Telink TLS825X 蓝牙芯片SDK

Telink fork of CSA's open-source Matter implementation (project-chip/connectedhomeip), with vendor support for Telink Matter SoCs. Telink develop and release branches are maintained in this fork.

Telink 蓝牙芯片SIG Mesh SDK，可对接天猫精灵，小爱同学等

安信可TB系列蓝牙模块烧录工具

L1 R1: Telink 48MHz BLE SoC (TLSR8258/TLSR8253/TLSR8251)

Collection of tools and code for reprogramming Tuya BLE smart lights (TYBT1) boards based on the TLSR8266 MCU with new Rust firmware.

Open ZMK firmware + reverse engineering for the Wobkey Rainy 75 Pro (Telink TLSR9511 / B91, RISC-V)

Home Assistant HACS integration for local control of Tuya BLE Mesh devices (Malmbergs BT Smart). Supports SIG Mesh and Telink proprietary mesh via WiFi/BLE bridge daemon.

L2 R2：Telink 96MHz RISC-V BLE/Matter SoC (TLSR9218/TLSR9215/TLSR9213)

Telink Manager, a Home Assistant panel to configure PVVX-firmware Telink BLE thermometers (ATC_MiThermometer family) over an ESPHome active Bluetooth proxy or a local adapter: read/write, snapshot/restore/clone, compare, bulk read, battery.

A fork of https://git.martb.dev/MartB/glc002-firmware . Replacement firmware source for the GL-C-002P from Gledopto, based on the official Telink SDK sample.

Watermeter Bluetooth BLE TLSR8253

Local control of Cync / C by GE smart lighting in Home Assistant - no cloud, no internet required

A gateway for controlling Telink Mesh lights from Home Assistant using MQTT.

BLE Advertisement controller for freetz (FRITZ!Box)

ESPHome component for controlling Smart LEDZ lights.

Local-first control for AwoX/EGLO BLE-mesh lamps: REST API, passive live status, scenes, and an MQTT/Home-Assistant bridge to Matter (SmartThings/Apple/Google/Alexa). .NET, Raspberry Pi & Windows.

Local BLE bridge from the SR16 smart ring to a private SQLite store. Vendor 0x15 HR-log history sync → local Ollama analysis → Telegram.

Control Tuya Beacon Mesh BLE ceiling lamps fully local from a Raspberry Pi. Forge command frames with btmgmt and drive them via CLI or MQTT bridge with Home Assistant auto discovery. First working reverse engineering of this protocol family.

Control a Xiaomi Mi Computer Monitor Light Bar (MJGJD01YL) from your PC over USB, using a cheap RF-NANO (Arduino Nano + nRF24L01) as a 2.4 GHz radio bridge — no Raspberry Pi and no original remote needed.