1. Install Visual Studio Code
2. Install PlatformIO Extension for VSCode
3. Install Logicrom Platform:
   • Open PlatformIO Home
   • Go to Platforms -> Embedded
   • Enter in search box "Logicrom"
   • Open "Logicrom Development Platform" and hit install

For complete installation guide visit: Installing Logicrom on PlatformIO

1. Hello World
2. OS Example
3. Console example
4. Timer example
5. GPIO example
6. UART example
7. ADC example
8. PWM example
9. SPI example
10. I2C example
11. Display example
12. GPS/GNSS example
13. Socket example
14. SSL Socket example
15. SSL Socket with Client Authentication
16. HTTP Client example

• Documentation - Logicrom OpenCPU SDK documentation for latest version

Logicrom is available in dual-license:

• Logicrom Personal License - Free for Personal use or Evaluation
• Logicrom Commercial License - Commercial Use

Following are simple steps to activate your device.

1. Register account on waybyte.in
2. Click on Register Free Device from left menu
3. Enter device details
4. Flash Logicrom core firmware
5. Put a valid SIM card in device
6. Turn on the device, It should accquire the license
   If device fail to do so, run "getlic" command from device console Port (USB Port 0 or Main UART) to try again.

If you face any issue, Please feel free to contact us @ support@waybyte.in or post your issue on github.

DFOTA is also supported for LTE modules

Footnotes

1. XX can be CN/AU/EU, YY can be AA/AB/AC ↩ ↩2 ↩3 ↩4

2. Supported on module with GNSS ↩

3. IMEI need to be configured when core is flashed for first time, use AT+EGMR=1,7,"imei" ↩