A Collection of Electronic Circuits, Simulations, and Modules.

ESPHome project for huawei r4850g2 rectifier with can bus control

Power Electronics projects done using Simscape Tool Box in MATLAB-Simulink based simulation.

This repository contains the 3D models developed for better visualization of generating energy by applying pressure on a piezoelectric shoe or "SmartFeet", which in turn is made up of 25 (or 26) piezoelectric sensors embedded in each shoe, a 47 μF/ 4.50V capacitor, a full wave bridge rectifier (four 1N914 diodes), a diode (also of model 1N914), …

MATLAB/Simulink model of a 3-Phase Fully Controlled Bridge Rectifier (6-pulse converter) with an RL load and simulation results.

Design of a Bridge Rectifier with Capacitor Filter for AC to DC Conversion

contains knowledgeable PCB layouts, schematics, formulas regarding the ripple factor of a half-wave rectifier

In this repository I am uploading the work I did on the project in analog circuits in which we constructed the circuit of 230v ac to 15v dc voltage regulator using bridge rectifier. I uploaded the final drafts of the project, both ppt and report.

Empleo del Diodo como rectificador. Guía de análisis con el efecto del condensador en el rizado del voltaje.

Feedforward Neural Network from scratch - backpropagation, gradient descent, activation functions

Simulador online de circuitos elétricos

My NGSPICE Codes during EE230 (Analog Circuits Lab) Autumn 2021-22

Design and simulation of a Full-Wave Bridge Rectifier Battery Charger using LTspice and NGSpice.

Three-phase phase-controlled full-wave rectifier with RL load

MATLAB/Simulink models for evaluating control-dependent SiC active rectifier performance in ultra-low-voltage, high-current electrowinning power supplies.

AC-DC power supply using a 10:1 transformer, full bridge rectifier, and voltage regulator. Power supply fed into the high current gain Darlington audio amplifier using BJT’s.

this repo contain simulations of various circuits

A sustainable system designed to harvest mechanical energy from vibrations or pressure using piezoelectric sensors, converting it into usable electrical energy for powering low-power devices in remote or inaccessible environments.

uncontrolled rectifier in matlab

AC DC 5 V power supply (bridge rectifier + reservoir capacitor + Zener referenced BJT pass stage); measured ripple ~9.7 mV p-p at 50 Ω (~100 mA).