Raspberry PI Paycoin Web Wallet

To install Node.JS on the Raspberry Pi run the following commands.

Download a prebuilt ARM version of node.js by running this command:

wget http://nodejs.org/dist/v0.10.28/node-v0.10.28-linux-arm-pi.tar.gz

then run:

cd /usr/local && sudo tar --strip-components 1 -xzf ~/node-v0.10.28-linux-arm-pi.tar.gz

You will likely be prompted for a password because of sudo.

Note: 15.04 seems to be pretty new and nodejs is not built for it yet. If you get node installed it'll work otherwise stick to 14.04.

• Add the PPA sudo add-apt-repository ppa:chris-lea/node.js

• Update download servers sudo apt-get update

• Install Node.js sudo apt-get install nodejs

• Install Python Software Properties (a pre-requisite) sudo apt-get install python-software-properties

• Install SQLite sudo apt-get install sqlite3 libsqlite3-dev

• Install Git sudo apt-get install git

• Install Nodemon (if you are making changes, it'll make it easier with nodemon) sudo npm install nodemon -g

• Install Mocha (for running the tests) sudo npm install mocha -g

• Install Git sudo apt-get install git

Clone this repository git clone https://github.com/tvl83/RaspPaycoin <directory>. The <directory> is optional if you do not want the default folder name of RaspPaycoin.

In the root directory of the project run npm install and sudo npm install bower -g. Let everything install, then cd public and run bower install.

Rename the /config/config.changeme.json to config.json with mv config.changeme.json config.json

Within the config.json change the rpcuser, rpcpassword, and rpcport to what ever is set in your paycoin.conf.

The paycoin.conf that is on the raspberryPi is configured with the default settings so you wont have to do anything. On any other system you need to set it to the correct parameters.

There are a couple ways to figure this out. The most straight forward way is to use your router and look at connected devices and get the IP from that. The device name is paycoind.

If you have an iPhone or Android phone you can download a free program called FING which detects all the detected devices on your wifi connection.

Using FING it'll be paycoind device.

From the root directory run npm start

When started, you may point your browser to localhost:3000

If you are using nodemon run nodemon --ignore public/

Nodemon will detect changes and automatically restart node when changes are detected.

On the rPi and Ubuntu you can figure out your local IP address by running ifconfig. It will look like this

I highlighted the part that is your local IP.

Please feel free to submit pull requests. This is a work in progress at the moment and we welcome any input. The views are just a free bootstrap admin panel (SB Bootstrap 2). If you want to skin the UI, please fork and skin it and submit a pull request.

This project is supported by the community.

BTC: 1Q2ZEQcMftL6tGKVXWNobwTZDFVDQx2aGM

XPY: PURNbr88icJ7YX47o6jrdWSh7PQzfrKWrk

Any donations are greatly appreciated. This is a project created 100% for free on a volunteer basis.

Thank you!