gsm module library for STM32 LL

gsm module library for STM32 LL

SIM800C GSM/GPRS Module 📶📱 designed using Altium 💻

A small Arduino library for GSM modules, that just works

Raspberry Pi Sim/GSM/GPRS Library - SIM900 and SIM800 Series

SIM800L, SIM800C and SIM800H GSM module library for the Raspberry Pi to send, receive, delete SMS messages, perform HTTP GET/POST requests and many additional queries

A notifier that forward your sms from chip sim800c.

SIM808 GPS/GPRS/GSM arduino Uno Send data to your sever The tracking is done by reading the GPS coordinates (longitude and latitude) and then sending them by using an HTTP request to a web server we used ARDUINO ide and server asp.net you can use any server PHP or ASP or...

OTA Update of ESP32 using SIM800C and AT commands

SIM800 HAL based library for simply SMS applications

Make the computer become a phone using ATK-SIM800C + Audio Repeater

SIM800_GSM_GPRS is an Arduino library for SIM800C/SIM800L modules. It enables sending/receiving SMS, making/answering calls, and performing HTTP GET/POST via GPRS. Compatible with Arduino, ESP32, and STM32, it offers simple APIs, network detection, IoT, IMEI retrieval, and event-driven SMS/call handling.

A phone module for the Ti-84 CE calculator, project uses python, bash, Ti-Basic, and C

Development board for SIM800C with integrated USB-to-Serial, PWRKEY, SIM holder, and audio interfaces.

Arduino sample codes for popular sensors.

STM32F407 cellular control prototype with SIM800C communication, DTMF handling, embedded HMI development, and hardware diagnostics.

Developed a Smart Irrigation and Water Management System using LPC2129, SIM800C GSM module, and a soil moisture sensor. The system monitors soil conditions and allows users to remotely control irrigation through SMS commands.

Africa's Talking Eris v1 Rev 2 Board/Kit MQTT Sample for STM32 Cube IDE

Test Call with GSM SIM800C with STM32 connected to PA2(TX) and PA3(RX) Power key is PA8 (Hold HIGH for 3 seconds, then LOW to power on GSM)