• Introduction
  
• Getting Started
  
• Boards available
  
• Troubleshooting
  
• Wiki

This repo adds the support of STM32 MCU in Arduino IDE.

This porting is based on:

• STM32Cube MCU Packages including:
  • The HAL hardware abstraction layer, enabling portability between different STM32 devices via standardized API calls
  • The Low-Layer (LL) APIs, a light-weight, optimized, expert oriented set of APIs designed for both performance and runtime efficiency
  • CMSIS device defintion for STM32
• CMSIS: Cortex Microcontroller Software Interface Standard (CMSIS) is a vendor-independent hardware abstraction layer for the Cortex®-M processor series and defines generic tool interfaces. It has been packaged as a module for Arduino IDE: https://github.com/stm32duino/ArduinoModule-CMSIS
• GNU Arm Embedded Toolchain: Arm Embedded GCC compiler, libraries and other GNU tools necessary for bare-metal software development on devices based on the Arm Cortex-M. Packages are provided thanks The xPack GNU Arm Embedded GCC: https://github.com/xpack-dev-tools/arm-none-eabi-gcc-xpack

This repo is available as a package usable with Arduino Boards Manager.

Use this link in the "Additional Boards Managers URLs" field:

https://github.com/stm32duino/BoardManagerFiles/raw/master/STM32/package_stm_index.json

For full instructions on using the "Boards Manager", see the Getting Started page.

Advanced user can use the repository to benefit from the latest development. See the Using git repository page.

User can add a STM32 based board following this wiki.

See milestones to have an overview of the next release content.

For question, support, ..., you could submit a topic on the stm32duino forum.

If you have any issue, you could file an issue on Github.

In any case, it always fine to search if your issue was not already existing before submit a new one.