Blackmagic Wireless SWD Debug probe hosted on esp-idf SDK (for ESP8266) with UART on Telnet port and HTTP using xterm.js

低成本CMSIS-DAP V2调试器，IO时序SPI优化，速度级别200KB/S至450KB/S

Python tool for flashing and debugging STM32 devices using ST-LINK/V2

elaphureLink is a CMSIS-DAP compliant debugger solution for Arm® Keil® µVision® IDE that provides conversion between TCP/IP and DAP.

Programming internal SRAM over ARM Cortex M3 SWD

ARM ICE, JTAG, SWD

WIRELESS CMSIS-DAP USB/IP-SWD/JTAG HID adapter firmware for ESP8266 boards

Sensitive Words Detection 一个高性能的敏感词检测和过滤库，基于 Go 语言开发，采用整洁架构设计。专注于中文文本的敏感词检测，支持多种检测策略和灵活的扩展机制。

20 pin SWD/JTAG J-Link to 10 pin (0.1" and 0.05") reconfigurable Cortex-M header with power supply and TagConnect compatibility, as well as with a reset button. (Info about about J-Link Commander and Segger RTT is also given.)

Python SWD Debugging library for ST-Link/V2

Tiny wireless co-processor / programmer / debugger for ARM. Uses $3 WiFi module. Written in Rust.

Firmware for USBDM BDMs

FT232H-based JTAG, SWD, and AVR-ISP Programmer (Supported by OpenOCD and AVRDUDE)

CMSIS-DAP compliant debugging probe with SWD, JTAG, and VCP support

Use SWD debugging over USB-C debug accessory mode

OpenOCD that supports SWD over SPI on Raspberry Pi

A small bridge to link a SWD programmer to an AVX Open Ended Card Edge connector.

A Rust library for talking to J-Link USB devices

Open Source Hardware JTAG/SWD/UART/SWO interface board