gyroflow/flowshutter: Firmware for FC based gyro logger device · GitHub

Homepage • Documentation • Discord • Report bug • Request feature

Flowshutter is a custom camera remote. When used in conjunction with readily available hardware, this results in a flexible and reliable external camera motion logger for Gyroflow. It can provide precise synchronization of camera video recording and motion logger (betaflight/emuflight FC) recording.

Flowshutter aims to make all cameras ready for stabilization with Gyroflow software to provide you with one of the best open-source video stabilization experiences.

Flowshutter has the following features:

• '1-click' - (1) start/stop camera recording and (2) arm/disarm FC, via one click
• Camera recording start/stop control
• FC arm/disarm control
• FC blackbox flash chip erasion
• OLED display

with many more features on the way!

Currently we are wroking with NeutronRC for a small range of sales in China. Subsequent versions are in production, please stay tuned.

At the same time you can try to DIY your own flowshutter hardware. We have two open sourced designs:

• Credit card sized design:

• FC sized design:

• Sony MULTI Terminal protocol
• Momentary Ground
• 3.3V Schmitt trigger
• ZCAM UART protocol
• Sony LANC protocol *
• 5V Schmitt trigger (WIP)
• HDMI CEC protocol (WIP)

For more information about support camera list, please check the list on the documentation website.

*Note: We need an extra Arduino board to send the Sony LANC protocol, triggering mechnism is based on momentary ground, but needs to add opto-coupling module between arduino and flowshutter to prevent overvoltage.

FC is short for flight controller, more specifically with betaflight/emuflight running on.

• flowbox (highly recommended)
• modern FC with BMI270 gyroscope (recommended)
• any other FC that support CRSF protocol

The micropython firmware we used is v1.19.1, You can find a copy in the /tools directory. Also, a uPyCraft windows version is also provided in the /tools directory. You can try to use that to flash your ESP32 without the help of ESP-idf.

Pre-requisite:

• Python3

1. Install node
2. Install Visual Studio Code
3. Install Pymakr extension in Visual Studio Code
4. Edit address in pymakr.conf to your flowshutter's COM port
5. Pull flowshutter code from https://github.com/gyroflow/flowshutter
6. Then you can connect and upload the flowshutter code

TBD

1. Modify the pymakr.conf to match up with your flowshutter's COM port
2. python build.py debug to prepare the debug environment (move modules to /obj directory)
3. Upload all modules to the hardware and reboot it.

Note:

• python build.py debug: copy modules to /obj directory
• python build.py debug clean: clean the /obj directory. Useful when you are suffering from memory leak.

There's a CI that can help us to this. For compiling it locally, please check build.py for more information.

This project is licensed under:

• CC-BY-NC-ND 4.0
• AGPL 3.0

Note: AGPL 3.0 is only avaliable after you signed our CLA.

This software is provided as is, and please feel free to use this on your own camera which will be used for shooting/recording comercial images/videos. Please contact DusKing1 if you intend to use it for other commercial purposes.

Due to egregious abuse of open source in Wuxi, China, this project refuses to provide any support to any user in Wuxi, or to cooperate in any form with any company or individual in Wuxi. Please do something worthy of your conscience.