FazBrowse GitHub Viewer | Trending |
URL:
| Home
Tools: [Download Repo ZIP]   [Original HTTPS Page]

Prepare 0.10.0 by sdb9696 · Pull Request #1473 · python-kasa/python-kasa · GitHub

  1. python-kasa
  2. python-kasa

Repository navigation

Prepare 0.10.0 - #1473

Merged
sdb9696 merged 9 commits into
masterfrom
release/0.10.0
Jan 26, 2025
ConversationCommits (9)ChecksFiles changed
Merged

Prepare 0.10.0#1473
sdb9696 merged 9 commits into
masterfrom
release/0.10.0

Conversation

sdb9696 commented Jan 22, 2025 •
edited
Loading

Copy link
Copy Markdown
Contributor

0.10.0 (2025-01-26)

Full Changelog

Release summary:

This release brings support for many new devices, including completely new device types:

  • Support for Tapo robot vacuums. Special thanks to @steveredden, @MAXIGAMESSUPPER, and veep60 for helping to get this implemented!
  • Support for hub attached cameras and doorbells (H200)
  • Improved support for hubs (including pairing & better chime controls)
  • Support for many new camera and doorbell device models, including C220, C720, D100C, D130, and D230

Many thanks to testers and new contributors - @steveredden, @DawidPietrykowski, @Obbay2, @andrewome, @ryenitcher and @etmmvdp!

Breaking changes:

  • uses_http is now a readonly property of device config. Consumers that relied on uses_http to be persisted with DeviceConfig.to_dict() will need to store the value separately.
  • is_color, is_dimmable, is_variable_color_temp, valid_temperate_range, and has_effects attributes from the Light module are deprecated, consumers should use has_feature("hsv"), has_feature("brightness"), has_feature("color_temp"), get_feature("color_temp").range, and Module.LightEffect in dev.modules respectively. Calling the deprecated attributes will emit a DeprecationWarning and type checkers will fail them.
  • alarm_volume on the smart.Alarm module is changed from str to int

Breaking changes:

Implemented enhancements:

Fixed bugs:

  • TP-Link HS300 Wi-Fi Power-Strip - "Parent On/Off" not functioning. #637
  • Convert carpet_clean_mode to carpet_boost switch #1486 (@rytilahti)
  • Change category for empty dustbin feature from Primary to Config #1485 (@rytilahti)
  • Report 0 for instead of None for zero current and voltage #1483 (@ryenitcher)
  • Disable iot camera creation until more complete #1480 (@sdb9696)
  • ssltransport: use debug logger for sending requests #1443 (@rytilahti)
  • Fix discover cli command with host #1437 (@sdb9696)
  • Fallback to is_low for batterysensor's battery_low #1420 (@rytilahti)
  • Fix iot strip turn on and off from parent #639 (@Obbay2)

Added support for devices:

Project maintenance:

sdb9696 added the release-prep Label for PR bumping release and updating changelog. label Jan 22, 2025

codecov Bot commented Jan 22, 2025 •
edited
Loading

Copy link
Copy Markdown

Codecov Report

All modified and coverable lines are covered by tests ✅

Project coverage is 92.64%. Comparing base (781d07f) to head (50084b7).
Report is 16 commits behind head on master.

Additional details and impacted files 
@@           Coverage Diff           @@
##           master    #1473   +/-   ##
=======================================
  Coverage   92.64%   92.64%           
=======================================
  Files         149      149           
  Lines        9428     9428           
  Branches      957      957           
=======================================
  Hits         8735     8735           
  Misses        497      497           
  Partials      196      196

☔ View full report in Codecov by Sentry.
📢 Have feedback on the report? Share it here.

🚀 New features to boost your workflow:
  • ❄️ Test Analytics: Detect flaky tests, report on failures, and find test suite problems.

sdb9696 mentioned this pull request Jan 24, 2025
Merged
sdb9696 marked this pull request as ready for review January 26, 2025 13:38
rytilahti approved these changes Jan 26, 2025
View reviewed changes

rytilahti left a comment

Copy link
Copy Markdown
Member

Choose a reason for hiding this comment

The reason will be displayed to describe this comment to others. Learn more.

Choose a reason Spam Abuse Off Topic Outdated Duplicate Resolved Low Quality

🎉

sdb9696 merged commit 09e73fa into master Jan 26, 2025
sdb9696 deleted the release/0.10.0 branch January 26, 2025 17:15
rytilahti pushed a commit to rytilahti/python-kasa that referenced this pull request Aug 31, 2025
Prepare 0.10.0 (python-kasa#1473)
a11b953 
## [0.10.0](https://github.com/python-kasa/python-kasa/tree/0.10.0) (2025-01-26)

[Full Changelog](python-kasa/python-kasa@0.9.1...0.10.0)

**Release summary:**

This release brings support for many new devices, including completely new device types:

- Support for Tapo robot vacuums. Special thanks to @steveredden, @MAXIGAMESSUPPER, and veep60 for helping to get this implemented!
- Support for hub attached cameras and doorbells (H200)
- Improved support for hubs (including pairing & better chime controls)
- Support for many new camera and doorbell device models, including C220, C720, D100C, D130, and D230

Many thanks to testers and new contributors - @steveredden, @DawidPietrykowski, @Obbay2, @andrewome, @ryenitcher and @etmmvdp!

**Breaking changes:**

- `uses_http` is now a readonly property of device config. Consumers that relied on `uses_http` to be persisted with `DeviceConfig.to_dict()` will need to store the value separately.
- `is_color`, `is_dimmable`, `is_variable_color_temp`, `valid_temperate_range`, and `has_effects` attributes from the `Light` module are deprecated, consumers should use `has_feature("hsv")`, `has_feature("brightness")`, `has_feature("color_temp")`, `get_feature("color_temp").range`, and `Module.LightEffect in dev.modules` respectively. Calling the deprecated attributes will emit a `DeprecationWarning` and type checkers will fail them.
-  `alarm_volume` on the `smart.Alarm` module is changed from `str` to `int`

**Breaking changes:**

- Make uses\_http a readonly property of device config [\python-kasa#1449](python-kasa#1449) (@sdb9696)
- Allow passing alarm parameter overrides [\python-kasa#1340](python-kasa#1340) (@rytilahti)
- Deprecate legacy light module is\_capability checks [\python-kasa#1297](python-kasa#1297) (@sdb9696)

**Implemented enhancements:**

- Expose more battery sensors for D230 [\python-kasa#1451](python-kasa#1451)
- dumping HTTP POST Body for Tapo Vacuum \(RV30 Plus\) [\python-kasa#937](python-kasa#937)
- Add common alarm interface [\python-kasa#1479](python-kasa#1479) (@sdb9696)
- Add common childsetup interface [\python-kasa#1470](python-kasa#1470) (@sdb9696)
- Add childsetup module to smartcam hubs [\python-kasa#1469](python-kasa#1469) (@sdb9696)
- Add smartcam pet detection toggle module [\python-kasa#1465](python-kasa#1465) (@DawidPietrykowski)
- Only log one warning per unknown clean error code and status [\python-kasa#1462](python-kasa#1462) (@rytilahti)
- Add childlock module for vacuums [\python-kasa#1461](python-kasa#1461) (@rytilahti)
- Add ultra mode \(fanspeed = 5\) for vacuums [\python-kasa#1459](python-kasa#1459) (@rytilahti)
- Add setting to change carpet clean mode [\python-kasa#1458](python-kasa#1458) (@rytilahti)
- Add setting to change clean count [\python-kasa#1457](python-kasa#1457) (@rytilahti)
- Add mop module [\python-kasa#1456](python-kasa#1456) (@rytilahti)
- Enable dynamic hub child creation and deletion on update [\python-kasa#1454](python-kasa#1454) (@sdb9696)
- Expose current cleaning information [\python-kasa#1453](python-kasa#1453) (@rytilahti)
- Add battery module to smartcam devices [\python-kasa#1452](python-kasa#1452) (@sdb9696)
- Allow update of camera modules after setting values [\python-kasa#1450](python-kasa#1450) (@sdb9696)
- Update hub children on first update and delay subsequent updates [\python-kasa#1438](python-kasa#1438) (@sdb9696)
- Add support for doorbells and chimes [\python-kasa#1435](python-kasa#1435) (@steveredden)
- Implement vacuum dustbin module \(dust\_bucket\) [\python-kasa#1423](python-kasa#1423) (@rytilahti)
- Allow https for klaptransport [\python-kasa#1415](python-kasa#1415) (@rytilahti)
- Add smartcam child device support for smartcam hubs [\python-kasa#1413](python-kasa#1413) (@sdb9696)
- Add powerprotection module [\python-kasa#1337](python-kasa#1337) (@rytilahti)
- Add vacuum speaker controls [\python-kasa#1332](python-kasa#1332) (@rytilahti)
- Add consumables module for vacuums [\python-kasa#1327](python-kasa#1327) (@rytilahti)
- Add ADC Value to PIR Enabled Switches [\python-kasa#1263](python-kasa#1263) (@ryenitcher)
- Add support for cleaning records [\python-kasa#945](python-kasa#945) (@rytilahti)
- Initial support for vacuums \(clean module\) [\python-kasa#944](python-kasa#944) (@rytilahti)
- Add support for pairing devices with hubs [\python-kasa#859](python-kasa#859) (@rytilahti)

**Fixed bugs:**

- TP-Link HS300 Wi-Fi Power-Strip - "Parent On/Off" not functioning. [\python-kasa#637](python-kasa#637)
- Convert carpet\_clean\_mode to carpet\_boost switch [\python-kasa#1486](python-kasa#1486) (@rytilahti)
- Change category for empty dustbin feature from Primary to Config [\python-kasa#1485](python-kasa#1485) (@rytilahti)
- Report 0 for instead of None for zero current and voltage [\python-kasa#1483](python-kasa#1483) (@ryenitcher)
- Disable iot camera creation until more complete [\python-kasa#1480](python-kasa#1480) (@sdb9696)
- ssltransport: use debug logger for sending requests [\python-kasa#1443](python-kasa#1443) (@rytilahti)
- Fix discover cli command with host [\python-kasa#1437](python-kasa#1437) (@sdb9696)
- Fallback to is\_low for batterysensor's battery\_low [\python-kasa#1420](python-kasa#1420) (@rytilahti)
- Fix iot strip turn on and off from parent [\python-kasa#639](python-kasa#639) (@Obbay2)

**Added support for devices:**

- Add D130\(US\) 1.0 1.1.9 fixture [\python-kasa#1476](python-kasa#1476) (@sdb9696)
- Add D100C\(US\) 1.0 1.1.3 fixture [\python-kasa#1475](python-kasa#1475) (@sdb9696)
- Add C220\(EU\) 1.0 1.2.2 camera fixture [\python-kasa#1466](python-kasa#1466) (@DawidPietrykowski)
- Add D230\(EU\) 1.20 1.1.19 fixture [\python-kasa#1448](python-kasa#1448) (@sdb9696)
- Add fixture for C720 camera [\python-kasa#1433](python-kasa#1433) (@steveredden)

**Project maintenance:**

- Update ruff to 0.9 [\python-kasa#1482](python-kasa#1482) (@sdb9696)
- Cancel in progress CI workflows after new pushes [\python-kasa#1481](python-kasa#1481) (@sdb9696)
- Update test framework to support smartcam device discovery. [\python-kasa#1477](python-kasa#1477) (@sdb9696)
- Add error code 7 for clean module [\python-kasa#1474](python-kasa#1474) (@rytilahti)
- Enable CI workflow on PRs to feat/ fix/ and janitor/ [\python-kasa#1471](python-kasa#1471) (@sdb9696)
- Add commit-hook to prettify JSON files [\python-kasa#1455](python-kasa#1455) (@rytilahti)
- Add required sphinx.configuration [\python-kasa#1446](python-kasa#1446) (@rytilahti)
- Add more redactors for smartcams [\python-kasa#1439](python-kasa#1439) (@sdb9696)
- Add KS230\(US\) 2.0 1.0.11 IOT Fixture [\python-kasa#1430](python-kasa#1430) (@ZeliardM)
- Add tests for dump\_devinfo parent/child smartcam fixture generation [\python-kasa#1428](python-kasa#1428) (@sdb9696)
- Raise errors on single smartcam child requests [\python-kasa#1427](python-kasa#1427) (@sdb9696)
rytilahti pushed a commit to rytilahti/python-kasa that referenced this pull request Oct 26, 2025
Prepare 0.10.0 (python-kasa#1473)
4577b2c 
## [0.10.0](https://github.com/python-kasa/python-kasa/tree/0.10.0) (2025-01-26)

[Full Changelog](python-kasa/python-kasa@0.9.1...0.10.0)

**Release summary:**

This release brings support for many new devices, including completely new device types:

- Support for Tapo robot vacuums. Special thanks to @steveredden, @MAXIGAMESSUPPER, and veep60 for helping to get this implemented!
- Support for hub attached cameras and doorbells (H200)
- Improved support for hubs (including pairing & better chime controls)
- Support for many new camera and doorbell device models, including C220, C720, D100C, D130, and D230

Many thanks to testers and new contributors - @steveredden, @DawidPietrykowski, @Obbay2, @andrewome, @ryenitcher and @etmmvdp!

**Breaking changes:**

- `uses_http` is now a readonly property of device config. Consumers that relied on `uses_http` to be persisted with `DeviceConfig.to_dict()` will need to store the value separately.
- `is_color`, `is_dimmable`, `is_variable_color_temp`, `valid_temperate_range`, and `has_effects` attributes from the `Light` module are deprecated, consumers should use `has_feature("hsv")`, `has_feature("brightness")`, `has_feature("color_temp")`, `get_feature("color_temp").range`, and `Module.LightEffect in dev.modules` respectively. Calling the deprecated attributes will emit a `DeprecationWarning` and type checkers will fail them.
-  `alarm_volume` on the `smart.Alarm` module is changed from `str` to `int`

**Breaking changes:**

- Make uses\_http a readonly property of device config [\python-kasa#1449](python-kasa#1449) (@sdb9696)
- Allow passing alarm parameter overrides [\python-kasa#1340](python-kasa#1340) (@rytilahti)
- Deprecate legacy light module is\_capability checks [\python-kasa#1297](python-kasa#1297) (@sdb9696)

**Implemented enhancements:**

- Expose more battery sensors for D230 [\python-kasa#1451](python-kasa#1451)
- dumping HTTP POST Body for Tapo Vacuum \(RV30 Plus\) [\python-kasa#937](python-kasa#937)
- Add common alarm interface [\python-kasa#1479](python-kasa#1479) (@sdb9696)
- Add common childsetup interface [\python-kasa#1470](python-kasa#1470) (@sdb9696)
- Add childsetup module to smartcam hubs [\python-kasa#1469](python-kasa#1469) (@sdb9696)
- Add smartcam pet detection toggle module [\python-kasa#1465](python-kasa#1465) (@DawidPietrykowski)
- Only log one warning per unknown clean error code and status [\python-kasa#1462](python-kasa#1462) (@rytilahti)
- Add childlock module for vacuums [\python-kasa#1461](python-kasa#1461) (@rytilahti)
- Add ultra mode \(fanspeed = 5\) for vacuums [\python-kasa#1459](python-kasa#1459) (@rytilahti)
- Add setting to change carpet clean mode [\python-kasa#1458](python-kasa#1458) (@rytilahti)
- Add setting to change clean count [\python-kasa#1457](python-kasa#1457) (@rytilahti)
- Add mop module [\python-kasa#1456](python-kasa#1456) (@rytilahti)
- Enable dynamic hub child creation and deletion on update [\python-kasa#1454](python-kasa#1454) (@sdb9696)
- Expose current cleaning information [\python-kasa#1453](python-kasa#1453) (@rytilahti)
- Add battery module to smartcam devices [\python-kasa#1452](python-kasa#1452) (@sdb9696)
- Allow update of camera modules after setting values [\python-kasa#1450](python-kasa#1450) (@sdb9696)
- Update hub children on first update and delay subsequent updates [\python-kasa#1438](python-kasa#1438) (@sdb9696)
- Add support for doorbells and chimes [\python-kasa#1435](python-kasa#1435) (@steveredden)
- Implement vacuum dustbin module \(dust\_bucket\) [\python-kasa#1423](python-kasa#1423) (@rytilahti)
- Allow https for klaptransport [\python-kasa#1415](python-kasa#1415) (@rytilahti)
- Add smartcam child device support for smartcam hubs [\python-kasa#1413](python-kasa#1413) (@sdb9696)
- Add powerprotection module [\python-kasa#1337](python-kasa#1337) (@rytilahti)
- Add vacuum speaker controls [\python-kasa#1332](python-kasa#1332) (@rytilahti)
- Add consumables module for vacuums [\python-kasa#1327](python-kasa#1327) (@rytilahti)
- Add ADC Value to PIR Enabled Switches [\python-kasa#1263](python-kasa#1263) (@ryenitcher)
- Add support for cleaning records [\python-kasa#945](python-kasa#945) (@rytilahti)
- Initial support for vacuums \(clean module\) [\python-kasa#944](python-kasa#944) (@rytilahti)
- Add support for pairing devices with hubs [\python-kasa#859](python-kasa#859) (@rytilahti)

**Fixed bugs:**

- TP-Link HS300 Wi-Fi Power-Strip - "Parent On/Off" not functioning. [\python-kasa#637](python-kasa#637)
- Convert carpet\_clean\_mode to carpet\_boost switch [\python-kasa#1486](python-kasa#1486) (@rytilahti)
- Change category for empty dustbin feature from Primary to Config [\python-kasa#1485](python-kasa#1485) (@rytilahti)
- Report 0 for instead of None for zero current and voltage [\python-kasa#1483](python-kasa#1483) (@ryenitcher)
- Disable iot camera creation until more complete [\python-kasa#1480](python-kasa#1480) (@sdb9696)
- ssltransport: use debug logger for sending requests [\python-kasa#1443](python-kasa#1443) (@rytilahti)
- Fix discover cli command with host [\python-kasa#1437](python-kasa#1437) (@sdb9696)
- Fallback to is\_low for batterysensor's battery\_low [\python-kasa#1420](python-kasa#1420) (@rytilahti)
- Fix iot strip turn on and off from parent [\python-kasa#639](python-kasa#639) (@Obbay2)

**Added support for devices:**

- Add D130\(US\) 1.0 1.1.9 fixture [\python-kasa#1476](python-kasa#1476) (@sdb9696)
- Add D100C\(US\) 1.0 1.1.3 fixture [\python-kasa#1475](python-kasa#1475) (@sdb9696)
- Add C220\(EU\) 1.0 1.2.2 camera fixture [\python-kasa#1466](python-kasa#1466) (@DawidPietrykowski)
- Add D230\(EU\) 1.20 1.1.19 fixture [\python-kasa#1448](python-kasa#1448) (@sdb9696)
- Add fixture for C720 camera [\python-kasa#1433](python-kasa#1433) (@steveredden)

**Project maintenance:**

- Update ruff to 0.9 [\python-kasa#1482](python-kasa#1482) (@sdb9696)
- Cancel in progress CI workflows after new pushes [\python-kasa#1481](python-kasa#1481) (@sdb9696)
- Update test framework to support smartcam device discovery. [\python-kasa#1477](python-kasa#1477) (@sdb9696)
- Add error code 7 for clean module [\python-kasa#1474](python-kasa#1474) (@rytilahti)
- Enable CI workflow on PRs to feat/ fix/ and janitor/ [\python-kasa#1471](python-kasa#1471) (@sdb9696)
- Add commit-hook to prettify JSON files [\python-kasa#1455](python-kasa#1455) (@rytilahti)
- Add required sphinx.configuration [\python-kasa#1446](python-kasa#1446) (@rytilahti)
- Add more redactors for smartcams [\python-kasa#1439](python-kasa#1439) (@sdb9696)
- Add KS230\(US\) 2.0 1.0.11 IOT Fixture [\python-kasa#1430](python-kasa#1430) (@ZeliardM)
- Add tests for dump\_devinfo parent/child smartcam fixture generation [\python-kasa#1428](python-kasa#1428) (@sdb9696)
- Raise errors on single smartcam child requests [\python-kasa#1427](python-kasa#1427) (@sdb9696)
rytilahti pushed a commit to rytilahti/python-kasa that referenced this pull request Nov 10, 2025
Prepare 0.10.0 (python-kasa#1473)
2382821 
## [0.10.0](https://github.com/python-kasa/python-kasa/tree/0.10.0) (2025-01-26)

[Full Changelog](python-kasa/python-kasa@0.9.1...0.10.0)

**Release summary:**

This release brings support for many new devices, including completely new device types:

- Support for Tapo robot vacuums. Special thanks to @steveredden, @MAXIGAMESSUPPER, and veep60 for helping to get this implemented!
- Support for hub attached cameras and doorbells (H200)
- Improved support for hubs (including pairing & better chime controls)
- Support for many new camera and doorbell device models, including C220, C720, D100C, D130, and D230

Many thanks to testers and new contributors - @steveredden, @DawidPietrykowski, @Obbay2, @andrewome, @ryenitcher and @etmmvdp!

**Breaking changes:**

- `uses_http` is now a readonly property of device config. Consumers that relied on `uses_http` to be persisted with `DeviceConfig.to_dict()` will need to store the value separately.
- `is_color`, `is_dimmable`, `is_variable_color_temp`, `valid_temperate_range`, and `has_effects` attributes from the `Light` module are deprecated, consumers should use `has_feature("hsv")`, `has_feature("brightness")`, `has_feature("color_temp")`, `get_feature("color_temp").range`, and `Module.LightEffect in dev.modules` respectively. Calling the deprecated attributes will emit a `DeprecationWarning` and type checkers will fail them.
-  `alarm_volume` on the `smart.Alarm` module is changed from `str` to `int`

**Breaking changes:**

- Make uses\_http a readonly property of device config [\python-kasa#1449](python-kasa#1449) (@sdb9696)
- Allow passing alarm parameter overrides [\python-kasa#1340](python-kasa#1340) (@rytilahti)
- Deprecate legacy light module is\_capability checks [\python-kasa#1297](python-kasa#1297) (@sdb9696)

**Implemented enhancements:**

- Expose more battery sensors for D230 [\python-kasa#1451](python-kasa#1451)
- dumping HTTP POST Body for Tapo Vacuum \(RV30 Plus\) [\python-kasa#937](python-kasa#937)
- Add common alarm interface [\python-kasa#1479](python-kasa#1479) (@sdb9696)
- Add common childsetup interface [\python-kasa#1470](python-kasa#1470) (@sdb9696)
- Add childsetup module to smartcam hubs [\python-kasa#1469](python-kasa#1469) (@sdb9696)
- Add smartcam pet detection toggle module [\python-kasa#1465](python-kasa#1465) (@DawidPietrykowski)
- Only log one warning per unknown clean error code and status [\python-kasa#1462](python-kasa#1462) (@rytilahti)
- Add childlock module for vacuums [\python-kasa#1461](python-kasa#1461) (@rytilahti)
- Add ultra mode \(fanspeed = 5\) for vacuums [\python-kasa#1459](python-kasa#1459) (@rytilahti)
- Add setting to change carpet clean mode [\python-kasa#1458](python-kasa#1458) (@rytilahti)
- Add setting to change clean count [\python-kasa#1457](python-kasa#1457) (@rytilahti)
- Add mop module [\python-kasa#1456](python-kasa#1456) (@rytilahti)
- Enable dynamic hub child creation and deletion on update [\python-kasa#1454](python-kasa#1454) (@sdb9696)
- Expose current cleaning information [\python-kasa#1453](python-kasa#1453) (@rytilahti)
- Add battery module to smartcam devices [\python-kasa#1452](python-kasa#1452) (@sdb9696)
- Allow update of camera modules after setting values [\python-kasa#1450](python-kasa#1450) (@sdb9696)
- Update hub children on first update and delay subsequent updates [\python-kasa#1438](python-kasa#1438) (@sdb9696)
- Add support for doorbells and chimes [\python-kasa#1435](python-kasa#1435) (@steveredden)
- Implement vacuum dustbin module \(dust\_bucket\) [\python-kasa#1423](python-kasa#1423) (@rytilahti)
- Allow https for klaptransport [\python-kasa#1415](python-kasa#1415) (@rytilahti)
- Add smartcam child device support for smartcam hubs [\python-kasa#1413](python-kasa#1413) (@sdb9696)
- Add powerprotection module [\python-kasa#1337](python-kasa#1337) (@rytilahti)
- Add vacuum speaker controls [\python-kasa#1332](python-kasa#1332) (@rytilahti)
- Add consumables module for vacuums [\python-kasa#1327](python-kasa#1327) (@rytilahti)
- Add ADC Value to PIR Enabled Switches [\python-kasa#1263](python-kasa#1263) (@ryenitcher)
- Add support for cleaning records [\python-kasa#945](python-kasa#945) (@rytilahti)
- Initial support for vacuums \(clean module\) [\python-kasa#944](python-kasa#944) (@rytilahti)
- Add support for pairing devices with hubs [\python-kasa#859](python-kasa#859) (@rytilahti)

**Fixed bugs:**

- TP-Link HS300 Wi-Fi Power-Strip - "Parent On/Off" not functioning. [\python-kasa#637](python-kasa#637)
- Convert carpet\_clean\_mode to carpet\_boost switch [\python-kasa#1486](python-kasa#1486) (@rytilahti)
- Change category for empty dustbin feature from Primary to Config [\python-kasa#1485](python-kasa#1485) (@rytilahti)
- Report 0 for instead of None for zero current and voltage [\python-kasa#1483](python-kasa#1483) (@ryenitcher)
- Disable iot camera creation until more complete [\python-kasa#1480](python-kasa#1480) (@sdb9696)
- ssltransport: use debug logger for sending requests [\python-kasa#1443](python-kasa#1443) (@rytilahti)
- Fix discover cli command with host [\python-kasa#1437](python-kasa#1437) (@sdb9696)
- Fallback to is\_low for batterysensor's battery\_low [\python-kasa#1420](python-kasa#1420) (@rytilahti)
- Fix iot strip turn on and off from parent [\python-kasa#639](python-kasa#639) (@Obbay2)

**Added support for devices:**

- Add D130\(US\) 1.0 1.1.9 fixture [\python-kasa#1476](python-kasa#1476) (@sdb9696)
- Add D100C\(US\) 1.0 1.1.3 fixture [\python-kasa#1475](python-kasa#1475) (@sdb9696)
- Add C220\(EU\) 1.0 1.2.2 camera fixture [\python-kasa#1466](python-kasa#1466) (@DawidPietrykowski)
- Add D230\(EU\) 1.20 1.1.19 fixture [\python-kasa#1448](python-kasa#1448) (@sdb9696)
- Add fixture for C720 camera [\python-kasa#1433](python-kasa#1433) (@steveredden)

**Project maintenance:**

- Update ruff to 0.9 [\python-kasa#1482](python-kasa#1482) (@sdb9696)
- Cancel in progress CI workflows after new pushes [\python-kasa#1481](python-kasa#1481) (@sdb9696)
- Update test framework to support smartcam device discovery. [\python-kasa#1477](python-kasa#1477) (@sdb9696)
- Add error code 7 for clean module [\python-kasa#1474](python-kasa#1474) (@rytilahti)
- Enable CI workflow on PRs to feat/ fix/ and janitor/ [\python-kasa#1471](python-kasa#1471) (@sdb9696)
- Add commit-hook to prettify JSON files [\python-kasa#1455](python-kasa#1455) (@rytilahti)
- Add required sphinx.configuration [\python-kasa#1446](python-kasa#1446) (@rytilahti)
- Add more redactors for smartcams [\python-kasa#1439](python-kasa#1439) (@sdb9696)
- Add KS230\(US\) 2.0 1.0.11 IOT Fixture [\python-kasa#1430](python-kasa#1430) (@ZeliardM)
- Add tests for dump\_devinfo parent/child smartcam fixture generation [\python-kasa#1428](python-kasa#1428) (@sdb9696)
- Raise errors on single smartcam child requests [\python-kasa#1427](python-kasa#1427) (@sdb9696)
rytilahti pushed a commit to rytilahti/python-kasa that referenced this pull request Jul 5, 2026
Prepare 0.10.0 (python-kasa#1473)
309dc46 
## [0.10.0](https://github.com/python-kasa/python-kasa/tree/0.10.0) (2025-01-26)

[Full Changelog](python-kasa/python-kasa@0.9.1...0.10.0)

**Release summary:**

This release brings support for many new devices, including completely new device types:

- Support for Tapo robot vacuums. Special thanks to @steveredden, @MAXIGAMESSUPPER, and veep60 for helping to get this implemented!
- Support for hub attached cameras and doorbells (H200)
- Improved support for hubs (including pairing & better chime controls)
- Support for many new camera and doorbell device models, including C220, C720, D100C, D130, and D230

Many thanks to testers and new contributors - @steveredden, @DawidPietrykowski, @Obbay2, @andrewome, @ryenitcher and @etmmvdp!

**Breaking changes:**

- `uses_http` is now a readonly property of device config. Consumers that relied on `uses_http` to be persisted with `DeviceConfig.to_dict()` will need to store the value separately.
- `is_color`, `is_dimmable`, `is_variable_color_temp`, `valid_temperate_range`, and `has_effects` attributes from the `Light` module are deprecated, consumers should use `has_feature("hsv")`, `has_feature("brightness")`, `has_feature("color_temp")`, `get_feature("color_temp").range`, and `Module.LightEffect in dev.modules` respectively. Calling the deprecated attributes will emit a `DeprecationWarning` and type checkers will fail them.
-  `alarm_volume` on the `smart.Alarm` module is changed from `str` to `int`

**Breaking changes:**

- Make uses\_http a readonly property of device config [\python-kasa#1449](python-kasa#1449) (@sdb9696)
- Allow passing alarm parameter overrides [\python-kasa#1340](python-kasa#1340) (@rytilahti)
- Deprecate legacy light module is\_capability checks [\python-kasa#1297](python-kasa#1297) (@sdb9696)

**Implemented enhancements:**

- Expose more battery sensors for D230 [\python-kasa#1451](python-kasa#1451)
- dumping HTTP POST Body for Tapo Vacuum \(RV30 Plus\) [\python-kasa#937](python-kasa#937)
- Add common alarm interface [\python-kasa#1479](python-kasa#1479) (@sdb9696)
- Add common childsetup interface [\python-kasa#1470](python-kasa#1470) (@sdb9696)
- Add childsetup module to smartcam hubs [\python-kasa#1469](python-kasa#1469) (@sdb9696)
- Add smartcam pet detection toggle module [\python-kasa#1465](python-kasa#1465) (@DawidPietrykowski)
- Only log one warning per unknown clean error code and status [\python-kasa#1462](python-kasa#1462) (@rytilahti)
- Add childlock module for vacuums [\python-kasa#1461](python-kasa#1461) (@rytilahti)
- Add ultra mode \(fanspeed = 5\) for vacuums [\python-kasa#1459](python-kasa#1459) (@rytilahti)
- Add setting to change carpet clean mode [\python-kasa#1458](python-kasa#1458) (@rytilahti)
- Add setting to change clean count [\python-kasa#1457](python-kasa#1457) (@rytilahti)
- Add mop module [\python-kasa#1456](python-kasa#1456) (@rytilahti)
- Enable dynamic hub child creation and deletion on update [\python-kasa#1454](python-kasa#1454) (@sdb9696)
- Expose current cleaning information [\python-kasa#1453](python-kasa#1453) (@rytilahti)
- Add battery module to smartcam devices [\python-kasa#1452](python-kasa#1452) (@sdb9696)
- Allow update of camera modules after setting values [\python-kasa#1450](python-kasa#1450) (@sdb9696)
- Update hub children on first update and delay subsequent updates [\python-kasa#1438](python-kasa#1438) (@sdb9696)
- Add support for doorbells and chimes [\python-kasa#1435](python-kasa#1435) (@steveredden)
- Implement vacuum dustbin module \(dust\_bucket\) [\python-kasa#1423](python-kasa#1423) (@rytilahti)
- Allow https for klaptransport [\python-kasa#1415](python-kasa#1415) (@rytilahti)
- Add smartcam child device support for smartcam hubs [\python-kasa#1413](python-kasa#1413) (@sdb9696)
- Add powerprotection module [\python-kasa#1337](python-kasa#1337) (@rytilahti)
- Add vacuum speaker controls [\python-kasa#1332](python-kasa#1332) (@rytilahti)
- Add consumables module for vacuums [\python-kasa#1327](python-kasa#1327) (@rytilahti)
- Add ADC Value to PIR Enabled Switches [\python-kasa#1263](python-kasa#1263) (@ryenitcher)
- Add support for cleaning records [\python-kasa#945](python-kasa#945) (@rytilahti)
- Initial support for vacuums \(clean module\) [\python-kasa#944](python-kasa#944) (@rytilahti)
- Add support for pairing devices with hubs [\python-kasa#859](python-kasa#859) (@rytilahti)

**Fixed bugs:**

- TP-Link HS300 Wi-Fi Power-Strip - "Parent On/Off" not functioning. [\python-kasa#637](python-kasa#637)
- Convert carpet\_clean\_mode to carpet\_boost switch [\python-kasa#1486](python-kasa#1486) (@rytilahti)
- Change category for empty dustbin feature from Primary to Config [\python-kasa#1485](python-kasa#1485) (@rytilahti)
- Report 0 for instead of None for zero current and voltage [\python-kasa#1483](python-kasa#1483) (@ryenitcher)
- Disable iot camera creation until more complete [\python-kasa#1480](python-kasa#1480) (@sdb9696)
- ssltransport: use debug logger for sending requests [\python-kasa#1443](python-kasa#1443) (@rytilahti)
- Fix discover cli command with host [\python-kasa#1437](python-kasa#1437) (@sdb9696)
- Fallback to is\_low for batterysensor's battery\_low [\python-kasa#1420](python-kasa#1420) (@rytilahti)
- Fix iot strip turn on and off from parent [\python-kasa#639](python-kasa#639) (@Obbay2)

**Added support for devices:**

- Add D130\(US\) 1.0 1.1.9 fixture [\python-kasa#1476](python-kasa#1476) (@sdb9696)
- Add D100C\(US\) 1.0 1.1.3 fixture [\python-kasa#1475](python-kasa#1475) (@sdb9696)
- Add C220\(EU\) 1.0 1.2.2 camera fixture [\python-kasa#1466](python-kasa#1466) (@DawidPietrykowski)
- Add D230\(EU\) 1.20 1.1.19 fixture [\python-kasa#1448](python-kasa#1448) (@sdb9696)
- Add fixture for C720 camera [\python-kasa#1433](python-kasa#1433) (@steveredden)

**Project maintenance:**

- Update ruff to 0.9 [\python-kasa#1482](python-kasa#1482) (@sdb9696)
- Cancel in progress CI workflows after new pushes [\python-kasa#1481](python-kasa#1481) (@sdb9696)
- Update test framework to support smartcam device discovery. [\python-kasa#1477](python-kasa#1477) (@sdb9696)
- Add error code 7 for clean module [\python-kasa#1474](python-kasa#1474) (@rytilahti)
- Enable CI workflow on PRs to feat/ fix/ and janitor/ [\python-kasa#1471](python-kasa#1471) (@sdb9696)
- Add commit-hook to prettify JSON files [\python-kasa#1455](python-kasa#1455) (@rytilahti)
- Add required sphinx.configuration [\python-kasa#1446](python-kasa#1446) (@rytilahti)
- Add more redactors for smartcams [\python-kasa#1439](python-kasa#1439) (@sdb9696)
- Add KS230\(US\) 2.0 1.0.11 IOT Fixture [\python-kasa#1430](python-kasa#1430) (@ZeliardM)
- Add tests for dump\_devinfo parent/child smartcam fixture generation [\python-kasa#1428](python-kasa#1428) (@sdb9696)
- Raise errors on single smartcam child requests [\python-kasa#1427](python-kasa#1427) (@sdb9696)
pillarsdotnet pushed a commit to pillarsdotnet/python-kasa that referenced this pull request Oct 22, 2026
Prepare 0.10.0 (python-kasa#1473)
e37cf64 
## [0.10.0](https://github.com/python-kasa/python-kasa/tree/0.10.0) (2025-01-26)

[Full Changelog](python-kasa/python-kasa@0.9.1...0.10.0)

**Release summary:**

This release brings support for many new devices, including completely new device types:

- Support for Tapo robot vacuums. Special thanks to @steveredden, @MAXIGAMESSUPPER, and veep60 for helping to get this implemented!
- Support for hub attached cameras and doorbells (H200)
- Improved support for hubs (including pairing & better chime controls)
- Support for many new camera and doorbell device models, including C220, C720, D100C, D130, and D230

Many thanks to testers and new contributors - @steveredden, @DawidPietrykowski, @Obbay2, @andrewome, @ryenitcher and @etmmvdp!

**Breaking changes:**

- `uses_http` is now a readonly property of device config. Consumers that relied on `uses_http` to be persisted with `DeviceConfig.to_dict()` will need to store the value separately.
- `is_color`, `is_dimmable`, `is_variable_color_temp`, `valid_temperate_range`, and `has_effects` attributes from the `Light` module are deprecated, consumers should use `has_feature("hsv")`, `has_feature("brightness")`, `has_feature("color_temp")`, `get_feature("color_temp").range`, and `Module.LightEffect in dev.modules` respectively. Calling the deprecated attributes will emit a `DeprecationWarning` and type checkers will fail them.
-  `alarm_volume` on the `smart.Alarm` module is changed from `str` to `int`

**Breaking changes:**

- Make uses\_http a readonly property of device config [\python-kasa#1449](python-kasa#1449) (@sdb9696)
- Allow passing alarm parameter overrides [\python-kasa#1340](python-kasa#1340) (@rytilahti)
- Deprecate legacy light module is\_capability checks [\python-kasa#1297](python-kasa#1297) (@sdb9696)

**Implemented enhancements:**

- Expose more battery sensors for D230 [\python-kasa#1451](python-kasa#1451)
- dumping HTTP POST Body for Tapo Vacuum \(RV30 Plus\) [\python-kasa#937](python-kasa#937)
- Add common alarm interface [\python-kasa#1479](python-kasa#1479) (@sdb9696)
- Add common childsetup interface [\python-kasa#1470](python-kasa#1470) (@sdb9696)
- Add childsetup module to smartcam hubs [\python-kasa#1469](python-kasa#1469) (@sdb9696)
- Add smartcam pet detection toggle module [\python-kasa#1465](python-kasa#1465) (@DawidPietrykowski)
- Only log one warning per unknown clean error code and status [\python-kasa#1462](python-kasa#1462) (@rytilahti)
- Add childlock module for vacuums [\python-kasa#1461](python-kasa#1461) (@rytilahti)
- Add ultra mode \(fanspeed = 5\) for vacuums [\python-kasa#1459](python-kasa#1459) (@rytilahti)
- Add setting to change carpet clean mode [\python-kasa#1458](python-kasa#1458) (@rytilahti)
- Add setting to change clean count [\python-kasa#1457](python-kasa#1457) (@rytilahti)
- Add mop module [\python-kasa#1456](python-kasa#1456) (@rytilahti)
- Enable dynamic hub child creation and deletion on update [\python-kasa#1454](python-kasa#1454) (@sdb9696)
- Expose current cleaning information [\python-kasa#1453](python-kasa#1453) (@rytilahti)
- Add battery module to smartcam devices [\python-kasa#1452](python-kasa#1452) (@sdb9696)
- Allow update of camera modules after setting values [\python-kasa#1450](python-kasa#1450) (@sdb9696)
- Update hub children on first update and delay subsequent updates [\python-kasa#1438](python-kasa#1438) (@sdb9696)
- Add support for doorbells and chimes [\python-kasa#1435](python-kasa#1435) (@steveredden)
- Implement vacuum dustbin module \(dust\_bucket\) [\python-kasa#1423](python-kasa#1423) (@rytilahti)
- Allow https for klaptransport [\python-kasa#1415](python-kasa#1415) (@rytilahti)
- Add smartcam child device support for smartcam hubs [\python-kasa#1413](python-kasa#1413) (@sdb9696)
- Add powerprotection module [\python-kasa#1337](python-kasa#1337) (@rytilahti)
- Add vacuum speaker controls [\python-kasa#1332](python-kasa#1332) (@rytilahti)
- Add consumables module for vacuums [\python-kasa#1327](python-kasa#1327) (@rytilahti)
- Add ADC Value to PIR Enabled Switches [\python-kasa#1263](python-kasa#1263) (@ryenitcher)
- Add support for cleaning records [\python-kasa#945](python-kasa#945) (@rytilahti)
- Initial support for vacuums \(clean module\) [\python-kasa#944](python-kasa#944) (@rytilahti)
- Add support for pairing devices with hubs [\python-kasa#859](python-kasa#859) (@rytilahti)

**Fixed bugs:**

- TP-Link HS300 Wi-Fi Power-Strip - "Parent On/Off" not functioning. [\python-kasa#637](python-kasa#637)
- Convert carpet\_clean\_mode to carpet\_boost switch [\python-kasa#1486](python-kasa#1486) (@rytilahti)
- Change category for empty dustbin feature from Primary to Config [\python-kasa#1485](python-kasa#1485) (@rytilahti)
- Report 0 for instead of None for zero current and voltage [\python-kasa#1483](python-kasa#1483) (@ryenitcher)
- Disable iot camera creation until more complete [\python-kasa#1480](python-kasa#1480) (@sdb9696)
- ssltransport: use debug logger for sending requests [\python-kasa#1443](python-kasa#1443) (@rytilahti)
- Fix discover cli command with host [\python-kasa#1437](python-kasa#1437) (@sdb9696)
- Fallback to is\_low for batterysensor's battery\_low [\python-kasa#1420](python-kasa#1420) (@rytilahti)
- Fix iot strip turn on and off from parent [\python-kasa#639](python-kasa#639) (@Obbay2)

**Added support for devices:**

- Add D130\(US\) 1.0 1.1.9 fixture [\python-kasa#1476](python-kasa#1476) (@sdb9696)
- Add D100C\(US\) 1.0 1.1.3 fixture [\python-kasa#1475](python-kasa#1475) (@sdb9696)
- Add C220\(EU\) 1.0 1.2.2 camera fixture [\python-kasa#1466](python-kasa#1466) (@DawidPietrykowski)
- Add D230\(EU\) 1.20 1.1.19 fixture [\python-kasa#1448](python-kasa#1448) (@sdb9696)
- Add fixture for C720 camera [\python-kasa#1433](python-kasa#1433) (@steveredden)

**Project maintenance:**

- Update ruff to 0.9 [\python-kasa#1482](python-kasa#1482) (@sdb9696)
- Cancel in progress CI workflows after new pushes [\python-kasa#1481](python-kasa#1481) (@sdb9696)
- Update test framework to support smartcam device discovery. [\python-kasa#1477](python-kasa#1477) (@sdb9696)
- Add error code 7 for clean module [\python-kasa#1474](python-kasa#1474) (@rytilahti)
- Enable CI workflow on PRs to feat/ fix/ and janitor/ [\python-kasa#1471](python-kasa#1471) (@sdb9696)
- Add commit-hook to prettify JSON files [\python-kasa#1455](python-kasa#1455) (@rytilahti)
- Add required sphinx.configuration [\python-kasa#1446](python-kasa#1446) (@rytilahti)
- Add more redactors for smartcams [\python-kasa#1439](python-kasa#1439) (@sdb9696)
- Add KS230\(US\) 2.0 1.0.11 IOT Fixture [\python-kasa#1430](python-kasa#1430) (@ZeliardM)
- Add tests for dump\_devinfo parent/child smartcam fixture generation [\python-kasa#1428](python-kasa#1428) (@sdb9696)
- Raise errors on single smartcam child requests [\python-kasa#1427](python-kasa#1427) (@sdb9696)
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters. Learn more about bidirectional Unicode characters
Show hidden characters
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment

Reviewers

rytilahti rytilahti approved these changes

Assignees

No one assigned

Labels

release-prep Label for PR bumping release and updating changelog.

Projects

None yet

Milestone

No milestone

Development

Successfully merging this pull request may close these issues.

2 participants

Back | FazBrowse Home | New Git URL