NC | Code length: 4 digits | *8 programming: no * Byte 0 1 2 3 4 5 */ void dscKeybusInterface::printPanel_0x16() { if (panelData[2] == 0x0E) { // Panel version stream->print(F("Panel version: v")); stream->print(panelData[3] >> 4); stream->print("."); stream->print(panelData[3] & 0x0F); // Zone wiring stream->print(F(" | Zone wiring: ")); switch (panelData[4] & 0x03) { case 0x01: stream->print(F("NC ")); break; case 0x02: stream->print(F("EOL ")); break; case 0x03: stream->print(F("DEOL ")); break; } // Code length stream->print(F("| Code length: ")); if (panelData[4] & 0x08) stream->print(F("6")); else stream->print(F("4")); stream->print(F(" digits ")); // *8 programming mode status stream->print(F("| *8 programming: ")); if (panelData[4] & 0x10) stream->print(F("no ")); else stream->print(F("yes ")); } else printUnknownData(); } /* * 0x1B: Status - partitions 5-8 * Interval: constant * CRC: no * Structure decoding: complete * Content decoding: *incomplete * * Byte 2: Partition 5 lights, printPanelLights() * Byte 3: Partition 5 status, printPanelMessages() * Byte 4: Partition 6 lights * Byte 5: Partition 6 status * Byte 6: Partition 7 lights * Byte 7: Partition 7 status * Byte 8: Partition 8 lights * Byte 9: Partition 8 status * * Command 5:Lights 5:Status 6:Lights 6:Status 7:Lights 7:Status 8:Lights 8:Status * 00011011 0 10010001 00000001 00010000 11000111 00010000 11000111 00010000 11000111 [0x1B] Partition 5: Ready Trouble Backlight - Partition ready | Partition 6: disabled | Partition 7: disabled | Partition 8: disabled * Byte 0 1 2 3 4 5 6 7 8 9 */ void dscKeybusInterface::printPanel_0x1B() { printPanelPartitionStatus(5, 3, 9); } /* * 0x1C: Verify keypad Fire/Auxiliary/Panic * Interval: immediate after keypad button press * CRC: no * Structure decoding: complete * Content decoding: complete * * 01110111 1 11111111 11111111 11111111 11111111 [Keypad] Fire alarm * 00011100 0 [0x1C] Verify keypad Fire/Auxiliary/Panic * 01110111 1 [Keypad] Fire alarm */ void dscKeybusInterface::printPanel_0x1C() { stream->print(F("Verify keypad Fire/Auxiliary/Panic")); } /* * 0x22: Zone expander 0 (PC/RF5132) query * Interval: after zone expander status notification * CRC: no * Structure decoding: complete * Content decoding: complete * * Bytes 2-6: 11111111 * * 11111111 1 11111111 11111111 01111111 11111111 [Module/0x05] Zone expander notification: 0 * 00100010 0 11111111 11111111 11111111 11111111 11111111 [0x22] Zone expander query: 0 * 11111111 1 01011001 01010101 01010101 01010101 10000100 [Module/0x22] Zone expander: 0 | Zones changed: 2 tamper * * 11111111 1 11111111 11111111 10111111 11111111 [Module/0x05] Zone expander notification: 1 * 00101000 0 11111111 11111111 11111111 11111111 11111111 [0x28] Zone expander query: 1 * 11111111 1 01010111 01010101 11111111 11111111 01101111 [Module/0x28] Zone expander: 1 | Zones changed: 9 open (D/EOL) * Byte 0 1 2 3 4 5 6 */ void dscKeybusInterface::printPanel_0x22_28_33_39() { byte expander = 0; switch (panelData[0]) { case 0x22: expander = 0; break; case 0x28: expander = 1; break; case 0x33: expander = 2; break; case 0x39: expander = 3; break; } stream->print(F("Zone expander query: ")); stream->print(expander); } /* * 0x27: Status with zones 1-8 * Interval: 4m * CRC: yes * Structure decoding: complete * Content decoding: *incomplete * * Byte 2: Partition 1 lights, printPanelLights() * Byte 3: Partition 1 status, printPanelMessages() * Byte 4: Partition 2 lights * Byte 5: Partition 2 status * Byte 6: Zones 1-8 * Byte 7: CRC * * Command 1:Lights 1:Status 2:Lights 3:Status Zones1+ CRC * 00100111 0 10000001 00000001 10010001 11000111 00000000 00000001 [0x27] Partition 1: Ready Backlight - Partition ready | Partition 2: disabled | Zones 1-8 open: none * 00100111 0 10000001 00000001 10010001 11000111 00000010 00000011 [0x27] Partition 1: Ready Backlight - Partition ready | Partition 2: disabled | Zones 1-8 open: 2 * 00100111 0 10001010 00000100 10010001 11000111 00000000 00001101 [0x27] Partition 1: Armed Bypass Backlight - Armed stay | Partition 2: disabled | Zones 1-8 open: none * 00100111 0 10001010 00000100 11111111 11111111 00000000 10110011 [0x27] Partition 1: Armed Bypass Backlight - Armed stay | Zones 1-8 open: none * 00100111 0 10000010 00000101 10010001 11000111 00000000 00000110 [0x27] Partition 1: Armed Backlight - Armed away | Partition 2: disabled | Zones 1-8 open: none * 00100111 0 10000010 00000101 11111111 11111111 00000000 10101100 [0x27] Partition 1: Armed Backlight - Armed away | Zones 1-8 open: none * 00100111 0 10000010 00001100 10010001 11000111 00000001 00001110 [0x27] Partition 1: Armed Backlight - Entry delay in progress | Partition 2: disabled | Zones 1-8 open: 1 * 00100111 0 10000010 00010001 10010001 11000111 00000001 00010011 [0x27] Partition 1: Armed Backlight - Partition in alarm | Partition 2: disabled | Zones 1-8 open: 1 * 00100111 0 10000010 00001101 10010001 11000111 00000001 00001111 [0x27] Partition 1: Armed Backlight - Opening after alarm | Partition 2: disabled | Zones 1-8 open: 1 * 00100111 0 10000010 00010001 11011011 11111111 00000010 10010110 [0x27] Partition 1: Armed Backlight - Partition in alarm | Zones 1-8 open: 2 * 00100111 0 00000001 00000001 11111111 11111111 00000000 00100111 [0x27] Partition 1: Ready - Partition ready | Zones 1-8 open: none * 00100111 0 10010001 00000001 11111111 11111111 00000000 10110111 [0x27] Partition 1: Ready Trouble Backlight - Partition ready | Zones 1-8 open: none * 00100111 0 10010001 00000001 10100000 00000000 00000000 01011001 [0x27] Partition 1: Ready Trouble Backlight - Partition ready | Partition 2: Program Backlight - Unknown data: 0x00 | Zones 1-8 open: none * 00100111 0 10010000 00000011 11111111 11111111 00111111 11110111 [0x27] Partition 1: Trouble Backlight - Zones open | Zones 1-8 open: 1 2 3 4 5 6 * 00100111 0 10010000 00000011 10010001 11000111 00111111 01010001 [0x27] Partition 1: Trouble Backlight - Zones open | Partition 2: disabled | Zones 1-8 open: 1 2 3 4 5 6 * 00100111 0 10000000 00000011 10000010 00000101 00011101 01001110 [0x27] Partition 1: Backlight - Zones open | Partition 2: Armed Backlight - Armed away | Zones 1-8 open: 1 3 4 5 * Byte 0 1 2 3 4 5 6 7 */ void dscKeybusInterface::printPanel_0x27() { printPanelPartitionStatus(1, 3, 5); stream->print(F(" | Zones 1-8 open: ")); printPanelBitNumbers(6, 1); } /* * 0x2D: Status with zones 9-16 * Interval: 4m * CRC: yes * Structure decoding: complete * Content decoding: *incomplete * * Byte 2: Partition 1 lights, printPanelLights() * Byte 3: Partition 1 status, printPanelMessages() * Byte 4: Partition 2 lights * Byte 5: Partition 2 status * Byte 6: Zones 9-16 * Byte 7: CRC * * Command 1:Lights 1:Status 2:Lights 3:Status Zones9+ CRC * 00101101 0 10000000 00000011 10000001 11000111 00000001 11111001 [0x2D] Partition 1: Backlight - Zones open | Partition 2: disabled | Zones 9-16 open: 9 * 00101101 0 10000000 00000011 10000010 00000101 00000000 00110111 [0x2D] Partition 1: Backlight - Zones open | Partition 2: Armed Backlight - Armed away | Zones 9-16 open: none * Byte 0 1 2 3 4 5 6 7 */ void dscKeybusInterface::printPanel_0x2D() { printPanelPartitionStatus(1, 3, 5); stream->print(F(" | Zones 9-16 open: ")); printPanelBitNumbers(6, 9); } /* * 0x34: Status with zones 17-24 * Interval: 4m * CRC: yes * Structure decoding: complete * Content decoding: *incomplete * * Byte 2: Partition 1 lights, printPanelLights() * Byte 3: Partition 1 status, printPanelMessages() * Byte 4: Partition 2 lights * Byte 5: Partition 2 status * Byte 6: Zones 17-24 * Byte 7: CRC */ void dscKeybusInterface::printPanel_0x34() { printPanelPartitionStatus(1, 3, 5); stream->print(F(" | Zones 17-24 open: ")); printPanelBitNumbers(6, 17); } /* * 0x3E: Status with zones 25-32 * Interval: 4m * CRC: yes * Structure decoding: complete * Content decoding: *incomplete * * Byte 2: Partition 1 lights, printPanelLights() * Byte 3: Partition 1 status, printPanelMessages() * Byte 4: Partition 2 lights * Byte 5: Partition 2 status * Byte 6: Zones 25-32 * Byte 7: CRC */ void dscKeybusInterface::printPanel_0x3E() { printPanelPartitionStatus(1, 3, 5); stream->print(F(" | Zones 25-32 open: ")); printPanelBitNumbers(6, 25); } /* * 0x41: Wireless module query * Interval: immediate on wireless module notification * CRC: no * Structure decoding: complete * Content decoding: complete * * Bytes 2-10: 11111111 * * 11111111 1 11111111 11111111 11110111 11111111 [Module/0x05] Wireless module battery notification * 01000001 0 11111111 11111111 11111111 11111111 11111111 11111111 11111111 11111111 11111111 [0x41] Wireless module query * 11111111 1 11111111 11011111 11111111 11111111 11111111 11111111 11111111 11111111 11011000 [Module/0x41] Wireless module | Battery low zones: 11 * Byte 0 1 2 3 4 5 6 7 8 9 10 */ void dscKeybusInterface::printPanel_0x41() { stream->print(F("Wireless module query")); } /* * 0x4C: Module tamper query * Interval: immediate on module tamper notification & after exiting *8 programming * CRC: no * Structure decoding: complete * Content decoding: *incomplete * * Bytes 2-12: 10101010 * * Later generation panels: * Bytes 13-14: 10101010 * * 11111111 1 11111111 11111111 11111110 11111111 [Module/0x05] Module tamper notification * 01001100 0 10101010 10101010 10101010 10101010 10101010 10101010 10101010 10101010 10101010 10101010 10101010 [0x4C] Module tamper query * 11111111 1 00111111 11111111 11111111 11111111 11111111 11111111 11111111 11111111 11111111 11111111 11111111 [Module/0x4C] Keypad tamper: Slot 1 * Byte 0 1 2 3 4 5 6 7 8 9 10 11 12 * * Later generation panels: * 01001100 0 10101010 10101010 10101010 10101010 10101010 10101010 10101010 10101010 10101010 10101010 10101010 10101010 10101010 [0x4C] Module tamper query * 11111111 1 11111111 11111111 11111111 11110000 00111111 11111111 11111111 11111111 11111111 11111111 11111111 11111111 11111111 [Module/0x4C] Module tamper: Slot 9 * Byte 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 */ void dscKeybusInterface::printPanel_0x4C() { stream->print(F("Module tamper query")); } /* * 0x57: Wireless key query * Interval: immediate on wireless key notification * CRC: no * Structure decoding: complete * Content decoding: complete * * Bytes 2-10: 11111111 * * 11111111 1 11111111 11111111 11111111 10111111 [Module/0x05] Wireless key notification * 01010111 0 11111111 11111111 11111111 11111111 11111111 11111111 11111111 11111111 11111111 [0x57] Wireless key query * Byte 0 1 2 3 4 5 6 7 8 9 10 */ void dscKeybusInterface::printPanel_0x57() { stream->print(F("Wireless key query")); } /* * 0x58: Module status query - valid response produces 0xA5 command, byte 6 0xB1-0xC0 * Interval: immediate on module status notification and at power on after panel reset * CRC: no * Structure decoding: complete * Content decoding: *incomplete * * Bytes 2-5: 10101010 * * 11111111 1 11111111 11111111 11111111 11011111 [Module/0x05] Module status notification * 01011000 0 10101010 10101010 10101010 10101010 [0x58] Module status query * 11111111 1 11111100 11111111 11111111 11111111 [Module/0x58] PC5204: Battery restored * Byte 0 1 2 3 4 5 */ void dscKeybusInterface::printPanel_0x58() { stream->print(F("Module status query")); } /* * 0x5D_63: Flash panel lights: status and zones 1-32, partitions 1-2 * Interval: 30s * CRC: yes * Structure decoding: complete * Content decoding: complete * * Byte 2: Status lights * Byte 3: Zones 1-8 * Byte 4: Zones 9-16 * Byte 5: Zones 17-24 * Byte 6: Zones 25-32 * Byte 7: CRC * * Command 1:Lights Zones1+ Zones9+ Zones17+ Zones25+ CRC * 01011101 0 00000000 00000000 00000000 00000000 00000000 01011101 [0x5D] Partition 1 | Status lights flashing: none | Zones 1-32 flashing: none * 01011101 0 00100000 00000000 00000000 00000000 00000000 01111101 [0x5D] Partition 1 | Status lights flashing: Program | Zones 1-32 flashing: none * 01011101 0 00000000 00100000 00000000 00000000 00000000 01111101 [0x5D] Partition 1 | Status lights flashing: none | Zones 1-32 flashing: 6 * 01011101 0 00000100 00100000 00000000 00000000 00000000 10000001 [0x5D] Partition 1 | Status lights flashing: Memory | Zones 1-32 flashing: 6 * 01011101 0 00000000 00000000 00000001 00000000 00000000 01011110 [0x5D] Partition 1 | Status lights flashing: none | Zones 1-32 flashing: 9 * * 01100011 0 00000000 00000000 00000000 00000000 00000000 01100011 [0x63] Partition 2 | Status lights flashing: none | Zones 1-32 flashing: none * 01100011 0 00000100 10000000 00000000 00000000 00000000 11100111 [0x63] Partition 2 | Status lights flashing: Memory | Zones 1-32 flashing: 8 * Byte 0 1 2 3 4 5 6 7 */ void dscKeybusInterface::printPanel_0x5D_63() { byte partition = 0; switch (panelData[0]) { case 0x5D: partition = 1; break; case 0x63: partition = 2; break; } printPartition(); printNumberSpace(partition); printStatusLightsFlashing(); printPanelLights(2, false); stream->print(F("| Zones 1-32 flashing: ")); printPanelZones(3, 1); } /* * 0x64: Beep, partition 1 * CRC: yes * Structure decoding: complete * Content decoding: complete * * Byte 2: Beeps number * Byte 3: CRC * * Command Beeps CRC * 01100100 0 00000100 01101000 [0x64] Partition 1 | Beep: 2 beeps * 01100100 0 00000110 01101010 [0x64] Partition 1 | Beep: 3 beeps * 01100100 0 00001000 01101100 [0x64] Partition 1 | Beep: 4 beeps * 01100100 0 00001010 01101110 [0x64] Partition 1 | Beep: 5 beeps * 01100100 0 00001100 01110000 [0x64] Partition 1 | Beep: 6 beeps * Byte 0 1 2 3 */ void dscKeybusInterface::printPanel_0x64() { printPartition(); printNumberSpace(1); printPanelBeeps(2); } /* * 0x69: Beep, partition 2 * CRC: yes * Structure decoding: complete * Content decoding: complete * * Byte 2: Beeps number * Byte 3: CRC * * Command Beeps CRC * 01101001 0 00001100 01110101 [0x69] Partition 2 | Beep: 6 beeps * Byte 0 1 2 3 */ void dscKeybusInterface::printPanel_0x69() { printPartition(); printNumberSpace(2); printPanelBeeps(2); } /* * 0x6E: LCD keypad display * CRC: yes * Structure decoding: complete * Content decoding: complete * * Byte 2 bits 0-3: Digit 1 * Byte 2 bits 4-7: Digit 2 * Byte 3 bits 0-3: Digit 3 * Byte 3 bits 4-7: Digit 4 * Byte 4 bits 0-3: Digit 5 * Byte 4 bits 4-7: Digit 6 * Byte 5 bits 0-3: Digit 7 * Byte 5 bits 4-7: Digit 8 * Byte 6: CRC * * Command Digits Digits CRC * 01101110 0 00000001 00000001 00000000 00000000 01110000 [0x6E] Access code: 010100 * 01101110 0 10101010 10101010 00000000 00000000 11000010 [0x6E] Access code: AAAA00 * Byte 0 1 2 3 4 5 6 */ void dscKeybusInterface::printPanel_0x6E() { stream->print(F("LCD display: ")); if (decimalInput) { if (panelData[2] print("0"); if (panelData[2] print("0"); stream->print(panelData[2], DEC); } else { for (byte panelByte = 2; panelByte print(panelData[panelByte] >> 4, HEX); stream->print(panelData[panelByte] & 0x0F, HEX); } } } /* * 0x70: LCD keypad data query * CRC: no * Structure decoding: complete * Content decoding: complete * * Byte 2-6: 11111111 * * Command Tone CRC * 01110000 0 11111111 11111111 11111111 11111111 11111111 [0x70] LCD keypad data query * Byte 0 1 2 3 4 5 6 */ void dscKeybusInterface::printPanel_0x70() { stream->print(F("LCD keypad data query")); } /* * 0x75: Tone, partition 1 * CRC: yes * Structure decoding: complete * Content decoding: complete * * Byte 2: Tone pattern * Byte 3: CRC * * Command Tone CRC * 01110101 0 10000000 11110101 [0x75] Partition 1 | Tone: constant tone * 01110101 0 00000000 01110101 [0x75] Partition 1 | Tone: none * Byte 0 1 2 3 */ void dscKeybusInterface::printPanel_0x75() { printPartition(); printNumberSpace(1); printPanelTone(2); } /* * 0x7A: Tone, partition 2 * CRC: yes * Structure decoding: complete * Content decoding: complete * * Byte 2: Tone pattern * Byte 3: CRC * * Command Tone CRC * 01111010 0 00000000 01111010 [0x7A] Partition 2 | Tone: none * Byte 0 1 2 3 */ void dscKeybusInterface::printPanel_0x7A() { printPartition(); printNumberSpace(2); printPanelTone(2); } /* * 0x7F: Buzzer, partition 1 * CRC: yes * Structure decoding: complete * Content decoding: complete * * Byte 2: Buzzer pattern * Byte 3: CRC * * Command Buzzer CRC * 01111111 0 00000001 10000000 [0x7F] Partition 1 | Buzzer: 1s * Byte 0 1 2 3 */ void dscKeybusInterface::printPanel_0x7F() { printPartition(); printNumberSpace(1); printPanelBuzzer(2); } /* * 0x82: Buzzer, partition 2 * CRC: yes * Structure decoding: complete * Content decoding: complete * * Byte 2: Buzzer pattern * Byte 3: CRC * * Command Buzzer CRC * 10000010 0 00000010 10000100 [0x82] Partition 2 | Buzzer: 2s * Byte 0 1 2 3 */ void dscKeybusInterface::printPanel_0x82() { printPartition(); printNumberSpace(2); printPanelBuzzer(2); } /* * 0x87: PGM outputs * CRC: yes * Structure decoding: complete * Content decoding: complete * * Byte 2 bit 0: PGM 3 * Byte 2 bit 1: PGM 4 * Byte 2 bit 2: PGM 5 * Byte 2 bit 3: PGM 6 * Byte 2 bit 4: PGM 7 * Byte 2 bit 5: PGM 8 * Byte 2 bit 6: PGM 9 * Byte 2 bit 7: PGM 10 * Byte 3 bit 0: PGM 1 * Byte 3 bit 1: PGM 2 * Byte 3 bit 2: Activates at midnight * Byte 3 bit 3: Battery check when arming * Byte 3 bit 4: PGM 11 * Byte 3 bit 5: PGM 12 * Byte 3 bit 6: PGM 13 * Byte 3 bit 7: PGM 14 * Byte 4: CRC * * Command PGM PGM CRC * 10000111 0 00000000 00000000 10000111 [0x87] PGM outputs enabled: none * 10000111 0 00000000 00000001 10001000 [0x87] PGM outputs enabled: 1 * 10000111 0 00000001 00000011 10001011 [0x87] PGM outputs enabled: 1 2 3 * 10000111 0 00010001 00000010 10011010 [0x87] PGM outputs enabled: 2 3 7 * 10000111 0 00010011 00000000 10011010 [0x87] PGM outputs enabled: 3 4 7 * 10000111 0 00010011 11110011 10001101 [0x87] PGM outputs enabled: 1 2 3 4 7 11 12 13 14 * 10000111 0 11111111 11110000 01110110 [0x87] PGM outputs enabled: 3 4 5 6 7 8 9 10 11 12 13 14 * 10000111 0 11111111 11110010 01111000 [0x87] PGM outputs enabled: 2 3 4 5 6 7 8 9 10 11 12 13 14 * Byte 0 1 2 3 4 */ void dscKeybusInterface::printPanel_0x87() { stream->print(F("PGM outputs enabled: ")); if (panelData[2] == 0 && panelData[3] == 0) stream->print(F("none ")); else { printPanelBitNumbers(3, 1, 0, 1, false); printPanelBitNumbers(2, 3, 0, 7, false); printPanelBitNumbers(3, 11, 4, 7, false); } if (panelData[3] & 0x04) stream->print(F("| Midnight ")); if (panelData[3] & 0x08) stream->print(F("| Battery check")); } /* * 0x8D: Module programming entry, User code programming key response, codes 17-32 * Note: Wireless keys 1-16 are assigned to user codes 17-32 * CRC: yes * Structure decoding: *incomplete * Content decoding: *incomplete * * Byte 2: Unknown * Byte 3: Unknown * Byte 4: Unknown * Byte 5: Unknown * Byte 6: Unknown * Byte 7: Unknown * Byte 8: Unknown * Byte 9: CRC * * Command CRC * 10001101 0 00110001 00000001 00000000 00010111 11111111 11111111 11111111 11010011 [0x8D] User code programming key response // Code 17 Key 1 * 10001101 0 00110001 00000100 00000000 00011000 11111111 11111111 11111111 11010111 [0x8D] User code programming key response // Code 18 Key 1 * 10001101 0 00110001 00000100 00000000 00010010 11111111 11111111 11111111 11010001 [0x8D] User code programming key response // Code 18 Key 2 * 10001101 0 00110001 00000101 00000000 00111000 11111111 11111111 11111111 11111000 [0x8D] User code programming key response // Code 18 Key 3 * 10001101 0 00110001 00000101 00000000 00110100 11111111 11111111 11111111 11110100 [0x8D] User code programming key response // Code 18 Key 4 * 10001101 0 00110001 00100101 00000000 00001001 11111111 11111111 11111111 11101001 [0x8D] User code programming key response // Code 29 Key 0 * 10001101 0 00110001 00100101 00000000 00000001 11111111 11111111 11111111 11100001 [0x8D] User code programming key response // Code 29 Key 1 * 10001101 0 00110001 00110000 00000000 00000000 11111111 11111111 11111111 11101011 [0x8D] User code programming key response // Message after 4th key entered * 10001101 0 00010001 01000001 00000001 00000111 01010101 11111111 11111111 00111010 [0x8D] Wls programming key response // Before WLS zone 4 placement test * 10001101 0 00010001 01000001 00000001 00001001 01010101 11111111 11111111 00111100 [0x8D] Wls programming key response // Before WLS zone 5 placement test * 10001101 0 00010001 01000001 00000001 00001011 01010101 11111111 11111111 00111110 [0x8D] Wls programming key response // Before WLS zone 6 placement test * 10001101 0 00010001 01000001 00000001 00001101 01010101 11111111 11111111 01000000 [0x8D] Wls programming key response // Before WLS zone 7 placement test * 10001101 0 00010001 01000001 00000001 00100001 01010101 11111111 11111111 01010100 [0x8D] Wls programming key response // Before WLS zone 17 placement test * 10001101 0 00010001 01000001 00000001 00111111 01010101 11111111 11111111 01110010 [0x8D] Wls programming key response // Before WLS zone 32 placement test * 10001101 0 00010001 01000001 00000001 01111111 01010101 11111111 11111111 10110010 [0x8D] Wls programming key response // Before WLS zone 64 placement test * 10001101 0 00010001 01000011 00000000 00000001 11111111 11111111 11111111 11011111 [0x8D] Wls programming key response // Location is good, same for all zones * 10001101 0 00010001 01000001 00000001 11111111 11111111 11111111 11111111 11011100 [0x8D] Wls programming key response // Wireless zone is not-assigned * 10001101 0 00010001 10100100 00000000 00000011 11111111 11111111 11111111 01000010 [0x8D] Wls programming key response // Enter 03 for [804][61] function 1 * 10001101 0 00010001 10100101 00000000 00000100 11111111 11111111 11111111 01000100 [0x8D] Wls programming key response // Enter 04 for [804][61] function 2 * 10001101 0 00010001 10100101 00000000 00000011 11111111 11111111 11111111 01000011 [0x8D] Wls programming key response // Enter 03 for [804][61] function 2 * 10001101 0 00010001 10101000 00000000 00000011 11111111 11111111 11111111 01000110 [0x8D] Wls programming key response // Enter 03 for [804][62] function 1 * 10001101 0 00010001 10101001 00000000 00000100 11111111 11111111 11111111 01001000 [0x8D] Wls programming key response // Enter 04 for [804][62] function 2 * 10001101 0 00010001 11000000 00000000 00000011 11111111 11111111 11111111 01011110 [0x8D] Wls programming key response // Enter 03 for [804][68] function 1 * 10001101 0 00010001 11000011 00000000 00110000 11111111 11111111 11111111 10001110 [0x8D] Wls programming key response // Enter 30 for [804][68] function 4 * 10001101 0 00010001 00111000 00000000 00010000 11111111 11111111 11111111 11100011 [0x8D] Wls programming key response // Enter 10 for [804][81] Wls supervisory window * 10001101 0 00010001 00111000 00000000 10010110 11111111 11111111 11111111 01101001 [0x8D] Wls programming key response // Enter 96 for [804][81] Wls supervisory window * 10001101 0 00010001 11000100 00000000 00000001 11111111 11111111 11111111 01100000 [0x8D] Wls programming key response // Enter 01 for [804][69] Keyfob 1 partition assigment * 10001101 0 00010001 11000101 00000000 00000001 11111111 11111111 11111111 01100001 [0x8D] Wls programming key response // Enter 01 for [804][69] Keyfob 2 partition assigment * 10001101 0 00010001 11000110 00000000 00000010 11111111 11111111 11111111 01100011 [0x8D] Wls programming key response // Enter 02 for [804][69] Keyfob 3 partition assigment * 10001101 0 00010001 11010100 00000000 11111111 11111111 11111111 11111111 01101110 [0x8D] Wls programming key response // All 1-8 enabled in [804][82] supervision options * 10001101 0 00010001 11010100 00000000 11110000 11111111 11111111 11111111 01011111 [0x8D] Wls programming key response // 5-8 zones enabled in [804][82] supervisiory options * 10001101 0 00010001 11010101 00000000 00001111 11111111 11111111 11111111 01111111 [0x8D] Wls programming key response // 1-4 zones enabled in [804][83] supervisiory options * 10001101 0 00010001 11010111 00000000 01111111 11111111 11111111 11111111 11110001 [0x8D] Wls programming key response // 1-7 zones enabled in [804][85] supervisiory options * 10001101 0 00010001 00111010 00000000 01000000 11111111 11111111 11111111 00010101 [0x8D] Wls programming key response // Only option 7 enabled in [804][90] options * 10001101 0 00010001 00111001 00000000 00001000 11111111 11111111 11111111 11011100 [0x8D] Wls programming key response // Set RF jamming zone 08 in [804][93] subsection * 10001101 0 00010001 00111001 00000000 00000111 11111111 11111111 11111111 11011011 [0x8D] Wls programming key response // Set RF jamming zone 07 in [804][93] subsection * Byte 0 1 2 3 4 5 6 7 8 9 */ void dscKeybusInterface::printPanel_0x8D() { #if !defined(__AVR__) stream->print(F("Module programming entry: ")); printModuleProgramming(panelData[2], panelData[3]); #else stream->print(F("Module programming entry")); #endif } /* * 0x94: Used to request programming data from modules * Interval: immediate after entering *5 access code programming, after entering section 801-809 subsection number * CRC: no * Structure decoding: *incomplete * Content decoding: *incomplete * * Byte 2: Unknown * Byte 3: Unknown * Byte 4: Unknown * Byte 5: Unknown * Byte 6: Unknown * Byte 7: Unknown * Byte 8: Unknown * Byte 9: Unknown * Byte 10: CRC * * Command CRC * 10010100 0 00010001 00000000 00000000 10100101 00000000 00000000 00000000 00010111 10100000 [0x94] Unknown data * 10010100 0 00010001 00000000 00000000 10100101 00000000 00000000 00000000 01001100 11111100 [0x94] Unknown data * Byte 0 1 2 3 4 5 6 7 8 9 10 */ void dscKeybusInterface::printPanel_0x94() { #if !defined(__AVR__) stream->print(F("Module programming request: ")); printModuleProgramming(panelData[2], panelData[3]); #else stream->print(F("Module programming request")); #endif } /* * 0x9E: DLS query * Structure decoding: complete * Content decoding: complete * CRC: no * * Bytes 2-6: 11111111 * * 10011110 0 11111111 11111111 11111111 11111111 11111111 [0x9E] DLS query * Byte 0 1 2 3 4 5 6 */ void dscKeybusInterface::printPanel_0x9E() { stream->print(F("DLS query")); } /* * 0xA5: Date, time, system status messages - partitions 1-2 * CRC: yes * Structure decoding: *incomplete * Content decoding: *incomplete * * Byte 2 bit 0-3: Year digit 2 * Byte 2 bit 4-7: Year digit 1 * Byte 3 bit 0-1: Day digit part 1 * Byte 3 bit 2-5: Month * Byte 3 bit 6-7: Partition * Byte 4 bit 0-4: Hour * Byte 4 bit 5-7: Day digit part 2 * Byte 5 bit 0-1: Selects set of status commands * Byte 5 bit 2-7: Minute * Byte 6: Status, printPanelStatus0...printPanelStatus3 * Byte 7: Unknown * Byte 8: CRC * * Command YYY1YYY2 MMMMDD DDDHHHHH MMMMMM Status CRC * 10100101 0 00011000 00001110 11101101 10000000 00000000 00000000 00111000 [0xA5] 2018.03.23 13:32 | Timestamp * 10100101 0 00011000 01001111 11001010 01000100 01001011 11111111 01100100 [0xA5] 2018.03.30 10:17 | Partition 1 | Partition in alarm * 10100101 0 00011000 01010000 01001001 10111000 01001100 11111111 01011001 [0xA5] 2018.04.02 09:46 | Partition 1 | Zone expander supervisory alarm * 10100101 0 00011000 01010000 01001010 00000000 01001101 11111111 10100011 [0xA5] 2018.04.02 10:00 | Partition 1 | Zone expander supervisory restored * 10100101 0 00011000 01001111 01110010 10011100 01001110 11111111 01100111 [0xA5] 2018.03.27 18:39 | Partition 1 | Keypad Fire alarm * Byte 0 1 2 3 4 5 6 7 8 */ void dscKeybusInterface::printPanel_0xA5() { printPanelTime(2); if (panelData[6] == 0 && panelData[7] == 0) { stream->print(F(" | Timestamp")); return; } stream->print(" | "); switch (panelData[3] >> 6) { case 0x01: printPartition(); printNumberSpace(1); stream->print("| "); break; case 0x02: printPartition(); printNumberSpace(2); stream->print("| "); break; } switch (panelData[5] & 0x03) { case 0x00: printPanelStatus0(6); return; case 0x01: printPanelStatus1(6); return; case 0x02: printPanelStatus2(6); return; case 0x03: printPanelStatus3(6); return; } } /* * 0xAA: Event buffer * CRC: yes * Structure decoding: complete * Content decoding: *incomplete * * Byte 2 bit 0-3: Year digit 2 * Byte 2 bit 4-7: Year digit 1 * Byte 3 bit 0-1: Day digit part 1 * Byte 3 bit 2-5: Month * Byte 3 bit 6-7: Partition * Byte 4 bit 0-4: Hour * Byte 4 bit 5-7: Day digit part 2 * Byte 5 bit 0-1: Selects set of status commands * Byte 5 bit 2-7: Minute * Byte 6: Status, printPanelStatus0...printPanelStatus3 * Byte 7: Event number * Byte 8: CRC * * Command YYY1YYY2 MMMMDD DDDHHHHH MMMMMM Status Event# CRC * 10101010 0 00100001 01000110 00001000 00100100 00011100 11111111 01011000 [0xAA] Event: 255 | 2021.01.16 08:09 | Zone alarm: 20 * 10101010 0 00100000 01100110 10001101 00111000 10011001 00001000 10010110 [0xAA] Event: 008 | 2020.09.20 13:14 | Armed by user code 1 * 10101010 0 00100000 01100110 10001100 11010000 10111111 00000110 01010001 [0xAA] Event: 006 | 2020.09.20 12:52 | Armed special: quick-arm/auto-arm/keyswitch/wireless key/DLS * 10101010 0 00100000 01100110 10001100 11010000 11100010 00000010 01110000 [0xAA] Event: 002 | 2020.09.20 12:52 | Disarmed by master code 40 * 10101010 0 00100000 01100110 10001100 11010000 00001011 00000101 10011100 [0xAA] Event: 005 | 2020.09.20 12:52 | Zone alarm: 3 * 10101010 0 00100000 01100110 10001100 11010000 01001011 00000100 11011011 [0xAA] Event: 004 | 2020.09.20 12:52 | Partition in alarm * 10101010 0 00100000 01100110 10001100 11010110 11100110 00000000 01111000 [0xAA] Event: 000 | 2020.09.20 12:53 | Enter *6 programming * 10101010 0 00100000 01100110 10101101 10010001 00101011 00000011 10011100 [0xAA] Event: 003 | 2020.09.21 13:36 | Armed by auto-arm * 10101010 0 00100000 01100110 10101101 11000101 10101101 00000010 01010001 [0xAA] Event: 002 | 2020.09.21 13:49 | Enter *8 programming * 10101010 0 00100000 01100110 10101101 11000101 10101100 00000001 01001111 [0xAA] Event: 001 | 2020.09.21 13:49 | Exit *8 programming * 10101010 0 00010110 10011010 00000000 00110110 11000100 00000001 01010101 [0xAA] Event: 001 | 2016.06.16 00:13 | Partition 2 | Unknown data // *5 by code 41 * Byte 0 1 2 3 4 5 6 7 8 * */ void dscKeybusInterface::printPanel_0xAA() { stream->print(F("Event: ")); if (panelData[7] < 10) stream->print("00"); else if (panelData[7] < 100) stream->print("0"); stream->print(panelData[7]); stream->print(" | "); printPanelTime(2); stream->print(" | "); switch (panelData[3] >> 6) { case 0x01: printPartition(); printNumberSpace(1); stream->print("| "); break; case 0x02: printPartition(); printNumberSpace(2); stream->print("| "); break; } switch (panelData[5] & 0x03) { case 0x00: printPanelStatus0(6); return; case 0x01: printPanelStatus1(6); return; case 0x02: printPanelStatus2(6); return; case 0x03: printPanelStatus3(6); return; } } /* * 0xB1: Enabled zones 1-32, partitions 1,2 * Interval: 4m * CRC: yes * Structure decoding: complete * Content decoding: complete * * Byte 2: Partition 1 enabled zones 1-8 * Byte 3: Partition 1 enabled zones 9-16 * Byte 4: Partition 1 enabled zones 17-24 * Byte 5: Partition 1 enabled zones 25-32 * Byte 6: Partition 2 enabled zones 1-8 * Byte 7: Partition 2 enabled zones 9-16 * Byte 8: Partition 2 enabled zones 17-24 * Byte 9: Partition 2 enabled zones 25-32 * Byte 10: CRC * * Command 1:Zone1+ Zones9+ Zones17+ Zones25+ 2:Zone1+ Zones9+ Zones17+ Zones25+ CRC * 10110001 0 11111111 00000000 00000000 00000000 00000000 00000000 00000000 00000000 10110000 [0xB1] Enabled zones 1-32 | Partition 1: 1 2 3 4 5 6 7 8 | Partition 2: none * 10110001 0 10010001 10001010 01000001 10100100 00000000 00000000 00000000 00000000 10110001 [0xB1] Enabled zones 1-32 | Partition 1: 1 5 8 10 12 16 17 23 27 30 32 | Partition 2: none * 10110001 0 11111111 00000000 00000000 11111111 00000000 00000000 00000000 00000000 10101111 [0xB1] Enabled zones 1-32 | Partition 1: 1 2 3 4 5 6 7 8 25 26 27 28 29 30 31 32 | Partition 2: none * 10110001 0 01111111 11111111 00000000 00000000 10000000 00000000 00000000 00000000 10101111 [0xB1] Enabled zones 1-32 | Partition 1: 1 2 3 4 5 6 7 9 10 11 12 13 14 15 16 | Partition 2: 8 * Byte 0 1 2 3 4 5 6 7 8 9 10 */ void dscKeybusInterface::printPanel_0xB1() { stream->print(F("Enabled zones 1-32 | Partition 1: ")); printPanelZones(2, 1); stream->print(F("| Partition 2: ")); printPanelZones(6, 1); } /* * 0xBB: Bell * Interval: immediate after alarm tripped except silent zones * CRC: yes * Structure decoding: *incomplete * Content decoding: *incomplete * * Byte 2 bit 0-4: Unknown * Byte 2 bit 5: Bell status * Byte 2 bit 6-7: Unknown * Byte 3: Unknown * Byte 4: CRC * * Command CRC * 10111011 0 00100000 00000000 11011011 [0xBB] Bell: on * 10111011 0 00100000 00000101 11100000 [0xBB] Bell: on // PC5015 * 10111011 0 00000000 00000000 10111011 [0xBB] Bell: off * Byte 0 1 2 3 4 */ void dscKeybusInterface::printPanel_0xBB() { stream->print(F("Bell: ")); if (bitRead(panelData[2], 5)) stream->print(F("on")); else stream->print(F("off")); } /* * 0xC3: Keypad and dialer status * Interval: 30s (PC1616/PC1832/PC1864) * CRC: yes * Structure decoding: *incomplete * Content decoding: *incomplete * * Byte 2: bit 0-2 unknown * Byte 2: bit 3 TLM available or communications disabled (no trouble) * Byte 2: bit 4 TLM trouble or dialing attempt (with/without trouble) * Byte 2: bit 5 keypad lockout active * Byte 2: bit 6-7 unknown * Byte 3: Unknown, always observed as 11111111 * Byte 4: CRC * * Command CRC * 11000011 0 00001000 11111111 11001010 [0xC3] Unknown data * 11000011 0 00010000 11111111 11010010 [0xC3] Unknown data * 11000011 0 00110000 11111111 11110010 [0xC3] Keypad lockout * 11000011 0 00000000 11111111 11000010 [0xC3] Keypad ready * Byte 0 1 2 3 4 */ void dscKeybusInterface::printPanel_0xC3() { if (panelData[3] == 0xFF) { stream->print(F("TLM: ")); if (panelData[2] & 0x10) stream->print(F("trouble/attempt")); else stream->print(F("available/disabled")); if (panelData[2] & 0x08) stream->print(F(" | Dialer call attempt")); if (panelData[2] & 0x20) stream->print(F(" | Keypad lockout")); } else printUnknownData(); } /* * 0xCE: Panel status * CRC: yes * Structure decoding: *incomplete * Content decoding: *incomplete * * Byte 2: Unknown * Byte 3 bit 0-1: Selects set of status commands * Byte 3 bit 2-7: Unknown * Byte 4: Status, printPanelStatus0...printPanelStatus2 * Byte 5: Unknown * Byte 6: Unknown * Byte 7: CRC * * Command Status CRC * 11001110 0 00100000 00000000 11101001 00000000 00000000 11010111 [0xCE] Bell trouble * 11001110 0 00100000 00011101 10001100 00000000 00000000 10010111 [0xCE] Zone fault: 1 * 11001110 0 00100000 10001100 01010000 00000000 00000000 11001010 [0xCE] Keypad Panic alarm * Byte 0 1 2 3 4 5 6 7 * * Command Unknown CRC * 11001110 0 00000001 10100000 00000000 00000000 00000000 01101111 [0xCE] Unknown data [Byte 2/0x01] // Partition 1 exit delay * 11001110 0 00000001 10110001 00000000 00000000 00000000 10000000 [0xCE] Unknown data [Byte 2/0x01] // Partition 1 armed stay * 11001110 0 00000001 10110011 00000000 00000000 00000000 10000010 [0xCE] Unknown data [Byte 2/0x01] // Partition 1 armed away * 11001110 0 00000001 10100100 00000000 00000000 00000000 01110011 [0xCE] Unknown data [Byte 2/0x01] // Partition 2 armed away * 11001110 0 01000000 11111111 11111111 11111111 11111111 00001010 [0xCE] Unknown data [Byte 2/0x40] // Unknown data * 11001110 0 01000000 11111111 11111111 11111111 11111111 00001010 [0xCE] Unknown data [Byte 2/0x40] // LCD: System is in Alarm * Byte 0 1 2 3 4 5 6 7 */ void dscKeybusInterface::printPanel_0xCE() { if (panelData[2] & 0x20) { switch (panelData[3] & 0x03) { case 0x00: printPanelStatus0(4); return; case 0x01: printPanelStatus1(4); return; case 0x02: printPanelStatus2(4); return; case 0x03: printPanelStatus3(4); return; } } else { printUnknownData(); stream->print(F(" [Byte 2/0x")); if (panelData[2] < 16) stream->print("0"); stream->print(panelData[2], HEX); stream->print(F("] ")); } } /* * 0xD5: Keypad zone query * CRC: no * Structure decoding: complete * Content decoding: complete * * Bytes 2-9: 1010101010 * * 11111111 1 11111111 11111111 11111111 11111011 [Module/0x05] Keypad zone status notification * 11010101 0 10101010 10101010 10101010 10101010 10101010 10101010 10101010 10101010 [0xD5] Keypad zone query * 11111111 1 11111111 11111111 11111111 11111111 11111111 11111111 11111111 00001111 [Module/0xD5] [Keypad] Slot 8 zone open * Byte 0 1 2 3 4 5 6 7 8 9 */ void dscKeybusInterface::printPanel_0xD5() { stream->print(F("Keypad zone query")); } /* * 0xE6: Extended status, partitions 1-8 * Panels: PC5020, PC1616, PC1832, PC1864 * * 0xE6 commands are split into multiple subcommands to handle up to 8 partitions/64 zones. * * Byte 2: Subcommand */ void dscKeybusInterface::printPanel_0xE6() { switch (panelData[2]) { case 0x08: case 0x0A: case 0x0C: case 0x0E: break; // Skips panel commands without CRC data default: { // Checks remaining panel commands if (!validCRC()) { stream->print(F("[CRC Error]")); return; } } } switch (panelData[2]) { case 0x01: case 0x02: case 0x03: case 0x04: case 0x05: case 0x06: case 0x20: case 0x21: printPanel_0xE6_0x01_06_20_21(); break; // Partitions 1-8 status in programming | Structure: *incomplete | Content: *incomplete case 0x08: case 0x0A: case 0x0C: case 0x0E: printPanel_0xE6_0x08_0A_0C_0E(); break; // Zone expander 4-7 query | Structure: complete | Content: complete case 0x09: printPanel_0xE6_0x09(); break; // Zones 33-40 status | Structure: complete | Content: complete case 0x0B: printPanel_0xE6_0x0B(); break; // Zones 41-48 status | Structure: complete | Content: complete case 0x0D: printPanel_0xE6_0x0D(); break; // Zones 49-56 status | Structure: complete | Content: complete case 0x0F: printPanel_0xE6_0x0F(); break; // Zones 57-64 status | Structure: complete | Content: complete case 0x17: printPanel_0xE6_0x17(); break; // Flash panel lights: status and zones 1-32, partitions 1-8 | Structure: complete | Content: complete case 0x18: printPanel_0xE6_0x18(); break; // Flash panel lights: status and zones 33-64, partitions 1-8 | Structure: complete | Content: complete case 0x19: printPanel_0xE6_0x19(); break; // Beep, partitions 3-8 | Structure: complete | Content: complete case 0x1A: printPanel_0xE6_0x1A(); break; // Panel status | Structure: *incomplete | Content: *incomplete case 0x1D: printPanel_0xE6_0x1D(); break; // Tone, partitions 3-8 | Structure: complete | Content: complete case 0x1F: printPanel_0xE6_0x1F(); break; // Buzzer, partitions 3-8 | Structure: complete | Content: complete case 0x2B: printPanel_0xE6_0x2B(); break; // Enabled zones 1-32, partitions 1-8 | Structure: complete | Content: complete case 0x2C: printPanel_0xE6_0x2C(); break; // Enabled zones 33-64, partitions 1-8 | Structure: complete | Content: complete case 0x41: printPanel_0xE6_0x41(); break; // Status in access code programming, zone lights 65-95| Structure: *incomplete | Content: *incomplete default: stream->print("Unknown data"); } } /* * 0xE6.01 - 0xE6.06: Status in alarm/programming, partitions 1-8 * CRC: yes * Structure decoding: *incomplete * Content decoding: *incomplete * * Command Subcommand Lights Status Zones33+ Zones41+ Zones49+ Zones57+ CRC * 11100110 0 00000001 10000010 11100100 00000000 00000000 00000000 00000000 00000000 01001101 [0xE6.01] Partition 3: Armed Backlight - *8: Installer programming * 11100110 0 00000010 10000010 11100100 00000000 00000000 00000000 00000000 00000000 01001110 [0xE6.02] Partition 4: Armed Backlight - *8: Installer programming * 11100110 0 00000011 10000001 11111000 00000000 00000000 00000000 00000000 00000000 01100010 [0xE6.03] Partition 5: Ready Backlight - Keypad programming * 11100110 0 00000100 10000010 11100100 00000000 00000000 00000000 00000000 00000000 01010000 [0xE6.04] Partition 6: Armed Backlight - *8: Installer programming * 11100110 0 00000101 10000010 11100100 00000000 00000000 00000000 00000000 00000000 01010001 [0xE6.05] Partition 7: Armed Backlight - *8: Installer programming * 11100110 0 00000110 10000010 11100100 00000000 00000000 00000000 00000000 10000000 11010010 [0xE6.06] Partition 8: Armed Backlight - *8: Installer programming * 11100110 0 00100000 10000000 10011110 00000000 00000000 00000000 00000000 10000000 10100100 [0xE6.20] Partition 1: Backlight - Enter * function code | Zone lights: none * 11100110 0 00100000 10000000 10011111 00000000 00000000 00000000 00000000 10000000 10100101 [0xE6.20] Partition 1: Backlight - Enter access code | Zone lights: none * 11100110 0 00100000 10000001 11111000 00000000 00000000 00000000 00000000 10000000 11111111 [0xE6.20] Partition 1: Ready Backlight - Keypad programming | Zone lights: none * 11100110 0 00100000 10000010 10100110 10000000 00000001 00000000 00000000 10000000 00101111 [0xE6.20] Partition 1: Armed Backlight - *5: Access codes | Zones 33-64 lights: 40 41 * Byte 0 1 2 3 4 5 6 7 8 9 10 */ void dscKeybusInterface::printPanel_0xE6_0x01_06_20_21() { byte partition = 0; switch(panelData[2]) { case 0x01: partition = 3; break; case 0x02: partition = 4; break; case 0x03: partition = 5; break; case 0x04: partition = 6; break; case 0x05: partition = 7; break; case 0x06: partition = 8; break; case 0x20: partition = 1; break; case 0x21: partition = 2; break; } printPanelPartitionStatus(partition, 4, 4); if (panelData[9] & 0x80) { printZoneLights(false); printPanelZones(5, 33); } else { printZoneLights(); printPanelZones(5,1); } } /* * 0xE6.08,0A,0C,0E: Zone expander 4-7 query * Interval: immediate after zone expander status notification * CRC: no * Structure decoding: complete * Content decoding: complete * * Bytes 3-8: 11111111 * * 11111111 1 11111111 11111111 11111111 11111111 11111111 01111111 11111111 11111111 [Module/0x05] Zone expander notification: 4 * 11100110 0 00001000 11111111 11111111 11111111 11111111 11111111 11111111 [0xE6.08] Zone expander query: 4 * 11111111 1 11111111 11000011 11001111 11111111 11111111 10101111 11111111 [Module/0xE6] Zone expander: 4 | Zones changed: 34 open * * 11111111 1 11111111 11111111 11111111 11111111 11111111 10111111 11111111 11111111 [Module/0x05] Zone expander notification: 5 * 11100110 0 00001010 11111111 11111111 11111111 11111111 11111111 11111111 [0xE6.0A] Zone expander query: 5 * 11111111 1 11111111 11000011 11001111 11111111 11111111 10101111 11111111 [Module/0xE6] Zone expander: 5 | Zones changed: 42 open * * 11111111 1 11111111 11111111 11111111 11111111 11111111 11011111 11111111 11111111 [Module/0x05] Zone expander notification: 6 * 11100110 0 00001100 11111111 11111111 11111111 11111111 11111111 11111111 [0xE6.0C] Zone expander query: 6 * 11111111 1 11111111 11000011 11001111 11111111 11111111 10101111 11111111 [Module/0xE6] Zone expander: 6 | Zones changed: 50 open * * 11111111 1 11111111 11111111 11111111 11111111 11111111 11101111 11111111 11111111 [Module/0x05] Zone expander notification: 7 * 11100110 0 00001110 11111111 11111111 11111111 11111111 11111111 11111111 [0xE6.0E] Zone expander query: 7 * 11111111 1 11111111 11000011 11001111 11111111 11111111 10101111 11111111 [Module/0xE6] Zone expander: 7 | Zones changed: 58 open * Byte 0 1 2 3 4 5 6 7 8 */ void dscKeybusInterface::printPanel_0xE6_0x08_0A_0C_0E() { byte expander = 0; switch (panelData[2]) { case 0x08: expander = 4; break; case 0x0A: expander = 5; break; case 0x0C: expander = 6; break; case 0x0E: expander = 7; break; } stream->print(F("Zone expander query: ")); stream->print(expander); } /* * 0xE6.09: Zones 33-40 status * CRC: yes * Structure decoding: complete * Content decoding: complete * * Byte 3 bit 0-7: Zone 33-40 * Byte 4: CRC * * Command Subcommand Zones33+ CRC * 11100110 0 00001001 00000000 11101111 [0xE6.09] Zones 33-40 open: none * Byte 0 1 2 3 4 */ void dscKeybusInterface::printPanel_0xE6_0x09() { stream->print(F("Zones 33-40 open: ")); printPanelBitNumbers(3, 33); } /* * 0xE6.0B: Zones 41-48 status * CRC: yes * Structure decoding: complete * Content decoding: complete * * Byte 3 bit 0-7: Zone 41-48 * Byte 4: CRC * * Command Subcommand Zones41+ CRC * 11100110 0 00001011 00000000 11110001 [0xE6.0B] Zones 41-48 open: none * Byte 0 1 2 3 4 */ void dscKeybusInterface::printPanel_0xE6_0x0B() { stream->print(F("Zones 41-48 open: ")); printPanelBitNumbers(3, 41); } /* * 0xE6.0D: Zones 49-56 status * CRC: yes * Structure decoding: complete * Content decoding: complete * * Byte 3 bit 0-7: Zone 49-56 * Byte 4: CRC * * Command Subcommand Zones49+ CRC * 11100110 0 00001101 00000000 11110011 [0xE6.0D] Zones 49-56 open: none * Byte 0 1 2 3 4 */ void dscKeybusInterface::printPanel_0xE6_0x0D() { stream->print(F("Zones 49-56 open: ")); printPanelBitNumbers(3, 49); } /* * 0xE6.0F: Zones 57-64 status * CRC: yes * Structure decoding: complete * Content decoding: complete * * Byte 3 bit 0-7: Zone 57-64 * Byte 4: CRC * * Command Subcommand Zones57+ CRC * 11100110 0 00001111 00000000 11110101 [0xE6.0F] Zones 57-64 open: none * Byte 0 1 2 3 4 */ void dscKeybusInterface::printPanel_0xE6_0x0F() { stream->print(F("Zones 57-64 open: ")); printPanelBitNumbers(3, 57); } /* * 0xE6.17: Flash panel lights: status and zones 1-32, partitions 1-8 * Interval: intermittent * CRC: yes * Structure decoding: complete * Content decoding: complete * * Byte 3: Partition * Byte 4: Status lights flashing * Byte 5: Zones 1-8 * Byte 6: Zones 9-16 * Byte 7: Zones 17-24 * Byte 8: Zones 25-32 * Byte 9: CRC * * Command Subcmd Partition Lights Zones1+ Zones9+ Zones17+ Zones25+ CRC * 11100110 0 00010111 00000100 00000000 00000100 00000000 00000000 00000000 00000101 [0xE6.17] Partition 3 | Status lights flashing: none | Zones 1-32 flashing: 3 * Byte 0 1 2 3 4 5 6 7 8 9 */ void dscKeybusInterface::printPanel_0xE6_0x17() { printPartition(); printPanelBitNumbers(3, 1); printStatusLightsFlashing(); printPanelLights(4, false); stream->print(F("| Zones 1-32 flashing: ")); printPanelZones(5, 1); } /* * 0xE6.18: Flash panel lights: status and zones 33-64, partitions 1-8 * Interval: intermittent * CRC: yes * Structure decoding: complete * Content decoding: complete * * Byte 3: Partition * Byte 4: Status lights flashing * Byte 5: Zones 33-40 * Byte 6: Zones 41-48 * Byte 7: Zones 49-56 * Byte 8: Zones 57-64 * Byte 9: CRC * * Command Subcmd Partition Lights Zones33+ Zones41+ Zones49+ Zones57+ CRC * 11100110 0 00011000 00000001 00000000 00000000 00000000 00000000 00000000 11111111 [0xE6.18] Partition 1 | Status lights flashing: none | Zones 33-64 flashing: none * 11100110 0 00011000 00000001 00000000 00000001 00000000 00000000 00000000 00000000 [0xE6.18] Partition 1 | Status lights flashing: none | Zones 33-64 flashing: 33 * 11100110 0 00011000 00000001 00000100 00000000 00000000 00000000 10000000 10000011 [0xE6.18] Partition 1 | Status lights flashing: Memory | Zones 33-64 flashing: 64 * Byte 0 1 2 3 4 5 6 7 8 9 */ void dscKeybusInterface::printPanel_0xE6_0x18() { printPartition(); printPanelBitNumbers(3, 1); printStatusLightsFlashing(); printPanelLights(4, false); stream->print(F("| Zones 33-64 flashing: ")); printPanelZones(5, 33); } /* * 0xE6.19: Beep, partitions 3-8 * CRC: yes * Structure decoding: complete * Content decoding: complete * * Byte 3: Partition number * Byte 4: Beeps number * Byte 5: CRC * * Command Subcmd Partition Beeps CRC * 11100110 0 00011001 00000100 00000110 00001001 [0xE6.19] Partition 3 | Beep: 3 beeps * 11100110 0 00011001 00001000 00001100 00010011 [0xE6.19] Partition 4 | Beep: 6 beeps * Byte 0 1 2 3 4 5 */ void dscKeybusInterface::printPanel_0xE6_0x19() { printPartition(); printPanelBitNumbers(3, 1); printPanelBeeps(4); } /* * 0xE6.1A: Panel status * CRC: yes * Structure decoding: *incomplete * Content decoding: *incomplete * * Byte 3: Unknown * Byte 4: Partitions in alarm * Byte 5: Unknown * Byte 6 bit 0-2: Unknown * Byte 6 bit 3: Loss of system time status * Byte 6 bit 4: AC power trouble status * Byte 6 bit 5: Unknown * Byte 6 bit 6: Fail to communicate status * Byte 6 bit 7: Fire alarm * Byte 7: Unknown * Byte 8: Unknown * Byte 9: Unknown * Byte 10: CRC * * Command Subcmd Alarm CRC * 11100110 0 00011010 01000000 00000001 00000000 00010001 00000000 00000000 00000000 01010010 [0xE6.1A] Partitions in alarm: 1 | AC power trouble * 11100110 0 00011010 01000000 00000000 00000000 00011001 00000000 00000000 00000000 01011001 [0xE6.1A] Partitions in alarm: none | Loss of system time | AC power trouble * 11100110 0 00011010 01000000 00000000 00000000 00001001 00000000 00000000 00000000 01001001 [0xE6.1A] Partitions in alarm: none | Loss of system time // All partitions exit delay in progress, disarmed * 11100110 0 00011010 01000000 00010001 00000000 00001001 00000000 00000000 00000000 01011010 [0xE6.1A] Partitions in alarm: 1 5 | Loss of system time // Keypad panic alarm * 11100110 0 00011010 01000000 00000010 00000000 00001001 00000000 00000000 00000000 01001011 [0xE6.1A] Partitions in alarm: 2 | Loss of system time * 11100110 0 00011010 01000000 00000001 00000000 00001001 00000000 00000000 00000000 01001010 [0xE6.1A] Partitions in alarm: 1 | Loss of system time * 11100110 0 00011010 01000000 10000000 00000000 00001001 00000000 00000000 00000000 11001001 [0xE6.1A] Partitions in alarm: 8 | Loss of system time * Byte 0 1 2 3 4 5 6 7 8 9 10 */ void dscKeybusInterface::printPanel_0xE6_0x1A() { stream->print(F("Partitions in alarm: ")); printPanelBitNumbers(4, 1); if (panelData[6] & 0x08) stream->print(F("| Loss of system time ")); if (panelData[6] & 0x10) stream->print(F("| AC power trouble ")); if (panelData[6] & 0x40) stream->print(F("| Fail to communicate ")); if (panelData[6] & 0x80) stream->print(F("| Fire alarm ")); } /* * 0xE6.1D: Tone, partitions 3-8 * CRC: yes * Structure decoding: complete * Content decoding: complete * * Byte 3: Partition number * Byte 4: Tone * Byte 5: CRC * * Command Subcmd Partition Tone CRC * 11100110 0 00011101 00000100 00000000 00000111 [0xE6.1D] Partition 3 | Tone: off * 11100110 0 00011101 00001000 10000000 10001011 [0xE6.1D] Partition 4 | Tone: constant tone * Byte 0 1 2 3 4 5 */ void dscKeybusInterface::printPanel_0xE6_0x1D() { printPartition(); printPanelBitNumbers(3, 1); printPanelTone(4); } /* * 0xE6.1F: Buzzer, partitions 3-8 * CRC: yes * Structure decoding: complete * Content decoding: complete * * Byte 3: Partition number * Byte 4: Buzzer pattern * Byte 5: CRC * * Command Subcmd Partition Buzzer CRC * 11100110 0 00011111 00001000 00000001 00001110 [0xE6.1F] Partition 4 | Buzzer: 1s * Byte 0 1 2 3 4 5 */ void dscKeybusInterface::printPanel_0xE6_0x1F() { printPartition(); printPanelBitNumbers(3, 1); printPanelBuzzer(4); } /* * 0xE6.2B: Enabled zones 1-32, partitions 3-8 * Interval: 60s * CRC: yes * Structure decoding: complete * Content decoding: complete * * Byte 3: Partition number * Byte 4: Zones enabled 1-8 * Byte 5: Zones enabled 9-16 * Byte 6: Zones enabled 17-24 * Byte 7: Zones enabled 25-32 * Byte 8: CRC * * Command Subcmd Partition Zones1+ Zones9+ Zones17+ Zones25+ CRC * 11100110 0 00101011 00000100 00000100 00000000 00000000 00000000 00011001 [0xE6.2B] Partition 3 | Enabled zones 1-32: 3 * 11100110 0 00101011 00001000 00001000 00000000 00000000 00000000 00100001 [0xE6.2B] Partition 4 | Enabled zones 1-32: 4 * Byte 0 1 2 3 4 5 6 7 8 */ void dscKeybusInterface::printPanel_0xE6_0x2B() { printPartition(); printPanelBitNumbers(3, 1); stream->print(F("| Enabled zones 1-32: ")); printPanelZones(4, 1); } /* * 0xE6.2C: Enabled zones 33-64, partitions 1-8 * Interval: 60s * CRC: yes * Structure decoding: complete * Content decoding: complete * * Byte 3: Partition number * Byte 4: Zones enabled 33-40 * Byte 5: Zones enabled 41-48 * Byte 6: Zones enabled 49-56 * Byte 7: Zones enabled 57-64 * Byte 8: CRC * * Command Subcmd Partition Zones33+ Zones41+ Zones49+ Zones57+ CRC * 11100110 0 00101100 00000001 00000000 00000000 00000000 00000000 00010011 [0xE6.2C] Partition 1 | Enabled zones 33-64: none * 11100110 0 00101100 00000010 00000000 00000000 00000000 00000000 00010100 [0xE6.2C] Partition 2 | Enabled zones 33-64: none * Byte 0 1 2 3 4 5 6 7 8 */ void dscKeybusInterface::printPanel_0xE6_0x2C() { printPartition(); printPanelBitNumbers(3, 1); stream->print(F("| Enabled zones 33-64: ")); printPanelZones(4, 33); } /* * 0xE6.41: Status in programming, zone lights 65-95 * CRC: yes * Structure decoding: *incomplete * Content decoding: *incomplete * * (log data samples needed) */ void dscKeybusInterface::printPanel_0xE6_0x41() { printStatusLights(); printPanelLights(3); printZoneLights(); printPanelZones(5, 65); } /* * 0xEB: Date, time, system status messages - partitions 1-8 * CRC: yes * Structure decoding: *incomplete * Content decoding: *incomplete * * Byte 2: Partition * Byte 3 bit 0-3: Year digit 2 * Byte 3 bit 4-7: Year digit 1 * Byte 4 bit 0-1: Day digit part 1 * Byte 4 bit 2-5: Month * Byte 4 bit 6-7: Unknown * Byte 5 bit 0-4: Hour * Byte 5 bit 5-7: Day digit part 2 * Byte 6 bit 0-1: Unknown * Byte 6 bit 2-7: Minute * Byte 7: Selects set of status commands * Byte 8: Status, printPanelStatus0...printPanelStatus1X * Byte 9: Unknown * Byte 10: CRC * * Partition YYY1YYY2 MMMMDD DDDHHHHH MMMMMM Status CRC * 11101011 0 00000001 00011000 00011000 10001010 00101100 00000000 10111011 00000000 10001101 [0xEB] 2018.06.04 10:11 | Partition 1 | Armed by master code 40 * 11101011 0 00000001 00011000 00011000 10001010 00111000 00000000 10111011 00000000 10011001 [0xEB] 2018.06.04 10:14 | Partition 1 | Armed by master code 40 * 11101011 0 00000001 00011000 00011000 10001010 00111000 00000010 10011011 00000000 01111011 [0xEB] 2018.06.04 10:14 | Partition 1 | Armed: away * 11101011 0 00000001 00011000 00011000 10001010 00110100 00000000 11100010 00000000 10111100 [0xEB] 2018.06.04 10:13 | Partition 1 | Disarmed by master code 40 * 11101011 0 00000001 00011000 00011000 10001111 00101000 00000100 00000000 10010001 01101000 [0xEB] 2018.06.04 15:10 | Partition 1 | Zone alarm: 33 * 11101011 0 00000001 00000001 00000100 01100000 00010100 00000100 01000000 10000001 00101010 [0xEB] 2001.01.03 00:05 | Partition 1 | Zone tamper: 33 * 11101011 0 00000001 00000001 00000100 01100000 00001000 00000100 01011111 10000001 00111101 [0xEB] 2001.01.03 00:02 | Partition 1 | Zone tamper: 64 * 11101011 0 00000001 00000001 00000100 01100000 00011000 00000100 01100000 11111111 11001100 [0xEB] 2001.01.03 00:06 | Partition 1 | Zone tamper restored: 33 * 11101011 0 00000000 00000001 00000100 01100000 01001000 00010100 01100000 10000001 10001101 [0xEB] 2001.01.03 00:18 | Zone fault: 33 * 11101011 0 00000000 00000001 00000100 01100000 01001100 00010100 01000000 11111111 11101111 [0xEB] 2001.01.03 00:19 | Zone fault restored: 33 * 11101011 0 00000000 00000001 00000100 01100000 00001100 00010100 01011111 11111111 11001110 [0xEB] 2001.01.03 00:03 | Zone fault restored: 64 * 11101011 0 00000001 00011000 00011000 00100000 01101100 00010111 00100010 00000000 11100001 [0xEB] 2018.06.01 00:27 | Partition 1 | // Unknown data, immediate after entering *2 menu * Byte 0 1 2 3 4 5 6 7 8 9 10 */ void dscKeybusInterface::printPanel_0xEB() { printPanelTime(3); if (panelData[2] == 0) stream->print(" | "); else { stream->print(F(" | Partition ")); printPanelBitNumbers(2, 1); stream->print("| "); } switch (panelData[7]) { case 0x00: printPanelStatus0(8); return; case 0x01: printPanelStatus1(8); return; case 0x02: printPanelStatus2(8); return; case 0x03: printPanelStatus3(8); return; case 0x04: printPanelStatus4(8); return; case 0x05: printPanelStatus5(8); return; case 0x14: printPanelStatus14(8); return; case 0x16: printPanelStatus16(8); return; case 0x17: printPanelStatus17(8); return; case 0x18: printPanelStatus18(8); return; case 0x1B: printPanelStatus1B(8); return; } printUnknownData(); } /* * 0xEC: Event buffer - partitions 1-8 * CRC: yes * Structure decoding: *incomplete * Content decoding: *incomplete * * Byte 2: Partition * Byte 3 bit 0-3: Year digit 2 * Byte 3 bit 4-7: Year digit 1 * Byte 4 bit 0-1: Day digit part 1 * Byte 4 bit 2-5: Month * Byte 4 bit 6-7: Event number multiplier (* 256) * Byte 5 bit 0-4: Hour * Byte 5 bit 5-7: Day digit part 2 * Byte 6 bit 0-1: Unknown * Byte 6 bit 2-7: Minute * Byte 7: Selects set of status commands * Byte 8: Status, printPanelStatus0...printPanelStatus1X * Byte 9: Event number * Byte 10: CRC * * Partition YYY1YYY2 MMMMDD DDDHHHHH MMMMMM Status Event# CRC * 11101100 0 00000000 00100000 00101101 01100011 10111100 00000001 10101100 00001011 00010000 [0xEC] Event: 011 | 2020.11.11 03:47 | Exit *8 programming * 11101100 0 00000000 00100000 00110000 00100000 00000000 00000011 00001010 00001001 01110010 [0xEC] Event: 009 | 2020.12.01 00:00 | PC5204: Supervisory trouble * 11101100 0 00000000 00010110 00011000 10100001 01000000 00000010 10010001 11111100 10001010 [0xEC] Event: 252 | 2016.06.05 01:16 | Swinger shutdown * 11101100 0 00000000 00010110 01011000 10100001 00101000 00000010 10010001 00000100 10111010 [0xEC] Event: 260 | 2016.06.05 01:10 | Swinger shutdown * 11101100 0 00000000 00001011 01000100 00100000 00000000 11111111 11111111 01110100 11001101 [0xEC] Event: 372 | 200B.01.01 00:00 | No entry * Byte 0 1 2 3 4 5 6 7 8 9 10 * */ void dscKeybusInterface::printPanel_0xEC() { int eventNumber = panelData[9] + ((panelData[4] >> 6) * 256); stream->print(F("Event: ")); if (eventNumber < 10) stream->print("00"); else if (eventNumber < 100) stream->print("0"); stream->print(eventNumber); stream->print(" | "); printPanelTime(3); stream->print(" | "); if (panelData[2] != 0) { printPartition(); printPanelBitNumbers(2, 1); stream->print("| "); } switch (panelData[7]) { case 0x00: printPanelStatus0(8); return; case 0x01: printPanelStatus1(8); return; case 0x02: printPanelStatus2(8); return; case 0x03: printPanelStatus3(8); return; case 0x04: printPanelStatus4(8); return; case 0x05: printPanelStatus5(8); return; case 0x14: printPanelStatus14(8); return; case 0x16: printPanelStatus16(8); return; case 0x17: printPanelStatus17(8); return; case 0x18: printPanelStatus18(8); return; case 0x1B: printPanelStatus1B(8); return; case 0xFF: stream->print(F("No entry")); return; } printUnknownData(); } /* * Keypad: Fire alarm * Structure decoding: complete * Content decoding: complete * * Byte 0: 10111011 * * 10111011 1 11111111 11111111 11111111 11111111 11111111 11111111 [Keypad] Fire alarm */ void dscKeybusInterface::printModule_0xBB() { stream->print(F("[Keypad] Fire alarm")); } /* * Keypad: Auxiliary alarm * Structure decoding: complete * Content decoding: complete * * Byte 0: 11011101 * * 11011101 1 11111111 11111111 11111111 11111111 11111111 11111111 [Keypad] Aux alarm */ void dscKeybusInterface::printModule_0xDD() { stream->print(F("[Keypad] Auxiliary alarm")); } /* * Keypad: Panic alarm * Structure decoding: complete * Content decoding: complete * * Byte 0: 11101110 * * 11101110 1 11111111 11111111 11111111 11111111 11111111 11111111 [Keypad] Panic alarm */ void dscKeybusInterface::printModule_0xEE() { stream->print(F("[Keypad] Panic alarm")); } /* * Module data during panel commands 0x05, 0x0A, 0x1B: Panel status * Structure decoding: *incomplete * Content decoding: *incomplete * * Byte 2: Keypad keys: 0x05/0x0A Partition 1, 0x1B Partition 5 * Byte 3: Keypad keys: 0x05/0x0A Partition 2, 0x1B Partition 6 * Byte 4 bit 0: Module tamper notification, panel response: 0x4C Module tamper query * Byte 4 bit 1-2: Unknown * Byte 4 bit 3: Wireless module battery notification, panel response: 0x41 Wireless module query * Byte 4 bit 4: Zone expander 3 notification, panel response: 0x39 Zone expander 3 query * Byte 4 bit 5: Zone expander 2 notification, panel response: 0x33 Zone expander 2 query * Byte 4 bit 6: Zone expander 1 notification, panel response: 0x28 Zone expander 1 query * Byte 4 bit 7: Zone expander 0 notification, panel response: 0x22 Zone expander 0 query * Byte 5 bit 0: Unknown * Byte 5 bit 1: Wireless module unknown notification, panel response: 0xE6.25 then Module0xE6 * Byte 5 bit 2: Keypad zone status notification, panel response: 0xD5 Keypad zone query * Byte 5 bit 3-4: Unknown * Byte 5 bit 5: Module status notification, panel response: 0x58 Module status query * Byte 5 bit 6-7: Unknown * * Later generation panels: * Byte 6: Unknown * Byte 7 bit 0-2: Unknown * Byte 7 bit 3: Keypad idle notification, panel response: 0x1B, keypad responds on byte 4 with its partition number * Byte 7 bit 4: Zone expander 7 notification, panel response: 0xE6.0E Zone expander 7 query * Byte 7 bit 5: Zone expander 6 notification, panel response: 0xE6.0C Zone expander 6 query * Byte 7 bit 6: Zone expander 5 notification, panel response: 0xE6.0A Zone expander 5 query * Byte 7 bit 7: Zone expander 4 notification, panel response: 0xE6.08 Zone expander 4 query * Byte 8: Keypad keys: 0x05/0x0A Partition 3, 0x1B Partition 7 * Byte 9: Keypad keys: 0x05/0x0A Partition 4, 0x1B Partition 8 * * 00000101 0 10000001 00000001 10010001 11000111 [0x05] Partition 1: Ready Backlight - Partition ready | Partition 2: disabled * * Module 1:Keys 2:Keys * 11111111 1 00000101 11111111 11111111 11111111 [Module/0x05] Partition 1 Key: 1 * 11111111 1 11111111 00010001 11111111 11111111 [Module/0x05] Partition 2 Key: 4 * 11111111 1 11111111 11111111 01111111 11111111 [Module/0x05] Zone expander notification: 0 * 11111111 1 11111111 11111111 10111111 11111111 [Module/0x05] Zone expander notification: 1 * 11111111 1 11111111 11111111 11011111 11111111 [Module/0x05] Zone expander notification: 2 * 11111111 1 11111111 11111111 11101111 11111111 [Module/0x05] Zone expander notification: 3 * 11111111 1 11111111 11111111 11110111 11111111 [Module/0x05] Wireless module battery notification * 11111111 1 11111111 11111111 11111110 11111111 [Module/0x05] Module tamper notification * 11111111 1 11111111 11111111 11111111 11011111 [Module/0x05] Module status notification * 11111111 1 11111111 11111111 11111111 11111011 [Module/0x05] Keypad zone notification * Byte 0 1 2 3 4 5 * * Later generation panels: * * Module 1:Keys 2:Keys 3:Keys 4:Keys * 11111111 1 11111111 11111111 11111111 11111111 11111111 01111111 11111111 11111111 [Module/0x05] Zone expander notification: 4 * 11111111 1 11111111 11111111 11111111 11111111 11111111 10111111 11111111 11111111 [Module/0x05] Zone expander notification: 5 * 11111111 1 11111111 11111111 11111111 11111111 11111111 11011111 11111111 11111111 [Module/0x05] Zone expander notification: 6 * 11111111 1 11111111 11111111 11111111 11111111 11111111 11101111 11111111 11111111 [Module/0x05] Zone expander notification: 7 * 11111111 1 11111111 11111111 11111111 11111111 11111111 11110111 11111111 11111111 [Module/0x05] // Unknown notification, observed on PC1832 * Byte 0 1 2 3 4 5 6 7 8 9 * * Module 5:Keys 6:Keys 7:Keys 8:Keys * 11111111 1 00000101 11111111 11111111 11111111 11111111 11111111 11111111 11111111 [Module/0x1B] Partition 5 Key: 1 * Byte 0 1 2 3 4 5 6 7 8 9 */ void dscKeybusInterface::printModule_Status() { bool printedMessage = false; // Keypad keys if (printModule_Keys()) printedMessage = true; // Keypad partition if (moduleCmd == 0x1B && moduleData[4] != 0xFF) { if (printedMessage) stream->print("| "); stream->print(F("Keypad on partition: ")); printModuleSlots(1, 4, 4, 0x80, 0, 1, 0, true); stream->print(F("going idle")); printedMessage = true; } else { // Zone expander notification if ((moduleData[4] & 0xF0) != 0xF0 || (moduleByteCount > 6 && (moduleData[7] & 0xF0) != 0xF0)) { if (printedMessage) stream->print("| "); stream->print(F("Zone expander notification: ")); printedMessage = true; printModuleSlots(0, 4, 4, 0x80, 0x10, 1, 0); if (moduleByteCount > 6) { printModuleSlots(4, 7, 7, 0x80, 0x20, 1, 0); if ((moduleData[7] & 0x10) == 0) printNumberSpace(7); } } // Module tamper notification, panel responds with 0x4C query if ((moduleData[4] & 0x01) == 0) { if (printedMessage) stream->print("| "); stream->print(F("Module tamper notification ")); printedMessage = true; } // Wireless module battery notification if ((moduleData[4] & 0x08) == 0) { if (printedMessage) stream->print("| "); stream->print(F("Wireless module battery notification ")); printedMessage = true; } } // Unknown wireless notification, panel responds with 0xE6.25 then Module0xE6 if ((moduleData[5] & 0x02) == 0) { if (printedMessage) stream->print("| "); stream->print(F("Wireless notification ")); printedMessage = true; } //Keypad zone notification, panel responds with 0xD5 query if ((moduleData[5] & 0x04) == 0) { if (printedMessage) stream->print("| "); stream->print(F("Keypad zone notification ")); printedMessage = true; } // Module status notification, panel responds with 0xD5 query if ((moduleData[5] & 0x20) == 0) { if (printedMessage) stream->print("| "); stream->print(F("Module status notification ")); printedMessage = true; } // Module status notification, panel responds with 0xD5 query if ((moduleData[5] & 0x40) == 0) { if (printedMessage) stream->print("| "); stream->print(F("Wireless key notification ")); printedMessage = true; } //Unknown keypad notification if (moduleByteCount > 6 && (moduleData[7] & 0x08) == 0) { if (printedMessage) stream->print("| "); stream->print(F("Keypad notification ")); printedMessage = true; } if (moduleByteCount > 6 && (moduleData[6] & 0x80) == 0 && (moduleData[6] & 0x60) != 0) { if (printedMessage) stream->print("| "); stream->print(F("Door chime broadcast ")); printedMessage = true; } if (moduleByteCount > 6 && (moduleData[6] & 0x60) == 0) { if (printedMessage) stream->print("| "); stream->print(F("Zone label broadcast ")); printedMessage = true; } if (!printedMessage) printUnknownData(); } /* * Module data during panel command 0x11: Module supervision query * Structure decoding: *incomplete * Content decoding: *incomplete * * Byte 2 bit 0-1: Keypad slot 4 * Byte 2 bit 2-3: Keypad slot 3 * Byte 2 bit 4-5: Keypad slot 2 * Byte 2 bit 6-7: Keypad slot 1 * Byte 3 bit 0-1: Keypad slot 8 * Byte 3 bit 2-3: Keypad slot 7 * Byte 3 bit 4-5: Keypad slot 6 * Byte 3 bit 6-7: Keypad slot 5 * * Early generation panels: * Byte 4 bit 0-3: Zone expander 2 * Byte 4 bit 4-7: Zone expander 1 * Byte 5 bit 0-1: PC5208 PGM module (?) * Byte 5 bit 2-3: PC/RF5132 * Byte 5 bit 4-7: Zone expander 3 * Byte 6 bit 0-5: Unknown * Byte 6 bit 6-7: PC5204 * * 00010001 0 10101010 10101010 10101010 10101010 10101010 [0x11] Module supervision query * * Slots * Module 1 2 3 4 5 6 7 8 9 10 11 * 11111111 1 00111111 11111111 11111111 11111111 11111111 [Module/0x11] Keypad slots: 1 * 11111111 1 11111111 11111100 00001111 11111111 11111111 [Module/0x11] Keypad slots: 8 | Zone expander: 1 * Byte 0 1 2 3 4 5 6 * * Later generation panels: * Byte 4 bit 0-1: Zone expander 4 * Byte 4 bit 2-3: Zone expander 3 * Byte 4 bit 4-5: Zone expander 2 * Byte 4 bit 6-7: Zone expander 1 * Byte 5 bit 0-1: PC5208 PGM module * Byte 5 bit 2-3: PC/RF5132 * Byte 5 bit 4-5: Zone expander 6 * Byte 5 bit 6-7: Zone expander 5 * Byte 6 bit 0-5: Unknown * Byte 6 bit 6-7: PC5204 * Byte 7 bit 0-1: Zone expander 7 * Byte 7 bit 2-7: Unknown * Byte 8: Unknown * * 00010001 0 10101010 10101010 10101010 10101010 10101010 10101010 10101010 [0x11] Module supervision query * * Slots * Module 1 2 3 4 5 6 7 8 9 12 14 16 * 11111111 1 00111111 11111111 00001111 11110011 11111111 11111111 11111111 [Module/0x11] Keypad slots: 1 | Zone expander: 1 2 | PC/RF5132 * 11111111 1 00111111 11111111 11001111 11111111 11111111 11111100 11111111 [Module/0x11] Keypad slots: 1 | Zone expander: 2 7 * 11111111 1 11111111 11111100 00111111 11111111 00111111 11111111 11111111 [Module/0x11] Keypad slots: 8 | Zone expander: 1 | PC5204 * Byte 0 1 2 3 4 5 6 7 8 */ void dscKeybusInterface::printModule_0x11() { if (moduleData[2] != 0xFF || moduleData[3] != 0xFF) { stream->print(F("Keypad slots: ")); printModuleSlots(1, 2, 3, 0xC0, 0, 2, 0); } if (moduleData[4] != 0xFF || (moduleData[5] & 0xF0) != 0xF0 || ((moduleByteCount > 7) && (moduleData[7] != 0xFF))) { stream->print(F("| Zone expander: ")); // Later generation panel slots if (moduleByteCount > 7) { printModuleSlots(1, 4, 5, 0xC0, 0x30, 2, 0); if ((moduleData[7] & 0x03) == 0) printNumberSpace(7); } // Early generation panel slots else { printModuleSlots(1, 4, 5, 0xF0, 0xF0, 4, 0); } } if ((moduleData[5] & 0x0C) == 0) stream->print(F("| PC/RF5132 ")); if ((moduleData[5] & 0x03) == 0) stream->print(F("| PC5208 ")); if ((moduleData[6] & 0xC0) == 0) stream->print(F("| PC5204 ")); } /* * Module data during panel command 0x41: Wireless module query * Structure decoding: *incomplete * Content decoding: *incomplete * * Byte 2: Wireless battery low zones 1-8 * Byte 3: Wireless battery low zones 9-16 * Byte 4: Wireless battery low zones 17-24 * Byte 5: Wireless battery low zones 25-32 * Byte 6: Wireless battery restored zones 1-8 * Byte 7: Wireless battery restored zones 9-16 * Byte 8: Wireless battery restored zones 17-24 * Byte 9: Wireless battery restored zones 25-32 * Byte 10: Unknown * * 11111111 1 11111111 11111111 11110111 11111111 [Module/0x05] Wireless module battery notification * 01000001 0 11111111 11111111 11111111 11111111 11111111 11111111 11111111 11111111 11111111 [0x41] Wireless module query * * Module Zones1+ Zones9+ Zones17+ Zones25+ Zones1+ Zones9+ Zones17+ Zones25+ * 11111111 1 11111111 11011111 11111111 11111111 11111111 11111111 11111111 11111111 11011000 [Module/0x41] Wireless module | Battery low zones: 11 * 11111111 1 11111111 11111111 11111111 11111111 11111111 11011111 11111111 11111111 11011000 [Module/0x41] Wireless module | Battery restored zones: 11 * Byte 0 1 2 3 4 5 6 7 8 9 10 */ void dscKeybusInterface::printModule_0x41() { stream->print(F("Wireless module ")); if (printModuleSlots(255, 2, 5, 0x80, 0, 1, 0)) { stream->print(F("| Battery low zones: ")); printModuleSlots(1, 2, 5, 0x80, 0, 1, 0); } if (printModuleSlots(255, 6, 9, 0x80, 0, 1, 0)) { stream->print(F("| Battery restored zones: ")); printModuleSlots(1, 6, 9, 0x80, 0, 1, 0); } } /* * Module data during panel command 0x4C: Module tamper query * Structure decoding: *incomplete * Content decoding: *incomplete * * Bits 0-3 or 4-7 "0000" indicates a module is still tampered since a previous notification * * Byte 2-5 bit 0-1: Keypad slot 2,4,6,8 tamper restore * Byte 2-5 bit 2-3: Keypad slot 2,4,6,8 tamper * Byte 2-5 bit 4-5: Keypad slot 1,3,5,7 tamper restore * Byte 2-5 bit 6-7: Keypad slot 1,3,5,7 tamper * Byte 6-8 bit 0-1: Module slot 10,12,14 tamper restore * Byte 6-8 bit 2-3: Module slot 10,12,14 tamper * Byte 6-8 bit 4-5: Module slot 9,11,13 tamper restore * Byte 6-8 bit 6-7: Module slot 9,11,13 tamper * Byte 9 bit 0-1: PC5208 tamper restore * Byte 9 bit 2-3: PC5208 tamper * Byte 9 bit 4-5: RF5132 tamper restore * Byte 9 bit 6-7: RF5132 tamper * Byte 10 bit 0-3: Unknown * Byte 10 bit 4-5: PC5204 tamper restore * Byte 10 bit 6-7: PC5204 tamper * Byte 11: Unknown * Byte 12: Unknown * * Later generation panels: * Byte 13 bit 0-3: Unknown * Byte 13 bit 4-5: Module slot 16 tamper restore * Byte 13 bit 6-7: Module slot 16 tamper * Byte 14: Unknown * * 11111111 1 11111111 11111111 11111110 11111111 [Module/0x05] Module tamper notification * 01001100 0 10101010 10101010 10101010 10101010 10101010 10101010 10101010 10101010 10101010 10101010 10101010 [0x4C] Module tamper query * * Module Slots:1 2 3 4 5 6 7 8 9 10 11 12 13 14 * 11111111 1 00111111 11111111 11111111 11111111 11111111 11111111 11111111 11111111 11111111 11111111 11111111 [Module/0x4C] Keypad tamper: Slot 1 * 11111111 1 11001111 11111111 11111111 11111111 11111111 11111111 11111111 11111111 11111111 11111111 11111111 [Module/0x4C] Keypad tamper restored: Slot 1 * 11111111 1 11110011 11111111 11111111 11111111 11111111 11111111 11111111 11111111 11111111 11111111 11111111 [Module/0x4C] Keypad tamper: Slot 2 * 11111111 1 11111100 11111111 11111111 11111111 11111111 11111111 11111111 11111111 11111111 11111111 11111111 [Module/0x4C] Keypad tamper restored: Slot 2 * 11111111 1 11111111 11001111 11111111 11111111 11111111 11111111 11111111 11111111 11111111 11111111 11111111 [Module/0x4C] Keypad tamper restored: Slot 3 * 11111111 1 11111111 11111111 11110011 11111111 11111111 11111111 11111111 11111111 11111111 11111111 11111111 [Module/0x4C] Keypad tamper: Slot 6 * 11111111 1 11111111 11111111 11111111 11110011 11111111 11111111 11111111 11111111 11111111 11111111 11111111 [Module/0x4C] Keypad tamper: Slot 8 * 11111111 1 11111111 11111111 11111111 11111100 11111111 11111111 11111111 11111111 11111111 11111111 11111111 [Module/0x4C] Keypad tamper restored: Slot 8 * 11111111 1 11111111 11111111 11111111 11111111 11111111 11111111 11111111 00111111 11111111 11111111 11111111 [Module/0x4C] RF5132: Tamper * 11111111 1 11111111 11111111 11111111 11111111 11111111 11111111 11111111 11001111 11111111 11111111 11111111 [Module/0x4C] RF5132: Tamper restored * Byte 0 1 2 3 4 5 6 7 8 9 10 11 12 * * Later generation panels: * 11111111 1 11111111 11111111 11111110 11111111 11111111 11111111 11111111 11111111 [Module/0x05] Module tamper notification * 01001100 0 10101010 10101010 10101010 10101010 10101010 10101010 10101010 10101010 10101010 10101010 10101010 10101010 10101010 [0x4C] Module tamper query * * Module Slots:1 2 3 4 5 6 7 8 9 10 11 12 13 14 16 * 11111111 1 11111111 11111111 11111111 11111111 00111111 11111111 11111111 11111111 11111111 11111111 11111111 11111111 11111111 [Module/0x4C] Module tamper: Slot 9 * 11111111 1 11111111 11111111 11111111 11111111 11001111 11111111 11111111 11111111 11111111 11111111 11111111 11111111 11111111 [Module/0x4C] Module tamper restored: Slot 9 * 11111111 1 11111111 11111111 11111111 11111111 11110011 11111111 11111111 11111111 11111111 11111111 11111111 11111111 11111111 [Module/0x4C] Module tamper: Slot 10 * 11111111 1 11111111 11111111 11111111 11111111 11111100 11111111 11111111 11111111 11111111 11111111 11111111 11111111 11111111 [Module/0x4C] Module tamper restored: Slot 10 * 11111111 1 11111111 11111111 11111111 11111111 11111111 11111111 11110011 11111111 11111111 11111111 11111111 11111111 11111111 [Module/0x4C] Module tamper: Slot 14 * 11111111 1 11111111 11111111 11111111 11111111 11111111 11111111 11111100 11111111 11111111 11111111 11111111 11111111 11111111 [Module/0x4C] Module tamper restored: Slot 14 * 11111111 1 11111111 11111111 11111111 11111111 11111111 11111111 11111111 11111111 11111111 11111111 11111111 00111111 11111111 [Module/0x4C] Module tamper: Slot 16 * 11111111 1 11111111 11111111 11111111 11111111 11111111 11111111 11111111 11111111 11111111 11111111 11111111 11001111 11111111 [Module/0x4C] Module tamper restored: Slot 16 * 11111111 1 11111111 11111111 11111111 11111111 11111111 00001111 11111111 00111111 11111111 11111111 11111111 11111111 11111111 [Module/0x4C] Module tamper: Slot 11 | RF5132: Tamper * 11111111 1 11111111 11111111 11111111 11111111 11111111 11111111 11111111 11001111 11111111 11111111 11111111 11111111 11111111 [Module/0x4C] RF5132: Tamper restored * 11111111 1 11111111 11111111 11111111 11111111 11111111 11111111 11111111 11110011 11111111 11111111 11111111 11111111 11111111 [Module/0x4C] PC5208: Tamper * 11111111 1 11111111 11111111 11111111 11111111 11111111 11111111 11111111 11111100 11111111 11111111 11111111 11111111 11111111 [Module/0x4C] PC5208: Tamper restored * 11111111 1 11111111 11111111 11111111 11111111 11111111 11111111 11111111 11111111 00111111 11111111 11111111 11111111 11111111 [Module/0x4C] PC5204: Tamper * 11111111 1 11111111 11111111 11111111 11111111 11111111 11111111 11111111 11111111 11001111 11111111 11111111 11111111 11111111 [Module/0x4C] PC5204: Tamper restored * 11111111 1 00001111 11111111 11111111 11111111 11111111 00001111 11111111 00110000 11111111 11111111 11111111 11111111 11111111 [Module/0x4C] Keypad tamper: Slot 1 | Module tamper: Slot 11 | RF5132: Tamper | PC5208: Tamper * Byte 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 */ void dscKeybusInterface::printModule_0x4C() { bool printedMessage = false; if (printModuleSlots(255, 2, 5, 0xC0, 0, 4, 0)) { stream->print(F("Keypad tamper: Slot ")); printModuleSlots(1, 2, 5, 0xC0, 0, 4, 0); printedMessage = true; } if (printModuleSlots(255, 2, 5, 0xF0, 0, 4, 0x0C)) { if (printedMessage) stream->print("| "); stream->print(F("Keypad tamper restored: Slot ")); printModuleSlots(1, 2, 5, 0xF0, 0, 4, 0x0C); printedMessage = true; } if (printModuleSlots(255, 6, 8, 0xC0, 0, 4, 0) || (moduleByteCount > 13 && (moduleData[13] & 0xC0) == 0)) { if (printedMessage) stream->print("| "); stream->print(F("Module tamper: Slot ")); printModuleSlots(9, 6, 8, 0xC0, 0, 4, 0); if (moduleByteCount > 13 && (moduleData[13] & 0xC0) == 0) printNumberSpace(16); printedMessage = true; } if (printModuleSlots(255, 6, 8, 0xF0, 0, 4, 0x0C) || (moduleByteCount > 13 && (moduleData[13] & 0xF0) == 0xC0)) { if (printedMessage) stream->print("| "); stream->print(F("Module tamper restored: Slot ")); printModuleSlots(9, 6, 8, 0xF0, 0, 4, 0x0C); if (moduleByteCount > 13 && (moduleData[13] & 0xF0) == 0xC0) printNumberSpace(16); printedMessage = true; } if ((moduleData[9] & 0xC0) == 0) { if (printedMessage) stream->print("| "); stream->print(F("RF5132: Tamper ")); printedMessage = true; } if ((moduleData[9] & 0xF0) == 0xC0) { if (printedMessage) stream->print("| "); stream->print(F("RF5132: Tamper restored ")); printedMessage = true; } if ((moduleData[9] & 0x0C) == 0) { if (printedMessage) stream->print("| "); stream->print(F("PC5208: Tamper ")); printedMessage = true; } if ((moduleData[9] & 0x0F) == 0x0C) { if (printedMessage) stream->print("| "); stream->print(F("PC5208: Tamper restored ")); printedMessage = true; } if ((moduleData[10] & 0xC0) == 0) { if (printedMessage) stream->print("| "); stream->print(F("PC5204: Tamper ")); printedMessage = true; } if ((moduleData[10] & 0xF0) == 0xC0) { if (printedMessage) stream->print("| "); stream->print(F("PC5204: Tamper restored ")); printedMessage = true; } } /* * Module data during panel command 0x57: Wireless key query * Structure decoding: *incomplete * Content decoding: *incomplete * * Byte 2 bit 0-1: Wireless key 1 battery * Byte 2 bit 2-3: Wireless key 2 battery * Byte 2 bit 4-5: Wireless key 3 battery * Byte 2 bit 6-7: Wireless key 4 battery * Byte 3: Wireless keys 5-8 battery * Byte 4: Wireless keys 9-12 battery * Byte 5: Wireless keys 13-16 battery * Byte 6: Unknown * Byte 7: Unknown * Byte 8: Unknown * Byte 9: Unknown * Byte 10: Unknown * * 11111111 1 11111111 11111111 11111111 10111111 [Module/0x05] Wireless key notification * 01010111 0 11111111 11111111 11111111 11111111 11111111 11111111 11111111 11111111 11111111 [0x57] Wireless key query * * Module Keys1+ Keys5+ Keys9+ Keys13+ * 11111111 1 11111101 11111111 11111111 11111111 11111111 11111111 11111111 11111111 11110110 [Module/0x57] Wireless key low battery: 1 * 11111111 1 11111110 11111111 11111111 11111111 11111111 11111111 11111111 11111111 11110111 [Module/0x57] Wireless key battery restored: 1 * 11111111 1 11111111 11111111 01111111 11111111 11111111 11111111 11111111 11111111 01111000 [Module/0x57] Wireless key low battery: 12 * 11111111 1 11111111 11111111 11111111 10111111 11111111 11111111 11111111 11111111 10111000 [Module/0x57] Wireless key battery restored: 16 * 11111111 1 11111011 11111111 01111111 11111111 11111111 11111111 11111111 11111111 01111000 [Module/0x57] Wireless key low battery: 12 | Wireless key battery restored: 2 * Byte 0 1 2 3 4 5 6 7 8 9 10 */ void dscKeybusInterface::printModule_0x57() { bool printedMessage = false; if (printModuleSlots(255, 2, 5, 0xC0, 0, 2, 0x02, true)) { stream->print(F("Wireless key low battery: ")); printModuleSlots(1, 2, 5, 0xC0, 0, 2, 0x02, true); printedMessage = true; } if (printModuleSlots(255, 2, 5, 0xC0, 0, 2, 0x01, true)) { if (printedMessage) stream->print(F("| ")); stream->print(F("Wireless key battery restored: ")); printModuleSlots(1, 2, 5, 0xC0, 0, 2, 0x01, true); } } /* * Module data during panel command 0x58: Module status query * Structure decoding: *incomplete * Content decoding: *incomplete * * Byte 2 bit 0-1: PC5204 battery restored * Byte 2 bit 2-3: PC5204 battery trouble * Byte 2 bit 4-5: PC5204 AC power restored * Byte 2 bit 6-7: PC5204 AC power trouble * Byte 3 bit 0-1: PC5204 output 1 restored * Byte 3 bit 2-3: PC5204 output 1 trouble * Byte 3 bit 4-7: Unknown * Byte 4: Unknown * Byte 5: Unknown * * Later generation panels: * Byte 6: Unknown * Byte 7: Unknown * Byte 8: Unknown * Byte 9: Unknown * Byte 10: Unknown * Byte 11: Unknown * Byte 12: Unknown * Byte 13: Unknown * * 11111111 1 11111111 11111111 11111111 11011111 [Module/0x05] Module status notification * 01011000 0 10101010 10101010 10101010 10101010 [0x58] Module status query * * Module PC5204 * 11111111 1 11111100 11111111 11111111 11111111 [Module/0x58] PC5204: Battery restored * Byte 0 1 2 3 4 5 * * Later generation panels: * 11111111 1 11111111 11111111 11111111 11011111 11111111 11111111 11111111 11111111 [Module/0x05] Module status notification * 01011000 0 10101010 10101010 10101010 10101010 10101010 10101010 10101010 10101010 10101010 10101010 10101010 10101010 [0x58] Module status query * * Module PC5204 * 11111111 1 00111111 11111111 11111111 11111111 11111111 11111111 11111111 11111111 11111111 11111111 11111111 11111111 [Module/0x58] PC5204: AC power trouble * Byte 0 1 2 3 4 5 6 7 8 9 10 11 12 13 */ void dscKeybusInterface::printModule_0x58() { bool printedMessage = false; if ((moduleData[2] & 0x03) == 0) { stream->print(F("PC5204: Battery restored ")); printedMessage = true; } if ((moduleData[2] & 0x0C) == 0) { if (printedMessage) stream->print("| "); stream->print(F("PC5204: Battery trouble ")); printedMessage = true; } if ((moduleData[2] & 0x30) == 0) { if (printedMessage) stream->print("| "); stream->print(F("PC5204: AC power restored ")); printedMessage = true; } if ((moduleData[2] & 0xC0) == 0) { if (printedMessage) stream->print("| "); stream->print(F("PC5204: AC power trouble ")); printedMessage = true; } if ((moduleData[3] & 0x03) == 0) { if (printedMessage) stream->print("| "); stream->print(F("PC5204: Output 1 restored ")); printedMessage = true; } if ((moduleData[3] & 0x0C) == 0) { if (printedMessage) stream->print("| "); stream->print(F("PC5204: Output 1 trouble ")); printedMessage = true; } if (!printedMessage) printUnknownData(); } /* * Module data during panel command 0x70: LCD keypad data query * Structure decoding: complete * Content decoding: complete * * Byte 2 bits 0-3: Digit 1 * Byte 2 bits 4-7: Digit 2 * Byte 3 bits 0-3: Digit 3 * Byte 3 bits 4-7: Digit 4 * Byte 4 bits 0-3: Digit 5 * Byte 4 bits 4-7: Digit 6 * Byte 5 bits 0-3: Digit 7 * Byte 5 bits 4-7: Digit 8 * Byte 6: Unknown * * 11111111 1 11111111 10101010 11111111 11111111 11111111 11111111 11111111 11111111 [Module/0x05] Partition 2 Key: Submit data * 01110000 0 11111111 11111111 11111111 11111111 11111111 [0x70] LCD keypad data query * * Module Digit Digit Digit Digit * 11111111 1 00010101 00010101 00000000 00000000 00101010 [Module/0x70] * Byte 0 1 2 3 4 5 6 */ void dscKeybusInterface::printModule_0x70() { stream->print(F("LCD keypad data entry: ")); if (decimalInput) { if (moduleData[2] print("0"); if (moduleData[2] print("0"); stream->print(moduleData[2], DEC); } else { for (byte moduleByte = 2; moduleByte print(moduleData[moduleByte] >> 4, HEX); stream->print(moduleData[moduleByte] & 0x0F, HEX); } } } /* * Module data during panel command 0x94: Requesting module programming data * Structure decoding: *incomplete * Content decoding: *incomplete */ void dscKeybusInterface::printModule_0x94() { stream->print(F("Module programming response")); } /* * Module data during panel command: 0xD5 Keypad zone query * Structure decoding: *incomplete * Content decoding: *incomplete * * Bytes 2-9: Keypad slots 1-8 * Bit 0-1: Keypad zone closed * Bit 2-3: Unknown * Bit 4-5: Keypad zone open * Bit 6-7: Unknown * * 11111111 1 11111111 11111111 11111111 11111011 [Module/0x05] Keypad zone status notification * 11010101 0 10101010 10101010 10101010 10101010 10101010 10101010 10101010 10101010 [0xD5] Keypad zone query * * Module Slot 1 Slot 2 Slot 3 Slot 4 Slot 5 Slot 6 Slot 7 Slot 8 * 11111111 1 00000011 11111111 11111111 11111111 11111111 11111111 11111111 11111111 [Module/0xD5] Keypad slot 1: Zone open * 11111111 1 00001111 11111111 11111111 11111111 11111111 11111111 11111111 11111111 [Module/0xD5] Keypad slot 1: Zone open // Exit *8 programming * 11111111 1 11111111 11111111 11111111 11111111 11111111 11111111 11111111 00001111 [Module/0xD5] Keypad slot 8: Zone open // Exit *8 programming * 11111111 1 11110000 11111111 11111111 11111111 11111111 11111111 11111111 11111111 [Module/0xD5] Keypad slot 1: Zone closed // Zone closed while unconfigured * 11111111 1 11110011 11111111 11111111 11111111 11111111 11111111 11111111 11111111 [Module/0xD5] Keypad slot 1 // Zone closed while unconfigured after opened once * 11111111 1 00110000 11111111 11111111 11111111 11111111 11111111 11111111 11111111 [Module/0xD5] Keypad slot 1: Zone closed // NC * 11111111 1 00111100 11111111 11111111 11111111 11111111 11111111 11111111 11111111 [Module/0xD5] Keypad slot 1: Zone closed // After exiting *8 programming after NC * Byte 0 1 2 3 4 5 6 7 8 9 */ void dscKeybusInterface::printModule_0xD5() { stream->print(F("Keypad ")); bool firstData = true; for (byte moduleByte = 2; moduleByte print(F("Slot ")); firstData = false; } else stream->print(F(" | Slot ")); stream->print(moduleByte - 1); if ((slotData & 0x03) == 0x03 && (slotData & 0x30) == 0) stream->print(F(": Zone open")); if ((slotData & 0x03) == 0 && (slotData & 0x30) == 0x30) stream->print(F(": Zone closed")); } } } /* * Keypad keys * * All panels, command 0x05: * Byte 2: Partition 1 keys * Byte 3: Partition 2 keys * * Later generation panels, command 0x05: * Byte 2: Partition 1 keys * Byte 3: Partition 2 keys * Byte 8: Partition 3 keys * Byte 9: Partition 4 keys * * Later generation panels, command 0x1B: * Byte 2: Partition 5 keys * Byte 3: Partition 6 keys * Byte 8: Partition 7 keys * Byte 9: Partition 8 keys * * Early generation panels: * * Module 1:Keys 2:Keys * 11111111 1 00000101 11111111 11111111 11111111 [Module/0x05] Partition 1 Key: 1 * 11111111 1 00101101 11111111 11111111 11111111 [Module/0x05] Partition 1 Key: # * 11111111 1 11111111 00010001 11111111 11111111 [Module/0x05] Partition 2 Key: 4 * Byte 0 1 2 3 4 5 * * Later generation panels: * * Module 1:Keys 2:Keys 3:Keys 4:Keys * 11111111 1 00101000 11111111 11111111 11111111 11111111 11111111 11111111 11111111 [Module/0x05] Partition 1 Key: * * 11111111 1 11111111 00010001 11111111 11111111 11111111 11111111 11111111 11111111 [Module/0x05] Partition 2 Key: 4 * Byte 0 1 2 3 4 5 6 7 8 9 * * Module 5:Keys 6:Keys 7:Keys 8:Keys * 11111111 1 00000101 11111111 11111111 11111111 11111111 11111111 11111111 11111111 [Module/0x1B] Partition 5 Key: 1 * Byte 0 1 2 3 4 5 6 7 8 9 * * Module 1:Keys 2:Keys 3:Keys 4:Keys * 11111111 1 11111111 11110111 11111111 11111111 11111111 11111111 11111111 11111111 11111111 [Module/0xE6.20] Partition 1 Key: Menu navigation * Byte 0 1 2 3 4 5 6 7 8 9 10 * */ bool dscKeybusInterface::printModule_Keys() { bool printedMessage = false; byte partitionNumber = 1; byte startByte = 2; byte endByte = 9; switch (moduleCmd) { case 0x1B: partitionNumber = 5; break; case 0x27: case 0x2D: case 0x3E: endByte = 3; break; case 0xE6: { startByte = 3; endByte = 3; switch (moduleSubCmd) { case 0x01: partitionNumber = 3; break; case 0x02: partitionNumber = 4; break; case 0x03: partitionNumber = 5; break; case 0x04: partitionNumber = 6; break; case 0x05: partitionNumber = 7; break; case 0x06: partitionNumber = 8; break; case 0x20: partitionNumber = 1; break; case 0x21: partitionNumber = 2; break; } break; } } for (byte testByte = startByte; testByte print(F("Key: ")); printModule_KeyCodes(testByte); } printedMessage = true; } partitionNumber++; } return printedMessage; } // Keypad key values void dscKeybusInterface::printModule_KeyCodes(byte keyByte) { switch (moduleData[keyByte]) { case 0x00: printNumberSpace(0); break; case 0x05: printNumberSpace(1); break; case 0x0A: printNumberSpace(2); break; case 0x0F: printNumberSpace(3); break; case 0x11: printNumberSpace(4); break; case 0x16: printNumberSpace(5); break; case 0x1B: printNumberSpace(6); break; case 0x1C: printNumberSpace(7); break; case 0x22: printNumberSpace(8); break; case 0x27: printNumberSpace(9); break; case 0x28: stream->print(F("* ")); break; case 0x2D: stream->print(F("# ")); break; case 0x46: stream->print(F("Wireless key disarm ")); break; //isn't send if wls keys uses access codes 17-32 is enabled case 0x52: stream->print(F("Identified voice prompt help ")); break; case 0x6E: stream->print(F("Global away arm ")); break; case 0x70: stream->print(F("Command output 3 ")); break; case 0x7A: stream->print(F("Time and date programming ")); break; case 0x75: stream->print(F("Entered *1/*2/*3 ? ")); break; case 0x82: stream->print(F("Enter ")); break; case 0x87: stream->print(F("Right arrow ")); break; case 0x88: stream->print(F("Left arrow ")); break; case 0x8D: stream->print(F("Bypass recall ")); break; case 0x93: stream->print(F("Recall bypass group ")); break; case 0x94: stream->print(F("Global label broadcast ")); break; case 0x99: stream->print(F("Function key [25] Future Use ")); break; case 0xA5: stream->print(F("Receive data ")); break; case 0xAA: stream->print(F("Submit data ")); break; case 0xAF: stream->print(F("Arm: Stay ")); break; case 0xB1: stream->print(F("Arm: Away ")); break; case 0xB6: stream->print(F("Arm: No entry delay ")); break; case 0xBB: stream->print(F("Door chime configuration ")); break; case 0xBC: stream->print(F("*6 System test ")); break; case 0xC3: stream->print(F("*1 Zone bypass programming ")); break; case 0xC4: stream->print(F("*2 Trouble menu ")); break; case 0xC9: stream->print(F("*3 Alarm memory display ")); break; case 0xCE: stream->print(F("*5 Programming ")); break; case 0xD0: stream->print(F("*6 Programming ")); break; case 0xD5: stream->print(F("Command output 1 ")); break; case 0xDA: stream->print(F("Reset / Command output 2 ")); break; case 0xDF: stream->print(F("Global stay arm ")); break; case 0xE1: stream->print(F("Quick exit ")); break; case 0xE6: stream->print(F("Activate stay/away zones ")); break; case 0xEB: stream->print(F("LCD pixel test ")); break; case 0xEC: stream->print(F("Command output 4 ")); break; case 0xF2: stream->print(F("Global disarm ")); break; // Possible overlap with "General voice prompt help" case 0xF7: stream->print(F("Menu navigation ")); break; } } /* * Zone expander zone status module response for panel commands: 0x22, 0x28, 0x33, 0x39, 0xE6.8, 0xE6.A, 0xE6.C, 0xE6.E */ void dscKeybusInterface::printModule_Expander() { byte startByte = 2; byte startZone = 1; stream->print(F("Zone expander: ")); switch (moduleCmd) { case 0x22: printNumberSpace(0); startZone = 1; break; case 0x28: printNumberSpace(1); startZone = 9; break; case 0x33: printNumberSpace(2); startZone = 17; break; case 0x39: printNumberSpace(3); startZone = 25; break; case 0xE6: { startByte = 3; switch (moduleSubCmd) { case 0x08: printNumberSpace(4); startZone = 33; break; case 0x0A: printNumberSpace(5); startZone = 41; break; case 0x0C: printNumberSpace(6); startZone = 49; break; case 0x0E: printNumberSpace(7); startZone = 57; break; } break; } } if (moduleData[startByte] != moduleData[startByte + 1] || moduleData[startByte + 2] != moduleData[startByte + 3]) { stream->print(F("| Zones changed: ")); byte zoneNumber = startZone; for (byte zoneByte = startByte; zoneByte print(F("open ")); break; case 1: stream->print(F("closed ")); break; case 2: stream->print(F("tamper ")); break; case 3: stream->print(F("open (D/EOL) ")); break; } } zoneNumber++; zoneMaskShift += 2; } } } } /* * Prints slots and zones for module responses to panel commands: 0x11, 0x41, 0x4C, 0x57 * * If outputNumber is set to 0, printModuleSlots() will return 'true' if any of the specified * bytes contains data - this is used to selectively print a label only if data is present. */ bool dscKeybusInterface::printModuleSlots(byte outputNumber, byte startByte, byte endByte, byte startMask, byte endMask, byte bitShift, byte matchValue, bool reverse) { for (byte testByte = startByte; testByte >= bitShift) { if (testByte == endByte && testMask < endMask) return false; byte testData = moduleData[testByte]; // Reverses the bit order if (reverse) { testData = 0; for (byte i = 0; i < 8; i++) testData |= ((moduleData[testByte] >> i) & 1) > matchShift == matchValue) { if (outputNumber == 255) return true; else printNumberSpace(outputNumber); } if (outputNumber != 255) outputNumber++; matchShift -= bitShift; } } return false; } // Print 0x8D and 0x94 section and command subsection data used for programming modules void dscKeybusInterface::printModuleProgramming(byte panelByte2, byte panelByte3) { switch (panelByte2) { case 0x11: stream->print(F("RF5132")); break; //section 804 verified on pc1832 and pc5020 case 0x14: stream->print(F("RF5400")); break; //section 801 not verified case 0x15: stream->print(F("RF5936")); break; //section 802 not verified case 0x16: stream->print(F("LINKS2X50")); break; //section 803 not verified case 0x17: stream->print(F("PC5108L")); break; //section 806 not verified case 0x19: stream->print(F("RF5100")); break; //section 805 not verified case 0x31: stream->print(F("*5 user")); break; //*5 access codes verified on pc1832 and pc5020 default: stream->print("Unknown data"); } stream->print(" | "); if (panelByte3 < 16) stream->print("0"); stream->print(panelByte3, HEX); } /* * Panel lights and status message for commands: 0x05, 0x1B, 0x27, 0x2D, 0x34, 0x3E */ void dscKeybusInterface::printPanelPartitionStatus(byte startPartition, byte startByte, byte endByte) { byte partitionCount = startPartition; for (byte statusByte = startByte; statusByte startPartition) stream->print(" | "); printPartition(); stream->print(partitionCount); stream->print(": "); if (panelData[statusByte] == 0 || panelData[statusByte] == 0xC7 || panelData[statusByte] == 0xFF) stream->print(F("disabled")); else printPanelLights(statusByte - 1); partitionCount++; } } /* * Date and time for panel commands: 0xA5, 0xAA, 0xEB, 0xEC * Structure decoding: complete * Content decoding: complete */ void dscKeybusInterface::printPanelTime(byte panelByte) { byte dscYear3 = panelData[panelByte] >> 4; byte dscYear4 = panelData[panelByte] & 0x0F; byte dscMonth = panelData[panelByte + 1] >= 4; byte dscDay1 = panelData[panelByte + 1] >= 3; byte dscDay2 = panelData[panelByte + 2] >> 5; byte dscDay = dscDay1 | dscDay2; byte dscHour = panelData[panelByte + 2] & 0x1F; byte dscMinute = panelData[panelByte + 3] >> 2; if (dscYear3 >= 7) stream->print(F("19")); else stream->print(F("20")); stream->print(dscYear3); stream->print(dscYear4, HEX); stream->print("."); if (dscMonth < 10) stream->print("0"); stream->print(dscMonth); stream->print("."); if (dscDay < 10) stream->print("0"); stream->print(dscDay); stream->print(" "); if (dscHour < 10) stream->print("0"); stream->print(dscHour); stream->print(F(":")); if (dscMinute < 10) stream->print("0"); stream->print(dscMinute); } /* * Prints access codes for printPanelStatus0()...printPanelStatus1B() status messages * Structure decoding: complete * Content decoding: complete */ void dscKeybusInterface::printPanelAccessCode(byte dscCode, bool accessCodeIncrease) { if (accessCodeIncrease) { if (dscCode >= 35) dscCode += 5; } else { if (dscCode >= 40) dscCode += 3; } switch (dscCode) { case 40: stream->print(F("Master ")); break; default: stream->print(F("Access ")); break; } stream->print(F("code ")); stream->print(dscCode); } /* * Beeps number for panel commands: 0x64, 0x69, 0xE6_0x19 * Structure decoding: complete * Content decoding: complete */ void dscKeybusInterface::printPanelBeeps(byte panelByte) { stream->print(F("| Beep: ")); stream->print(panelData[panelByte] / 2); stream->print(F(" beeps")); } /* * Tone pattern for panel commands: 0x75, 0x7A, 0xE6_0x20 * Structure decoding: complete * Content decoding: complete */ void dscKeybusInterface::printPanelTone(byte panelByte) { stream->print(F("| Tone: ")); bool printedMessage = false; if (panelData[panelByte] == 0) { stream->print(F("none")); return; } if ((panelData[panelByte] & 0x80) == 0x80) { stream->print(F("constant tone ")); printedMessage = true; } if ((panelData[panelByte] & 0x70) != 0) { if (printedMessage) stream->print("| "); stream->print((panelData[panelByte] & 0x70) >> 4); stream->print(F(" beep ")); } if ((panelData[panelByte] & 0x0F) != 0) { stream->print("| "); stream->print(panelData[panelByte] & 0x0F); stream->print(F("s interval")); } } /* * Buzzer pattern for panel commands: 0x7F, 0x82 * Structure decoding: complete * Content decoding: complete */ void dscKeybusInterface::printPanelBuzzer(byte panelByte) { stream->print(F("| Buzzer: ")); stream->print(panelData[panelByte]); stream->print("s"); } /* * Zones for panel commands: 0x0A, 0x5D, 0x63, 0xB1, 0xE6.17, 0xE6.18, 0xE6.20, 0xE6.2B, 0xE6.2C, 0xE6.41 * Structure decoding: complete * Content decoding: complete */ bool dscKeybusInterface::printPanelZones(byte inputByte, byte startZone) { bool zonesEnabled = false; for (byte panelByte = inputByte; panelByte print((zoneBit + startZone) + ((panelByte - inputByte) * 8)); stream->print(" "); } } } } if (!zonesEnabled && panelData[0] != 0x0A && panelData[0] != 0x0F) stream->print(F("none")); return zonesEnabled; } void dscKeybusInterface::printPartition() { stream->print(F("Partition ")); } void dscKeybusInterface::printUnknownData() { stream->print("Unknown data"); } void dscKeybusInterface::printStatusLights() { stream->print(F("Status lights: ")); } void dscKeybusInterface::printZoneLights(bool lowerRange) { if (lowerRange) stream->print(F(" | Zones 1-32 lights: ")); else stream->print(F(" | Zones 33-64 lights: ")); } void dscKeybusInterface::printStatusLightsFlashing() { stream->print(F("| Status lights flashing: ")); } void dscKeybusInterface::printNumberSpace(byte number) { stream->print(number); stream->print(" "); } void dscKeybusInterface::printNumberOffset(byte panelByte, int numberOffset) { stream->print(panelData[panelByte] + numberOffset); } // Prints individual bits as a number for partitions and zones void dscKeybusInterface::printPanelBitNumbers(byte panelByte, byte startNumber, byte startBit, byte stopBit, bool printNone) { if (printNone && panelData[panelByte] == 0) stream->print(F("none ")); else { byte bitCount = 0; for (byte bit = startBit; bit print(startNumber + bitCount); stream->print(" "); } bitCount++; } } } // Prints the panel message as binary with an optional parameter to print spaces between bytes void dscKeybusInterface::printPanelBinary(bool printSpaces) { for (byte panelByte = 0; panelByte < panelByteCount; panelByte++) { if (panelByte == 1) stream->print(panelData[panelByte]); // Prints the stop bit else { for (byte mask = 0x80; mask; mask >>= 1) { if (mask & panelData[panelByte]) stream->print("1"); else stream->print("0"); } } if (printSpaces && (panelByte != panelByteCount - 1 || displayTrailingBits)) stream->print(" "); } if (displayTrailingBits) { byte trailingBits = (panelBitCount - 1) % 8; if (trailingBits > 0) { for (int i = trailingBits - 1; i >= 0; i--) { stream->print(bitRead(panelData[panelByteCount], i)); } } } } // Prints the module message as binary with an optional parameter to print spaces between bytes void dscKeybusInterface::printModuleBinary(bool printSpaces) { for (byte moduleByte = 0; moduleByte < moduleByteCount; moduleByte++) { if (moduleByte == 1) stream->print(moduleData[moduleByte]); // Prints the stop bit else if (hideKeypadDigits && (moduleByte == 2 || moduleByte == 3 || moduleByte == 8 || moduleByte == 9) && (moduleData[2] print("1"); else stream->print("0"); } } if (printSpaces && (moduleByte != moduleByteCount - 1 || displayTrailingBits)) stream->print(" "); } if (displayTrailingBits) { byte trailingBits = (moduleBitCount - 1) % 8; if (trailingBits > 0) { for (int i = trailingBits - 1; i >= 0; i--) { stream->print(bitRead(moduleData[moduleByteCount], i)); } } } } // Prints the panel command as hex void dscKeybusInterface::printPanelCommand() { stream->print(F("0x")); if (panelData[0] < 16) stream->print("0"); stream->print(panelData[0], HEX); if (panelData[0] == 0xE6) { stream->print("."); if (panelData[2] < 16) stream->print("0"); stream->print(panelData[2], HEX); } }