A Hardware Hacking Tool with Web-Based CLI That Speaks Every Protocol

A bare metal programming guide (ARM microcontrollers)

A serial device I/O tool

Must-have verilog systemverilog modules

A Rust library that provides access to the Raspberry Pi's GPIO, I2C, PWM, SPI and UART peripherals.

A Swift library for hardware projects on Linux/ARM boards with support for GPIOs/SPI/I2C/PWM/UART/1Wire.

AT application for ESP32/ESP32-C2/ESP32-C3/ESP32-C6/ESP8266

ESPHome component to monitor and control a Jikong Battery Management System (JK-BMS) via UART-TTL or BLE

Various HDL (Verilog) IP Cores

CSerialPort - lightweight cross-platform serial port library and protocol parsing for C++/C/C#/Java/Python/Node.js/Electron/Rust

Arduino library to transfer dynamic, packetized data fast and reliably via Serial, I2C, etc.

A simple library for building and parsing data frames for serial interfaces (like UART / RS232)

UART bootloader for STM32 microcontroller.

Easy to use, GUI, BK7231T, BK7231N, RTL, etc flash tool and GPIO config extractor for beginners. Dedicated for Windows platform, but works on Linux with Mono. This tool can automatically download latest firmware (on user request) and then do a full BK backup and then write new flash cycle. This tool replaces old bkWriter 1.60 and hid_download_py.

STM32串口DMA模式发送&接收实现，高速串口通信（1.5Mbps）不丢数据

"RFCOMM for BLE" a Serial UART over Bluetooth low energy (4+) bridge for Linux, Mac and Windows

USB to 3 Port Serial (UART) adapter firmware for STM32 Blue Pill.

Android串口通讯助手，使用C++实现。

A simple, basic, formally verified UART controller

This repo includes 3 independent modules: UART receiver, UART transmitter, UART to AXI4 master. 本项目包含3个独立模块：UART接收器、UART发送器、UART转AXI4交互式调试器。