testcontainers
diff --git a/.gitignore b/.gitignore
@@ -72,3 +72,6 @@ venv
 .python-version
 .env
 .github-token
+
+# docs build
+site/
diff --git a/Dockerfile.docs b/Dockerfile.docs
@@ -0,0 +1,5 @@
+FROM python:3.11-slim
+
+RUN pip install poetry
+
+WORKDIR /docs
diff --git a/Makefile b/Makefile
@@ -68,3 +68,39 @@ clean-all: clean ## Remove all generated files and reset the local virtual envir
 .PHONY: help
 help:  ## Display command usage
 	@grep -E '^[0-9a-zA-Z_-]+:.*?## .*$$' $(MAKEFILE_LIST) | sort | awk 'BEGIN {FS = ":.*?## "}; {printf "\033[36m%-30s\033[0m %s\n", $$1, $$2}'
+
+## --------------------------------------
+
+DOCS_CONTAINER=mkdocs-container
+DOCS_IMAGE=mkdocs-poetry
+DOCS_DOCKERFILE := Dockerfile.docs
+
+.PHONY: clean-docs
+clean-docs:
+	@echo "Destroying docs"
+	@if docker ps -a --format '{{.Names}}' | grep -q '^$(DOCS_CONTAINER)$$'; then \
+		docker rm -f $(DOCS_CONTAINER); \
+	fi
+	@if docker images -q $(DOCS_IMAGE) | grep -q .; then \
+		docker rmi $(DOCS_IMAGE); \
+	fi
+
+.PHONY: docs-ensure-image
+docs-ensure-image:
+	@if [ -z "$$(docker images -q $(DOCS_IMAGE))" ]; then \
+		docker build -f $(DOCS_DOCKERFILE) -t $(DOCS_IMAGE) . ; \
+	fi
+
+.PHONY: serve-docs
+serve-docs: docs-ensure-image
+	docker run --rm --name $(DOCS_CONTAINER) -it -p 8000:8000 \
+		-v $(PWD):/testcontainers-go \
+		-w /testcontainers-go \
+		$(DOCS_IMAGE) bash -c "\
+			cd docs && poetry install --no-root && \
+			poetry run mkdocs serve -f ../mkdocs.yml -a 0.0.0.0:8000"
+
+# Needed if dependencies are added to the docs site
+.PHONY: export-docs-deps
+export-docs-deps:
+	cd docs && poetry export --without-hashes --output requirements.txt
diff --git a/docs/_headers b/docs/_headers
@@ -0,0 +1,2 @@
+/search/search_index.json
+  Access-Control-Allow-Origin: *
diff --git a/docs/_redirects b/docs/_redirects
diff --git a/docs/contributing.md b/docs/contributing.md
@@ -0,0 +1,126 @@
+# Contributing to `testcontainers-python`
+
+Welcome to the `testcontainers-python` community!
+This should give you an idea about how we build, test and release `testcontainers-python`!
+
+Highly recommended to read this document thoroughly to understand what we're working on right now
+and what our priorities are before you are trying to contribute something.
+
+This will greatly increase your chances of getting prompt replies as the maintainers are volunteers themselves.
+
+## Before you begin
+
+We recommend following these steps:
+
+1. Finish reading this document.
+2. Read the [recently updated issues](https://github.com/testcontainers/testcontainers-python/issues?q=is%3Aissue+is%3Aopen+sort%3Aupdated-desc){:target="\_blank"}
+3. Look for existing issues on the subject you are interested in - we do our best to label everything correctly
+
+## Local development
+
+### Pre-Requisites
+
+You need to have the following tools available to you:
+
+- `make` - You'll need a GNU Make for common developer activities
+- `poetry` - This is the primary package manager for the project
+- `pyenv` **Recommended**: For installing python versions for your system.
+  Poetry infers the current latest version from what it can find on the `PATH` so you are still fine if you don't use `pyenv`.
+
+### Build and test
+
+- Run `make install` to get `poetry` to install all dependencies and set up `pre-commit`
+  - **Recommended**: Run `make` or `make help` to see other commands available to you.
+- After this, you should have a working virtual environment and proceed with writing code with your favorite IDE
+- **TIP**: You can run `make core/tests` or `make modules/<my-module>/tests` to run the tests specifically for that to speed up feedback cycles
+- You can also run `make lint` to run the `pre-commit` for the entire codebase.
+
+## Adding new modules
+
+We have an [issue template](https://github.com/testcontainers/testcontainers-python/blob/main/.github/ISSUE_TEMPLATE/new-container.md){:target="\_blank"} for adding new module containers, please refer to that for more information.
+Once you've talked to the maintainers (we do our best to reply!) then you can proceed with contributing the new container.
+
+!!!WARNING
+
+    Please raise an issue before you try to contribute a new container! It helps maintainersunderstand your use-case and motivation.
+    This way we can keep pull requests forced on the "how", not the "why"! :pray:
+    It also gives maintainers a chance to give you last-minute guidance on caveats orexpectations, particularly with
+    new extra dependencies and how to manage them.
+
+### Module documentation
+
+Leave examples for others with your mew module such as `modules/<new_module>/basic_example.py`. You can create as many examples as you want.
+
+Create a new `docs/modules/<new_module>.md` describing the basic use of the new container. There is a [starter template provided here](https://raw.githubusercontent.com/testcontainers/testcontainers-python/blob/main/docs/modules/template.md){:target="\_blank"}.
+
+!!! important
+
+    Make sure to add your new module to the sidebar nav in the `mkdocs.yml`
+
+## Raising issues
+
+We have [Issue Templates](https://raw.githubusercontent.com/testcontainers/testcontainers-python/refs/heads/main/.github/ISSUE_TEMPLATE/new-container.md){:target="\_blank"} to cover most cases, please try to adhere to them, they will guide you through the process.
+Try to look through the existing issues before you raise a new one.
+
+## Releasing versions
+
+We have automated Semantic Versioning and release via [release-please](https://github.com/testcontainers/testcontainers-python/blob/main/.github/workflows/release-please.yml){:target="\_blank"}.
+This takes care of:
+
+- Detecting the next version, based on the commits that landed on `main`
+- When a Release PR has been merged
+  - Create a GitHub Release with the CHANGELOG included
+  - Update the [CHANGELOG](https://github.com/testcontainers/testcontainers-python/blob/main/CHANGELOG.md){:target="\_blank"}, similar to the GitHub Release
+  - Release to PyPI via a [trusted publisher](https://docs.pypi.org/trusted-publishers/using-a-publisher/){:target="\_blank"}
+  - Automatically script updates in files where it's needed instead of hand-crafting it (i.e. in `pyproject.toml`)
+
+!!!DANGER
+
+    Community modules are supported on a best-effort basis and for maintenance reasons, any change to them
+    is only covered under minor and patch changes.
+    Community modules changes DO NOT contribute to major version changes!
+    If your community module container was broken by a minor or patch version change, check out the change logs!
+
+## Documentation contributions
+
+The _Testcontainers for Go_ documentation is a static site built with [MkDocs](https://www.mkdocs.org/){:target="\_blank"}.
+We use the [Material for MkDocs](https://squidfunk.github.io/mkdocs-material/){:target="\_blank"} theme, which offers a number of useful extensions to MkDocs.
+
+We publish our documentation using Netlify.
+
+### Adding code snippets
+
+To include code snippets in the documentation, we use the [codeinclude plugin](https://github.com/rnorth/mkdocs-codeinclude-plugin){:target="\_blank"}, which uses the following syntax:
+
+> &lt;!--codeinclude--&gt;<br/> > &#91;Human readable title for snippet&#93;(./relative_path_to_example_code.go) targeting_expression<br/> > &#91;Human readable title for snippet&#93;(./relative_path_to_example_code.go) targeting_expression<br/> > &lt;!--/codeinclude--&gt;<br/>
+
+Where each title snippet in the same `codeinclude` block would represent a new tab
+in the snippet, and each `targeting_expression` would be:
+
+- `block:someString` or
+- `inside_block:someString`
+
+Please refer to the [codeinclude plugin documentation](https://github.com/rnorth/mkdocs-codeinclude-plugin){:target="\_blank"} for more information.
+
+### Previewing rendered content
+
+From the root directory of the repository, you can use the following command to build and serve the documentation locally:
+
+```shell
+make serve-docs
+```
+
+It will use a Docker container to install the required dependencies and start a local server at `http://localhost:8000`.
+
+Once finished, you can destroy the container with the following command:
+
+```shell
+make clean-docs
+```
+
+### PR preview deployments
+
+Note that documentation for pull requests will automatically be published by Netlify as 'deploy previews'.
+These deployment previews can be accessed via the `deploy/netlify` check that appears for each pull request.
+
+Please check the GitHub comment Netlify posts on the PR for the URL to the deployment preview.
diff --git a/docs/css/extra.css b/docs/css/extra.css
@@ -0,0 +1,136 @@
+h1, h2, h3, h4, h5, h6 {
+    font-family: 'Rubik', sans-serif;
+}
+
+[data-md-color-scheme="testcontainers"] {
+    --md-primary-fg-color:       #00bac2;
+    --md-accent-fg-color:        #361E5B;
+    --md-typeset-a-color:        #0C94AA;
+    --md-primary-fg-color--dark: #291A3F;
+    --md-default-fg-color--lightest: #F2F4FE;
+    --md-footer-fg-color: #361E5B;
+    --md-footer-fg-color--light: #746C8F;
+    --md-footer-fg-color--lighter: #C3BEDE;
+    --md-footer-bg-color: #F7F9FD;
+    --md-footer-bg-color--dark: #F7F9FD;
+}
+
+.card-grid {
+    display: grid;
+    gap: 10px;
+}
+
+.tc-version {
+    font-size: 1.1em;
+    text-align: center;
+    margin: 0;
+}
+
+@media (min-width: 680px) {
+    .card-grid {
+        grid-template-columns: repeat(3, 1fr);
+    }
+}
+
+body .card-grid-item {
+    display: flex;
+    align-items: center;
+    gap: 20px;
+    border: 1px solid #C3BEDE;
+    border-radius: 6px;
+    padding: 16px;
+    font-weight: 600;
+    color: #9991B5;
+    background: #F2F4FE;
+}
+
+body .card-grid-item:hover,
+body .card-grid-item:focus {
+    color: #9991B5;
+}
+
+.card-grid-item[href] {
+    color: var(--md-primary-fg-color--dark);
+    background: transparent;
+}
+
+.card-grid-item[href]:hover,
+.card-grid-item[href]:focus {
+    background: #F2F4FE;
+    color: var(--md-primary-fg-color--dark);
+}
+
+.community-callout-wrapper {
+    padding: 30px 10px 0 10px;
+}
+
+.community-callout {
+    color: #F2F4FE;
+    background: linear-gradient(10.88deg, rgba(102, 56, 242, 0.4) 9.56%, #6638F2 100%), #291A3F;
+    box-shadow: 0px 20px 45px rgba(#9991B5, 0.75);
+    border-radius: 10px;
+    padding: 20px;
+}
+
+.community-callout h2 {
+    font-size: 1.15em;
+    margin: 0 0 20px 0;
+    color: #F2F4FE;
+    text-align: center;
+}
+
+.community-callout ul {
+    list-style: none;
+    padding: 0;
+    display: flex;
+    justify-content: space-between;
+    gap: 10px;
+    margin-top: 20px;
+    margin-bottom: 0;
+}
+
+.community-callout a {
+    transition: opacity 0.2s ease;
+}
+
+.community-callout a:hover {
+    opacity: 0.5;
+}
+
+.community-callout a img {
+    height: 1.75em;
+    width: auto;
+    aspect-ratio: 1;
+}
+
+@media (min-width: 1220px) {
+    .community-callout-wrapper {
+       padding: 40px 0 0;
+    }
+
+    .community-callout h2 {
+        font-size: 1.25em;
+    }
+
+    .community-callout a img {
+        height: 2em;
+    }
+}
+
+@media (min-width: 1600px) {
+    .community-callout h2 {
+        font-size: 1.15em;
+    }
+
+    .community-callout a img {
+        height: 1.75em;
+    }
+}
+
+.md-typeset__table {
+    min-width: 100%;
+ }
+
+ .md-typeset table:not([class]) {
+    display: table;
+}
Original file line number	Diff line number	Diff line change
		@@ -0,0 +1,2 @@
		/search/search_index.json
		Access-Control-Allow-Origin: *