The doc directory contains the source files of the documentation of plotly.py. It is composed of two parts:

• inside the python/ directory, tutorials corresponding to https://plotly.com/python/
• inside the apidoc/ directory, configuration files for generating the API reference documentation (hosted on https://plotly.com/python-api-reference/)

Python packages required to build the docs are listed in requirements.txt in the doc directory.

Before building the documentation locally, you need to set up a dedicated environment with the doc-specific dependencies.

You will need the gdal system library installed (it's a build dependency of geopandas, a required dependency). The uv pip install step below will fail without it.

cd doc
uv venv --python 3.9
source .venv/bin/activate
uv pip install -r requirements.txt

If you are documenting a feature that has not yet been released, you also need an editable install of plotly so your local changes are reflected:

uv pip uninstall plotly       # remove the PyPI version installed by requirements.txt
uv pip install -e ..          # install from your local checkout

Each tutorial is a markdown (.md) file, which can be opened in Jupyter Notebook or in JupyterLab by installing jupytext.

For small edits (e.g., correcting typos) to an existing tutorial, you can simply click on the "edit this page on GitHub" link at the top right of the page (e.g. clicking on this link on https://plotly.com/python/bar-charts/ will take you to https://github.com/plotly/plotly.py/edit/doc-prod/doc/python/bar-charts.md, where you can edit the page on GitHub).

For more important edits where you need to run the notebook to check the output, clone the repository and setup an environment as described in the main contributing notes. If you're writing documentation at the same time as you are developing a feature, make sure to install with editable install (pip install -e, as described in main contributing notes), so that you only need to restart the Jupyter kernel when you have changed the source code of the feature.

• The doc-prod branch contains the live docs which are available on the website. As soon as a change is merged into doc-prod, the updated docs are deployed and made publicly available.
• The main branch contains docs which have been written but are not ready to be released, such as for an upcoming feature in the next plotly.py release.

When updating the docs, two workflows are possible:

• In the case of updating the docs for an already-released feature: your changes can be deployed to the documentation website as soon as they have been merged, so you should branch off of the doc-prod branch and open your pull request into the doc-prod branch.
• In the case of writing docs for a new (not-yet-released) feature: you should branch off main and open your pull request into main, so that the documentation of the feature is only deployed when it is available in a released version of plotly.py. The main branch will be merged into doc-prod at release time, as described below.

Changes to doc-prod are not automatically merged back into main. To prevent the branches from diverging, doc-prod should be merged into main on a regular basis via a pull request (e.g., a branch named merge-doc-prod-to-main-branch merged into main).

At release time the synchronization is bidirectional (see also RELEASE.md):

1. doc-prod → main — merge any outstanding doc-only fixes into main (if not already done recently).
2. main → doc-prod — merge main into doc-prod so that documentation for newly released features is deployed to the live site.
3. Publish the site — update the graphing-library-docs repo to bump the plotly.py and plotly.js versions and rebuild the Algolia search indexes. See the Update documentation site section of RELEASE.md for the full procedure.

Release prep: When synchronizing main into doc-prod for a new release, update the plotly== version pin in doc/requirements.txt to match the newly released version. The doc-prod build uses this pinned version (not an editable install), so examples that rely on new features will fail if the pin is stale.

Tutorial files are Markdown files with a YAML frontmatter block that contains Jupyter notebook metadata (used by jupytext) and plotly-specific metadata (used by the documentation site for navigation, SEO, and categorization).

Here is an annotated example of the frontmatter:

---
jupyter:
  jupytext:
    notebook_metadata_filter: all
    text_representation:
      extension: .md
      format_name: markdown
      format_version: '1.3'
      jupytext_version: 1.17.3
  kernelspec:
    display_name: Python 3 (ipykernel)
    language: python
    name: python3
  language_info:
    codemirror_mode:
      name: ipython
      version: 3
    file_extension: .py
    mimetype: text/x-python
    name: python
    nbconvert_exporter: python
    pygments_lexer: ipython3
    version: 3.9.0
  plotly:
    description: Short description for SEO and page previews.
    display_as: basic          # Category: basic, statistical, scientific, maps, 3d, etc.
    language: python
    layout: base
    name: Page Title           # Displayed in the navigation sidebar
    order: 3                   # Position within the display_as category
    page_type: example_index
    permalink: python/my-page/ # URL path on the documentation site
    thumbnail: thumbnail/my-page.jpg
---

The plotly metadata fields are the most important to enter correctly when creating/updating a tutorial:

Code cells are written as fenced code blocks with the python language tag. Each code cell is separated by a blank line and starts with ```python. Markdown cells are written as regular Markdown text between code blocks.

1. Copy an existing tutorial from doc/python/ as a starting point to get the frontmatter structure right.
2. Update the frontmatter — at minimum, change name, permalink, description, display_as, and order. Make sure permalink matches the filename (e.g., my-feature.md → python/my-feature/).
3. Write examples using fenced python code blocks. Each block becomes a separate Jupyter cell when the file is converted.
4. Test in Jupyter — open the file directly in JupyterLab (with jupytext installed) and run all cells to verify the examples work:

   jupyter lab doc/python/my-feature.md

5. Build the single page (optional) — you can build just your page instead of the entire doc set:

   cd doc
   make build/html/2019-07-03-my-feature.html

6. Check that CI passes — push your branch and open a pull request. The CI will build all pages and run validation on frontmatter and page ordering.

We try to write short, standalone and (almost) self-explaining examples. Most examples should focus on a single feature.

Checklist

• Each example should have a clear title (titles are used for the navigation bar and indexed by search engines)
• Package imports should be called in the same cell as the example, so that it is possible to copy-paste a single cell to reproduce the example.
• Variable names should be consistent with other examples, for example use fig for a Figure object, df for a pandas dataframe, etc.
• Examples should not be too long to execute (typically < 10s), since the doc is built as part of the continuous integration (CI) process. Examples taking longer to execute should be discussed in a new issue to decide whether they can be accepted.

From the doc directory, with the virtual environment activated:

cd doc
source .venv/bin/activate
make

This runs through every .md file in python/ and:

1. Appends the "What About Dash?" footer from what_about_dash.md
2. Converts each Markdown file to a Jupyter notebook using jupytext
3. Executes the notebook and converts it to HTML using nbconvert (with a 10-minute timeout per notebook)
4. Outputs HTML files to build/html/ with a 2019-07-03- date prefix
5. Generates redirect pages for v3 backward compatibility and "next version" previews

To build in parallel (as CI does):

make -kj8

The -k flag continues past failures and -j8 runs 8 jobs in parallel.

To build only one page (useful during development):

make build/html/2019-07-03-bar-charts.html

The filename follows the pattern 2019-07-03-<markdown-filename-without-extension>.html.

Why the 2019-07-03- prefix? The downstream graphing-library-docs site uses Jekyll, whose _posts/ collection only processes files matching the pattern YYYY-MM-DD-title.ext and silently ignores anything else. The specific date is an arbitrary placeholder — its value is never displayed; it just satisfies Jekyll's filename parser.

If a build fails, check build/failures/<page-name> for the error output.

We use sphinx and its autodoc extension in order to generate the documentation of the API. Sphinx uses the reST markup language.

The API docs require an editable install of plotly because the build process temporarily modifies source files (renaming graph_objects references to the internal graph_objs name for Sphinx, then reverting afterward).

cd doc
source .venv/bin/activate
uv pip uninstall plotly
uv pip install -e ..
cd apidoc
make html

The output is written to apidoc/_build/html/.

The apidoc/Makefile performs several steps:

1. Temporarily rewrites :class: cross-references in plotly/graph_objs/ to use the internal graph_objs name so Sphinx can resolve them.
2. Copies color module files into plotly/colors/ and plotly/express/colors/ so their docstrings are picked up.
3. Runs sphinx-apidoc to auto-generate .rst stubs from the Python source, excluding validators/, tests/, matplotlylib/, offline/, and api/.
4. Runs sphinx-build to produce HTML from the .rst files.
5. Reverts the graph_objs source changes with git checkout.
6. Cleans up the temporarily copied color files.
7. Renames all graph_objs references back to graph_objects in the generated HTML and related files.

Lists of objects to be documented are found in .rst files corresponding to submodules:

When a new object is added to the exposed API, it needs to be added to the corresponding .rst file to appear in the API doc.

• css files are found in _static
• Template files are found in _templates. .rst templates describe how the autodoc of the different objects should look like.
• conf.py contains the Sphinx configuration (theme, extensions, etc.)

Documentation is built and deployed automatically by the GitHub Actions workflow defined in .github/workflows/build-doc.yml.

1. Environment setup — Python 3.9, uv, and system dependencies (rename utility) are installed.
2. Install doc dependencies — uv pip install -r requirements.txt inside doc/.
3. Install editable plotly (non-doc-prod branches only) — Replaces the PyPI plotly with the local checkout so that in-development features are available.
4. Build HTML tutorials — Runs make -kj8 (twice, to retry transient failures). Then downloads and runs validation scripts from plotly/graphing-library-docs:
   • front-matter-ci.py validates the YAML frontmatter of all built pages.
   • check-or-enforce-order.py verifies page ordering within categories.
5. Upload build artifact — The built HTML is uploaded as a GitHub Actions artifact named doc-html for inspection.

When changes are pushed to doc-prod, the workflow deploys to three branches of the plotly/plotly.py-docs repository:

After deploying, the workflow triggers a downstream build in plotly/graphing-library-docs by pushing an empty commit. That repository generates the final https://plotly.com/python site.

doc/python/*.md  (source)
    ↓  make (jupytext + nbconvert)
doc/build/html/*.html  (built tutorials)
    ↓  CI deploys to plotly/plotly.py-docs@built
plotly/graphing-library-docs  (triggered rebuild)
    ↓  Jekyll site generation
https://plotly.com/python/  (live site)

Check build/failures/<page-name> for the full error output. Common causes:

• Missing import or dataset — make sure all imports and remote data URLs are correct.
• Timeout — the default is 600 seconds (10 minutes). If your example legitimately needs more time, discuss in an issue before increasing the timeout.

• Confirm you are running from the doc/ directory with the virtual environment activated.
• Check that jupytext and nbconvert are installed: jupytext --version and jupyter nbconvert --version.

The API doc build temporarily modifies files under plotly/graph_objs/. If a previous build was interrupted, those files may be in a dirty state. Reset them with:

git checkout -- plotly/graph_objs

The CI runs front-matter-ci.py and check-or-enforce-order.py against the built HTML. Ensure your tutorial's YAML frontmatter includes all required fields (name, permalink, description, display_as, order, layout, language) and that the order value does not conflict with existing pages in the same display_as category.