Standard NuttX with current PX4 patches

The FNET is a free, open source, dual TCP/IPv4 and IPv6 Stack (under Apache Version 2.0 license) for building embedded communication software on 32bit MCUs.

Collection of SDKs for NXP Controllers

Create and Share something with i.MX RT1050

iMX RT 1020 CPU module

Python module for easy development with i.MX platform

C++ header-only DSP library for Cortex-M

TRACE32-Scripts is a collection of board specific TRACE32 .cmm scripts(U-Boot/Linux via RNDIS)

Collect data and send to uper monitor. Run AI model.

Seeed code for the NXP i.MX RT Series crossover processor on Arduino

Rapid Prototyping Kit based on the iMX RT1011, featuring Arm Cortex-M7 @ 500 MHz, Rich features & peripherals, Easy-to-use Form Factor, Zephyr RTOS and CircuitPython support

A neopixel driver for Rust, based on NXP i.MX RT's FlexIO bus.

iMXRT CPU Support package

IMXRT1060-EVK + MCUXpressoIDE + AmazonFreeRTOS + FatFs + LwIP + LittlevGL

i.MX Smart Boot Tool based on pyIMX module

IEC61850 with FreeRTOS and LwIP on microcontrollers

Flight software for a thrust vector controlled hopper (EECS 473 major design experience project)

NXP i.MX RT1060 (MIMXRT1062, Cortex-M7) emulator in Rust — run real MadMachine SwiftIO, Zephyr and Arduino firmware for the SwiftIO Micro

Unofficial CMake/C++20 firmware SDK for the Theta Machines G2 Nano (i.MX RT1171, 1 GHz Cortex-M7): TinyUSB, FreeRTOS, LSM6DSV/LIS2MDL drivers. Turnkey FetchContent build.

【源码】2019年NXP智能车比赛的程序。